Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Tp12 s

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

fraser221

Joined: 03 Feb 2008
Posts: 13

Posted: Wed Jan 15, 2014 12:43 pm Post subject: Tp12 s

can anyone help in identifying the material used in the construction of the TP 12 Drive plates as i need to have some custom ones made as they have worn and replacements are now a different size?



thanks

fraser

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

kjburns(at)btinternet.com
Guest

Posted: Wed Jan 15, 2014 2:44 pm Post subject: Tp12 s

Fraser,

Andy Draper at the LAA has a wealth of knowledge of the material specifications, including the interference fit of the TP 14 pins,  you remove the tp 12 fitting, by pulling these pins you will also have to go to the next oversize on these pins too, then ream your assembled parts to the correct interference fit, or you will find movement in the assembly when you re-fit.

If tp 12 pins are worn , I would also do an inspection and if worn replace tp 13, ( the socket that is bonded in to the tail plane) , if this assembly  is jigged together while bonding should take care of slight welding errors.

Regards,

Kevin



     

   From: fraser221 <vicflett(at)tiscali.co.uk>

 To: europa-list(at)matronics.com 

 Sent: Wednesday, 15 January 2014, 20:43

 Subject: Tp12 s

  

 

--> Europa-List message posted by: "fraser221" <vicflett(at)tiscali.co.uk (vicflett(at)tiscali.co.uk)>



can anyone help in identifying the material used in  the construction of the TP 12 Drive plates as i need to have some custom ones made as they have worn and replacements are now a different size?



thanks

fraser





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=416961#416961http://forums.matronics                    &nbsptronics.com/contribution" target="_blank">http://www.matronics.com/contri================

 

  

  

 [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum