Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

WD-40 As a Lubricant

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
bakerocb



Joined: 15 Jan 2006
Posts: 727
Location: FAIRFAX VA

PostPosted: Tue Jul 29, 2014 3:59 am    Post subject: WD-40 As a Lubricant Reply with quote

7/29/2014

Hello All, David Lloyd wrote: “Don't use WD-40. It congeals after time and in a long cable drive that is
bad situation.”

Amen to that. In fact don’t use original plain WD-40 as a lubricant, that is a self defeating action. It is true that original plain WD-40 may free up some mechanism initially (as would almost any low viscosity fluid, even water), but the longer term effect will not be lubricating in nature. Spraying original plain WD-40 may even wash away what little lubrication that remains in the mechanism making the longer term situation worse.

Original plain WD-40 is a great product for doing just exactly what it was designed to do, displace water. That is why it is called W(ater) D(isplacing) – 40. When people began to mistakenly spray it as a lubricant and initially got some lubricating effect the WD-40 marketing people jumped on the bandwagon and began to claim lubricating properties for that product in their advertisement and labeling.

Now the WD-40 company has some specialty products that may be suitable for your lubrication use. See here:

http://www.wd40specialist.com/products

But don’t be sucked into using original plain WD-40 as a lubricant, use a true lubricating product.

OC

================================

Time: 02:30:26 PM PST US
From: "David Lloyd" <skywagon(at)charter.net>
Subject: Re: speedometer, not tachometer question
Sacha,

If, indeed it is cable drive, that is probably the problem.
The cable drive interior gets dry over time and lots of friction develops.
Figure out a way to disconnect the top end of the cable and spray a silicon
based spray or similar down the interior of it.
It will take some time to work the lubricant down a tight cable.
Don't use WD-40. It congeals after time and in a long cable drive that is
bad situation. David

[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group