Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

landing gear firestar

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
dany88



Joined: 13 Jan 2014
Posts: 25
PostPosted: Fri Jan 31, 2014 12:57 am    Post subject: landing gear firestar Reply with quote
How do I replace the main landing gear?
I unscrewed the bolt near the hub and the bolt inside the fuselage, but not sfilla the bar of aluminum.
Why?
how can I do?

I enclose a photo

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List


cel 4 015 (2).jpg
 Description:
 Filesize:  103.93 KB
 Viewed:  2145 Time(s)

cel 4 015 (2).jpg
cel 4 014 (2) (580x718).jpg
 Description:
 Filesize:  92.9 KB
 Viewed:  2145 Time(s)

cel 4 014 (2) (580x718).jpg
Back to top
View user's profile Send private message
rowedenny



Joined: 09 Mar 2008
Posts: 338
Location: Western PA
PostPosted: Fri Jan 31, 2014 2:19 am    Post subject: landing gear firestar Reply with quote
Dany
Try applying penetrating oil through the bolt holes inside the fuselage. It seems your gear legs are corroded to the steel sockets. Also apply some around the gear legs where they protrude from the steel sockets.
Raise the fuselage and put a steel rod or a screwdriver through the lower bolt hole that holds the axle socket to the gear leg and twist and pull from there. You may want to try tapping down on the steel rod or screwdriver with a hammer also.
Make sure you grease your new gear legs before assembly to avoid this in the future.

Dennis "Skid" Rowe
Mk3, 690L-70, Leechburg, PA

Quote:
On Jan 31, 2014, at 3:57 AM, "dany88" <danielecafaro(at)alice.it> wrote:



How do I replace the main landing gear?
I unscrewed the bolt near the hub and the bolt inside the fuselage, but not sfilla the bar of aluminum.
Why?
how can I do?

I enclose a photo




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=417933#417933




Attachments:

http://forums.matronics.com//files/cel_4_015_2_437.jpg
http://forums.matronics.com//files/cel_4_014_2_580x718_174.jpg









- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group