nuckolls.bob(at)aeroelect Guest
|
Posted: Thu Jan 09, 2014 7:06 am Post subject: Thoughts on a few electrical system configurations? |
|
|
At 04:37 PM 1/8/2014, you wrote:
Quote: |
David,
Suggest you also consider 60A primary alt. and 20A secondary alt.
Set the regulator on the secondary 0.5V lower than primary
regulator. I have this in my all glass RV10. After 3 years, I had a
primary alt. failure due to spun bearing shorting out the winding.
Bus voltage dropped 0.5V as expected; the secondary alt. picked up
the slack and we completed our flight at our leisure. With 20A I can
keep everything lit up indefinitely except my heated pitot and
landing lights. No bus switching or load shedding necessary.
|
This philosophy is described in Figure Z-12
which is representative of standby alternator
installations on what must now be more than a
thousand TC Bonanzas, Mooneys, Pipers and Cessnas.
Bob . . .
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|