Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Jae::::RE: Extra fuel

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
jdriggs49(at)msn.com
Guest





PostPosted: Wed Jun 25, 2014 7:28 pm    Post subject: Jae::::RE: Extra fuel Reply with quote

What are you using for a rear seat tank?

Quote:
Date: Wed, 25 Jun 2014 12:42:05 -0700
From: jc-matronics_rv10@jline.com
To: rv10-list@matronics.com
Subject: Re: RV10-List: Extra fuel

--> RV10-List message posted by: Jae Chang <jc-matronics_rv10@jline.com>

I got tired of flying solo and looking at all the empty space. I decided
to use the extra space and put a 32 gal aux fuel tank secured in a rear
passenger seat. I can remove or install it empty in about 10 mins. Once
you fly with the extra fuel, you will never ever want to go back! I was
able to fly SFO to Kansas to JYO in 15 hours total time or in 13 hours
of air time. I had some delays on my one planned fuel stop (actually
ended up being 2 because an FBO was closed), so i know i can do even
better next time. Even on shorter flights, it is nice not worrying about
getting fuel all the time.

My only disappointment is knowing that Van will never consider
engineering an extra fuel option. I would do that mod in a heartbeat!

Also, i considered keeping the extra fuel in the baggage compartment,
but i think the rear seat is better. Access to the baggage area is more
difficult for installing and removing. Also, it is potentially harder to
add fuel in the baggage area. I can easily add fuel if i want through
the big doors without much effort.

--
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011
do not archive


_-============================================================
_-= - The RV10-List Email Forum -
_-= Use the Matronics List Features Navigator to browse
_-= the many List utilities such as List Un/Subscription,
_-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
_-= Photoshare, and much much more:
_-=
_-= --> http://www.matronics.com/Navigator?RV10-List
_-=
_-============================================================
_-= - MATRONICS WEB FORUMS -
_-= Same great content also available via the Web Forums!
_-=
_-= --> http://forums.matronics.com
_-=
_-============================================================
_-= - List Contribution Web Site -
_-= Thank you for your generous support!
_-= -Matt Dralle, List Admin.
_-= --> http://www.matronics.com/contribution
_-============================================================




[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jchang10



Joined: 05 Jul 2006
Posts: 227

PostPosted: Thu Jun 26, 2014 8:19 am    Post subject: Jae::::RE: Extra fuel Reply with quote

On 6/25/2014 8:27 PM, Danny Riggs wrote:
Quote:
What are you using for a rear seat tank?

http://www.jegs.com/i/JEGS-Performance-Products/555/15505/10002/-1?parentProductId=837886

This is the fuel cell. KISS principle applies here.

http://www.vansairforce.com/community/showthread.php?t=96010
I don't have any good photos actually but nothing special. I started
with the thread above but bent my own tubing. I built a frame out of
wood (for now) for the tank to sit on and to secure it to. It's secured
into the airframe reusing the rear seat hinge and a couple of the
existing #8 screws around the seat area. Plumbed into the extra port on
stock vans valve. I used quick disconnects for all connections including
the external vent which is a must. I used extra plastic tubing to vent
to the wing root area similar to the main vent.

There are certainly many variations. However, even this simplest of
methods has worked out well. The one change i am contemplating is
converting the tank to a bottom outlet to minimize potential vapor
issues with the top draw.

--
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011
do not archive


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011
Back to top
View user's profile Send private message
jdriggs49(at)msn.com
Guest





PostPosted: Thu Jun 26, 2014 11:28 am    Post subject: Jae::::RE: Extra fuel Reply with quote

Thanks Jae!
I'm the RV10 builder you met on the shuttle bus from KAVX to Avalon harbor a couple of years ago. Dan Riggs

Quote:
Date: Thu, 26 Jun 2014 09:18:26 -0700
From: jc-matronics_rv10@jline.com
To: rv10-list@matronics.com
Subject: Re: Jae::::RE: RV10-List: Extra fuel

--> RV10-List message posted by: Jae Chang <jc-matronics_rv10@jline.com>

On 6/25/2014 8:27 PM, Danny Riggs wrote:
> What are you using for a rear seat tank?
>
http://www.jegs.com/i/JEGS-Performance-Products/555/15505/10002/-1?parentProductId=837886
This is the fuel cell. KISS principle applies here.

http://www.vansairforce.com/community/showthread.php?t=96010
I don't have any good photos actually but nothing special. I started
with the thread above but bent my own tubing. I built a frame out of
wood (for now) for the tank to sit on and to secure it to. It's secured
into the airframe reusing the rear seat hinge and a couple of the
existing #8 screws around the seat area. Plumbed into the extra port on
stock vans valve. I used quick disconnects for all connections including
the external vent which is a must. I used extra plastic tubing to vent
to the wing root area similar to the main vent.

There are certainly many variations. However, even this simplest of
methods has worked out well. The one change i am contemplating is
converting the tank to a bottom outlet to minimize potential vapor
issues with the top draw.

--
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011
do not archive


_-============================================================
_-= - The RV10-List Email Forum -
_-= Use the Matronics List Features Navigator to browse
_-= the many List utilities such as List Un/Subscription,
_-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
_-= Photoshare, and much much more:
_-=
_-= --> http://www.matronics.com/Navigator?RV10-List
_-=
_-============================================================
_-= - MATRONICS WEB FORUMS -
_-= Same great content also available via the Web Forums!
_-=
_-= --> http://forums.matronics.com
_-=
_-============================================================
_-= - List Contribution Web Site -
_-= Thank you for your generous support!
_-= -Matt Dralle, List Admin.
_-= --> http://www.matronics.com/contribution
_-============================================================




[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group