 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
richard.goode(at)russiana
Guest
|
 Posted: Mon Sep 01, 2014 1:53 am Post subject: AK-50 A and T compressors |
 |
|
I noted that someone was asking for an explanation of the differences between the two compressors.
Firstly, the standard compressor as fitted to the M 14 P is the AK-50A, and the differences between the two models are totally within the piston and piston rings, which are of different sizes, and therefore not interchangeable.
Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Hereford
HR5 3LW
Tel: +44 (0) 1544 340120
Fax: +44 (0) 1544 340129
www.russianaeros.com
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
gardcycl
Joined: 30 May 2012
Posts: 9
Location: Brisbane, Australia
|
| Posted: Mon Sep 01, 2014 1:30 pm Post subject: AK-50 A and T compressors |
|
|
Does that mean the larger Cylinder, piston ring assembly still fit the AK-50A cases or Bolt pattern varies also and hence a no go
I had heard the T has a higher output?
Regards Peter Gardiner
PETER GARDINER ENT.PTY.LTD
BRISBANE, QLD.
Australia
61 417646838
From: richard.goode(at)russianaeros.com
To: yak-list(at)matronics.com
Subject: AK-50 A and T compressors
Date: Mon, 1 Sep 2014 10:51:32 +0100
I noted that someone was asking for an explanation of the differences between the two compressors.
Firstly, the standard compressor as fitted to the M 14 P is the AK-50A, and the differences between the two models are totally within the piston and piston rings, which are of different sizes, and therefore not interchangeable.
Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Hereford
HR5 3LW
Tel: +44 (0) 1544 340120
Fax: +44 (0) 1544 340129
www.russianaeros.com
[quote]
===========
rget="_blank">http://www.matronics.com/Navigator?Yak-List
===========
http://forums.matronics.com
===========
="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
richard.goode(at)russiana
Guest
|
| Posted: Mon Sep 01, 2014 10:31 pm Post subject: AK-50 A and T compressors |
|
|
It is actually quite complex, and I'm the first to admit that I'm not a total expert, and merely asked my partners at Aerometal in Hungary.
There are actually two versions of the AK50T, the – 30 and the – 39. The – 30 has a 1 mm larger cylinder, and a different bolt pattern. Also the – 30 has a 1.5 mm thickness rings as opposed to 2.0 millimetre thickness of the – 39.
As far as I can see, all these parts are not interchangeable!
Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Hereford
HR5 3LW
Tel: +44 (0) 1544 340120
Fax: +44 (0) 1544 340129
www.russianaeros.com
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Peter Gardiner
Sent: 01 September 2014 22:29
To: Yak-List Discussions
Subject: RE: AK-50 A and T compressors
Does that mean the larger Cylinder, piston ring assembly still fit the AK-50A cases or Bolt pattern varies also and hence a no go
I had heard the T has a higher output?
Regards Peter Gardiner
PETER GARDINER ENT.PTY.LTD
BRISBANE, QLD.
Australia
61 417646838
From: richard.goode(at)russianaeros.com (richard.goode(at)russianaeros.com)
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: AK-50 A and T compressors
Date: Mon, 1 Sep 2014 10:51:32 +0100
I noted that someone was asking for an explanation of the differences between the two compressors.
Firstly, the standard compressor as fitted to the M 14 P is the AK-50A, and the differences between the two models are totally within the piston and piston rings, which are of different sizes, and therefore not interchangeable.
Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Hereford
HR5 3LW
Tel: +44 (0) 1544 340120
Fax: +44 (0) 1544 340129
www.russianaeros.com
012345678901234567
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
flier
Joined: 09 Jul 2007
Posts: 25
|
| Posted: Tue Sep 02, 2014 6:55 am Post subject: Re: AK-50 A and T compressors |
|
|
Thanks Richard.
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
dougsappllc(at)gmail.com
Guest
|
| Posted: Tue Sep 02, 2014 11:08 am Post subject: AK-50 A and T compressors |
|
|
Compressor wisdom:We have found that the KY2 series of Chinese compressors will interchange with the Russian compressors if the "clock" position of the barrel is changed (rotated). Â This is a very simple task which allows the sometimes lower cost Chinese compressor to be used on most all "Yak" installations.
Doug
On Mon, Sep 1, 2014 at 11:30 PM, Richard Goode <richard.goode(at)russianaeros.com (richard.goode(at)russianaeros.com)> wrote:
[quote]
It is actually quite complex, and I'm the first to admit that I'm not a total expert, and merely asked my partners at Aerometal in Hungary.
Â
There are actually two versions of the AK50T, the – 30 and the – 39. The – 30 has a 1 mm larger cylinder, and a different bolt pattern. Also the – 30 has a 1.5 mm thickness rings as opposed to 2.0 millimetre thickness of the – 39.
Â
As far as I can see, all these parts are not interchangeable!
Â
Â
Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Hereford
HR5 3LW
Â
Tel:Â [url=tel:%2B44%20%280%29%201544%20340120]+44 (0) 1544 340120[/url]
Fax: [url=tel:%2B44%20%280%29%201544%20340129]+44 (0) 1544 340129[/url]
www.russianaeros.com
Â
From: owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com) [mailto:owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com)] On Behalf Of Peter Gardiner
Sent: 01 September 2014 22:29
To: Yak-List Discussions
Subject: RE: AK-50 A and T compressors
Â
Does that mean the larger Cylinder, piston ring assembly still fit the AK-50A cases or Bolt pattern varies also and hence a no go
I had heard the TÂ has a higher output?
Regards Peter Gardiner
Â
PETER GARDINER ENT.PTY.LTD
BRISBANE, QLD.
Australia
61 417646838
Â
From: richard.goode(at)russianaeros.com (richard.goode(at)russianaeros.com)
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: AK-50 A and T compressors
Date: Mon, 1 Sep 2014 10:51:32 +0100
I noted that someone was asking for an explanation of the differences between the two compressors.
Â
Firstly, the standard compressor as fitted to the M 14 P is the AK-50A, and the differences between the two models are totally within the piston and piston rings, which are of different sizes, and therefore not interchangeable.
Â
Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Hereford
HR5 3LW
Â
Tel:Â [url=tel:%2B44%20%280%29%201544%20340120]+44 (0) 1544 340120[/url]
Fax: [url=tel:%2B44%20%280%29%201544%20340129]+44 (0) 1544 340129[/url]
www.russianaeros.com
Â
0123456 78 901 2345 67
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
8
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
