Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Air Fill

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

Ernie

Joined: 11 Jan 2006
Posts: 513

Posted: Tue Jul 01, 2014 6:52 am Post subject: Air Fill

Can someone give me a parts source to make a scuba tank to Schrader valve hose. My last CJ had the original bayonet air fitting, so this is new ground for me. You would think being a certified scuba diver that I would know what you call the D fitting that attaches to the tank! 



Thanks

Ernie

CJ-6A

N6315T



  [quote][b]

jackpot

Joined: 13 Jul 2010
Posts: 65
Location: Las Vegas, Nevada

Posted: Tue Jul 01, 2014 7:16 am Post subject: Air Fill

Earnie. Contact a Scuba Shop. They have them. That is where I got mine. Gary. N22YK



Sent from my iPad



On Jul 1, 2014, at 7:52, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

[quote]Can someone give me a parts source to make a scuba tank to Schrader valve hose. My last CJ had the original bayonet air fitting, so this is new ground for me. You would think being a certified scuba diver that I would know what you call the D fitting that attaches to the tank! 



Thanks

Ernie

CJ-6A

N6315T



   	  Quote: 	
		  

	
   

[b]

dougsappllc(at)gmail.com
Guest

Posted: Tue Jul 01, 2014 7:32 am Post subject: Air Fill

Ernie,Or you could go to a vol. fire department and get/beg Â a obsolete air tank. Â Drill out and rethread the INSIDE of the fitting, make up the hose, and your good to go. Â Paul Lewis and I recently came up with this after I was given some obsolete air tanks. Â 

 



Doug



On Tue, Jul 1, 2014 at 7:52 AM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

 [quote]Can someone give me a parts source to make a scuba tank to Schrader valve hose. My last CJ had the original bayonet air fitting, so this is new ground for me. You would think being a certified scuba diver that I would know what you call the D fitting that attaches to the tank!  



Thanks

Ernie

CJ-6A

N6315T



   	  Quote: 	
		  



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	
[b]

Ernie

Joined: 11 Jan 2006
Posts: 513

Posted: Tue Jul 01, 2014 7:37 am Post subject: Air Fill

I've got scuba tanks. I just don't know where to buy the schrader valve adapter that threads on, like the FBO's use. I can't just go use a tire filler.





 



On Tue, Jul 1, 2014 at 11:32 AM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:

[quote] Ernie,Or you could go to a vol. fire department and get/beg Â a obsolete air tank. Â Drill out and rethread the INSIDE of the fitting, make up the hose, and your good to go. Â Paul Lewis and I recently came up with this after I was given some obsolete air tanks. Â 

  



Doug



On Tue, Jul 1, 2014 at 7:52 AM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

  

 	  Quote: 	
		  Can someone give me a parts source to make a scuba tank to Schrader valve hose. My last CJ had the original bayonet air fitting, so this is new ground for me. You would think being a certified scuba diver that I would know what you call the D fitting that attaches to the tank!   



Thanks

Ernie

CJ-6A

N6315T



  

 	  Quote: 	
		  



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	




et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	
[b]

KingCJ6(at)aol.com
Guest

Posted: Tue Jul 01, 2014 7:45 am Post subject: Air Fill

Is this what you mean: http://www.aircraftspruce.com/catalog/lgpages/gooseneck.php

  

 Dave

  

  In a message dated 7/1/2014 8:37:51 A.M. Pacific Daylight Time,  erniel29(at)gmail.com writes:

  	  Quote: 	
		     I've got scuba tanks. I just don't know where to buy the schrader    valve adapter that threads on, like the FBO's use. I can't just go use a tire    filler.    



   

   



   On Tue, Jul 1, 2014 at 11:32 AM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:

    	  Quote: 	
		       Ernie,      Or you could go to a vol. fire department and get/beg  a obsolete      air tank.  Drill out and rethread the INSIDE of the fitting, make up      the hose, and your good to go.  Paul Lewis and I recently came up with      this after I was given some obsolete air tanks.  

     



     Doug



     



          On Tue, Jul 1, 2014 at 7:52 AM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:



      	  Quote: 	
		                Can someone give me a parts source to make a scuba tank to        Schrader valve hose. My last CJ had the original bayonet air fitting, so        this is new ground for me. You would think being a certified scuba diver        that I would know what you call the D fitting that attaches to the tank!        



       Thanks

       



       Ernie

       



       CJ-6A

       N6315T

 	  Quote: 	
		  



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	




et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	




="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List

s.matronics.com/">http://forums.matronics.com

p://www.matronics.com/contribution">http://www.matronics.com/contribution



	
	


 [quote][b]

jackpot

Joined: 13 Jul 2010
Posts: 65
Location: Las Vegas, Nevada

Posted: Tue Jul 01, 2014 7:52 am Post subject: Air Fill

No but they have the yoke that fits the scuba bottle. You can get the Schroeder valve from aircraft spruce. Have the air line made to your specs at a hydraulic hose shop. Gary



Sent from my iPad



On Jul 1, 2014, at 8:32, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

[quote]Scuba shops wont have the schrader adapter.



Ernie

CJ-6A

N6315T

On Tue, Jul 1, 2014 at 11:15 AM, Gary Gabbard <ggg6(at)att.net (ggg6(at)att.net)> wrote:

   	  Quote: 	
		  Earnie. Contact a Scuba Shop. They have them. That is where I got mine. Gary. N22YK



Sent from my iPad

  

On Jul 1, 2014, at 7:52, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

 	  Quote: 	
		  Can someone give me a parts source to make a scuba tank to Schrader valve hose. My last CJ had the original bayonet air fitting, so this is new ground for me. You would think being a certified scuba diver that I would know what you call the D fitting that attaches to the tank!   



Thanks

Ernie

CJ-6A

N6315T



   	  Quote: 	
		  

	
   





3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



	




	


[b]

Ernie

Joined: 11 Jan 2006
Posts: 513

Posted: Tue Jul 01, 2014 7:56 am Post subject: Air Fill

Ahh.....Thanks!

On Tue, Jul 1, 2014 at 11:51 AM, Gary Gabbard <ggg6(at)att.net (ggg6(at)att.net)> wrote:

  	  Quote: 	
		  No but they have the yoke that fits the scuba bottle. You can get the Schroeder valve from aircraft spruce. Have the air line made to your specs at a hydraulic hose shop. Gary

 

Sent from my iPad



On Jul 1, 2014, at 8:32, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:



 	  Quote: 	
		   Scuba shops wont have the schrader adapter.



Ernie

CJ-6A



N6315T

 On Tue, Jul 1, 2014 at 11:15 AM, Gary Gabbard <ggg6(at)att.net (ggg6(at)att.net)> wrote:

  

 	  Quote: 	
		  Earnie. Contact a Scuba Shop. They have them. That is where I got mine. Gary. N22YK

 

Sent from my iPad

  



On Jul 1, 2014, at 7:52, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

 	  Quote: 	
		  Can someone give me a parts source to make a scuba tank to Schrader valve hose. My last CJ had the original bayonet air fitting, so this is new ground for me. You would think being a certified scuba diver that I would know what you call the D fitting that attaches to the tank!    



Thanks

Ernie

CJ-6A

N6315T



   	  Quote: 	
		  

	
   





3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



	




	


	
  	  Quote: 	
		  



3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



	




	




-- 

Ernie



Nanchang CJ-6A

N6315T



 

  [quote][b]

dougsappllc(at)gmail.com
Guest

Posted: Tue Jul 01, 2014 8:09 am Post subject: Air Fill

Drill and tap the fitting in the side of your CJ to accept the Schrader type male fitting which can be purchased at most any good hardware store. Â Then purchase a "goose neck hose coupling" from Spruce http://www.aircraftspruce.com/catalog/lgpages/gooseneck.php Â Make up the hose to go in between. 



Doug



On Tue, Jul 1, 2014 at 8:32 AM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

 [quote]Scuba shops wont have the schrader adapter.



Ernie

CJ-6A

 N6315T

On Tue, Jul 1, 2014 at 11:15 AM, Gary Gabbard <ggg6(at)att.net (ggg6(at)att.net)> wrote:

   

 	  Quote: 	
		  Earnie. Contact a Scuba Shop. They have them. That is where I got mine. Gary. N22YK

 

Sent from my iPad

  



On Jul 1, 2014, at 7:52, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

 	  Quote: 	
		  Can someone give me a parts source to make a scuba tank to Schrader valve hose. My last CJ had the original bayonet air fitting, so this is new ground for me. You would think being a certified scuba diver that I would know what you call the D fitting that attaches to the tank!    



Thanks

Ernie

CJ-6A

N6315T



   	  Quote: 	
		  

	
   





3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



	


	






   	  Quote: 	
		  



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	




[b]

Ernie

Joined: 11 Jan 2006
Posts: 513

Posted: Tue Jul 01, 2014 8:21 am Post subject: Air Fill

Plane is already fitted with schrader valve. My last one had the original bayonet (which I preferred).

On Tue, Jul 1, 2014 at 12:07 PM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:

  	  Quote: 	
		  Drill and tap the fitting in the side of your CJ to accept the Schrader type male fitting which can be purchased at most any good hardware store. Â Then purchase a "goose neck hose coupling" from Spruce http://www.aircraftspruce.com/catalog/lgpages/gooseneck.php Â Make up the hose to go in between.  



Doug



On Tue, Jul 1, 2014 at 8:32 AM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

  

 	  Quote: 	
		  Scuba shops wont have the schrader adapter.



Ernie



 

CJ-6A

 N6315T

On Tue, Jul 1, 2014 at 11:15 AM, Gary Gabbard <ggg6(at)att.net (ggg6(at)att.net)> wrote:

    

 	  Quote: 	
		  Earnie. Contact a Scuba Shop. They have them. That is where I got mine. Gary. N22YK

  

Sent from my iPad

  



On Jul 1, 2014, at 7:52, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:

 	  Quote: 	
		  Can someone give me a parts source to make a scuba tank to Schrader valve hose. My last CJ had the original bayonet air fitting, so this is new ground for me. You would think being a certified scuba diver that I would know what you call the D fitting that attaches to the tank!     



Thanks

Ernie

CJ-6A

N6315T



   	  Quote: 	
		  

	
   





3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



	


	




   	  Quote: 	
		  



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	




	


   	  Quote: 	
		  



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	




	




-- 

Ernie



Nanchang CJ-6A

N6315T



 

  [quote][b]

dsavarese0812(at)bellsout
Guest

Posted: Tue Jul 01, 2014 8:22 am Post subject: Air Fill

I buy mine from McMaster-Carr.  http://www.mcmaster.com/#schrader-valves/=sndiic        Part number 8063K31.  Remove the valve core before using.  It is a       low pressure valve core and you don't need it anyway because the       port is check valve protected.

       Dennis

        	  Quote: 	
		  A. Dennis Savarese

334-285-6263

334-546-8182 (mobile)

www.yak-52.com

Skype - Yakguy1 	
       On 7/1/2014 10:37 AM, Ernest Martinez wrote:

     

     [quote]       I've got scuba tanks. I just don't know where to         buy the schrader valve adapter that threads on, like the FBO's         use. I can't just go use a tire filler.         

         

         

         

       

                

         

         On Tue, Jul 1, 2014 at 11:32 AM, doug           sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)>           wrote:

            	  Quote: 	
		               Ernie,               Or you could go to a vol. fire department and get/beg                  a obsolete air tank.  Drill out and rethread the INSIDE                 of the fitting, make up the hose, and your good to go.                  Paul Lewis and I recently came up with this after I was                 given some obsolete air tanks.  

               

               

               Doug

             

             

               

                                On Tue, Jul 1, 2014 at 7:52 AM, Ernest                   Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)>                   wrote:

                 

                  	  Quote: 	
		                                          Can someone give me a parts source to                       make a scuba tank to Schrader valve hose. My last                       CJ had the original bayonet air fitting, so this                       is new ground for me. You would think being a                       certified scuba diver that I would know what you                       call the D fitting that attaches to the tank!                                                

                       

                       Thanks

                       

                       

                       Ernie

                       

                       

                       CJ-6A

                       N6315T

                     

                   

                    	  Quote: 	
		  



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	
                 



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	
           

	
     [b]

rmhou(at)yahoo.com
Guest

Posted: Tue Jul 01, 2014 8:40 am Post subject: Air Fill

Aircraft Spruce has them 

http://www.aircraftspruce.com/catalog/lgpages/gooseneck.php 

Sent from Yahoo Mail on Android                                                                                                                                                                                            From:                                                          Ernest Martinez <erniel29(at)gmail.com>;                            

                                                              To:                                                          yak-list <yak-list(at)matronics.com>;                                                                             

                                                              Subject:                                                          Re: Air Fill                            

                                                              Sent:                                                          Tue, Jul 1, 2014 3:37:18 PM                            

                         

                             

                                                                                                                                            I've got scuba tanks. I just don't know where to buy the schrader valve adapter that threads on, like the FBO's use. I can't just go use a tire filler.





 



On Tue, Jul 1, 2014 at 11:32 AM, doug sapp <[url=javascript:return]dougsappllc(at)gmail.com[/url]> wrote:

 	  Quote: 	
		   Ernie,Or you could go to a vol. fire department and get/beg  a obsolete air tank.  Drill out and rethread the INSIDE of the fitting, make up the hose, and your good to go.  Paul Lewis and I recently came up with this after I was given some obsolete air tanks.  

  



Doug



On Tue, Jul 1, 2014 at 7:52 AM, Ernest Martinez <[url=javascript:return]erniel29(at)gmail.com[/url]> wrote:

  

 	  Quote: 	
		  Can someone give me a parts source to make a scuba tank to Schrader valve hose. My last CJ had the original bayonet air fitting, so this is new ground for me. You would think being a certified scuba diver that I would know what you call the D fitting that attaches to the tank!   



Thanks

Ernie

CJ-6A

N6315T



  

 	  Quote: 	
		  


et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution


	



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution


	
[b]="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Net="_blank" href="http://forums.matronics.com">http://forums.matronics.-> 	
                                                                                                                        

                 

             

  [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum