Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

TPDD and request for mod assistance.

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
tonyrenshaw268(at)gmail.c
Guest





PostPosted: Tue Mar 04, 2014 2:24 pm    Post subject: TPDD and request for mod assistance. Reply with quote

Hi,
This is my TPDD. You can’t really tell from the photo but the top of the tunnel has been turned into a hinged lid to the underside, where fuel selectors, pumps, etc are to be located. I have an Andair Gascolator on a shelf directly above this reinforced access, which is why it exists. HOWEVER, I could use it as a TPDD. I am using a clear marine deck access fitting with a plastic thread, however I have thought about modifying the lid such that I can screw it out, or in, and in that respect if the shelf was placed accordingly, I’d be able to remove it inflight for photography etc.
I’ve actually ditched that option to be honest though, with things like CO2 entering being my biggest concern. Still, if you were desperate for a TPDD, this would work fine.
Smile


P.S. I am challenged to replace the original strength with my mod. Immediately under the throttle slot I have a bulkhead, and it is misleading in the photo how far down the sides I have cut. At the back the side cuts run into the top, and at the front its about 150 mm deep, so the sidewalls of the tunnel are basically intact. I anticipate that the majority of the load is on the vertical faces of the tunnel, engine etc. however the fuselage also is a contributor to the entire load carrying of the engine. I think the flat top of the tunnel is more like the top flange of an I beam, pertinent in the load created with a G manoeuvre by the engine. Without that flange I am struggling to see if I can get the outcome I want, so if anyone has an idea I’d appreciate it. Still, the wide arse mods and the new profile has a negligible top web to this part of the tunnel, and if I don’t adopt those, which I don’t plan on doing, I have more side material in a vertical orientation than they do already, to compensate for the absence of the top web. Still, I plan on doing something, but what is the question.
[img]cid:1F7C7203-A08A-4F07-9489-F0D2342E3910[/img][img]cid:C10E039E-AA99-4CFE-AA90-CF90B6CF260D[/img]
TPDD = Toilet Paper Deployment Device


Tony Renshaw
Sydney Aussie


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List



TPDD.jpeg
 Description:
 Filesize:  32.79 KB
 Viewed:  1291 Time(s)

TPDD.jpeg



photo.jpeg
 Description:
 Filesize:  30.42 KB
 Viewed:  1291 Time(s)

photo.jpeg


Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group