Matronics Email Lists :: View topic - Zenith601-List Digest: 0 Msgs

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Zenith601-List Digest: 0 Msgs - 08/30/14

Matronics Email Lists Forum Index -> Zenith601-List

View previous topic :: View next topic

Author Message

mvarelasartal(at)yahoo.es
Guest

Posted: Fri Sep 05, 2014 12:46 am Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14

Hi to all,

I´m going to start to Weld the 4130 parts (brakes, engine jig, etc...) What you recommend for tig Weld, ER70 or ER80 and which size?

Thanks to all in advance.....

Marcos Varela

CH601 HD

Spain

 

     El Domingo 31 de agosto de 2014 9:13, Zenith601-List Digest Server <zenith601-list(at)matronics.com>  escribió:

  

  



 *



 =========================

   Online Versions of Today's List Digest Archive

 =========================



Today's complete Zenith601-List Digest can also be found in either of the 

two Web Links listed below.  The .html file includes the Digest formatted 

in HTML for viewing with a web browser and features Hyperlinked Indexes 

and Message Navigation.  The .txt file includes the plain ASCII version 

of the Zenith601-List Digest and can be viewed with a generic text editor 

such as Notepad or with a web browser. 



HTML Version:



    http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2014-08-30&Archive=Zenith601



Text Version:



    http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2014-08-30&Archive=Zenith601

 =======================

   EMail Version of Today's List Digest Archive

 =======================



 

           ----------------------------------------------------------

                           Zenith601-List Digest Archive

                                       ---

                     Total Messages Posted Sat 08/30/14: 0

           ----------------------------------------------------------

 

 

Today's Message Index:

----------------------

 

 nith601-List" target="_blank">http://www.matronics.com/Navigator?Zenith60bsp;         ums.matronics.com/" target="_blank">http://forums.matronics.com/

_;                   -Matt Dralcontribution" target="_blank">http://www.matronics.com/contribution

- The Matronics Zenith601-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List

psm(at)att.net
Guest

Posted: Fri Sep 05, 2014 4:07 am Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14

Hi Marcos,

       

       I built a Buttercup fuselage using 4130 and ER70S2 filler rods.        It was a while ago so I am not sure of the filler rod sizes I used       but I think I used 1/16 for most of the work.  The filler rod       should be selected for the thickness of the pieces being joined.

       

       Paul

       Camas, WA, USA

       

       On 9/5/2014 1:42 AM, Marcos Varela Sartal wrote:

     

     [quote]                Hi to all,

         I´m going to start to Weld the 4130 parts             (brakes, engine jig, etc...) What you recommend for tig             Weld, ER70 or ER80 and which size?

         Thanks to all in advance.....

         Marcos Varela

         CH601 HD

         Spain

                      

       

     [b]

- The Matronics Zenith601-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List

larrycmcfarland(at)gmail.
Guest

Posted: Fri Sep 05, 2014 5:31 am Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14

Marcos,

I’d recommend ER70 and .050 diameter weld rod

Less the chance of cold welds.  ER 70 will alloy with 4130 and give a better weld.

 

Larry McFarland

www.macsmachine.com

 

 

From: owner-zenith601-list-server(at)matronics.com [mailto:owner-zenith601-list-server(at)matronics.com] On Behalf Of Marcos Varela Sartal

Sent: Friday, September 05, 2014 3:42 AM

To: zenith601-list(at)matronics.com

Subject: Re: Zenith601-List Digest: 0 Msgs - 08/30/14

 

Hi to all,



I´m going to start to Weld the 4130 parts (brakes, engine jig, etc...) What you recommend for tig Weld, ER70 or ER80 and which size?



Thanks to all in advance.....



Marcos Varela



CH601 HD



Spain



 



El Domingo 31 de agosto de 2014 9:13, Zenith601-List Digest Server <zenith601-list(at)matronics.com (zenith601-list(at)matronics.com)> escribió:



 

*



=========================

  Online Versions of Today's List Digest Archive

=========================



Today's complete Zenith601-List Digest can also be found in either of the 

two Web Links listed below.  The .html file includes the Digest formatted 

in HTML for viewing with a web browser and features Hyperlinked Indexes 

and Message Navigation.  The .txt file includes the plain ASCII version 

of the Zenith601-List Digest and can be viewed with a generic text editor 

such as Notepad or with a web browser. 



HTML Version:



    http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2014-08-30&Archive=Zenith601



Text Version:



    http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2014-08-30&Archive=Zenith601

=======================

  EMail Version of Today's List Digest Archive

=======================

          ----------------------------------------------------------

                          Zenith601-List Digest Archive

                                      ---

                    Total Messages Posted Sat 08/30/14: 0

          ----------------------------------------------------------

Today's Message Index:

----------------------



nith601-List" target="_blank">http://www.matronics.com/Navigator?Zenith60bsp;         ums.matronics.com/" target="_blank">http://forums.matronics.com/

_;                   -Matt Dralcontribution" target="_blank">http://www.matronics.com/contribution









 	  Quote: 	
		    http://www.matronics.com/Navigator?Zenith601-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

  [quote][b]

- The Matronics Zenith601-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List

mvarelasartal(at)yahoo.es
Guest

Posted: Fri Sep 05, 2014 2:39 pm Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14

Thanks a lot for the information. IÂ´ll order ER70 to start welding brake pedals and control bar.

Here some pictures of my progress....

My Best Regards

 

      El Viernes 5 de septiembre de 2014 15:36, Larry McFarland <larrycmcfarland(at)gmail.com> escribiÃ³:

  

  



  Marcos,

Iâ€™d recommend ER70 and .050 diameter weld rod

Less the chance of cold welds.  ER 70 will alloy with 4130 and give a better weld.

  

Larry McFarland

http://www.macsmachine.com/

  

  

From: owner-zenith601-list-server(at)matronics.com  [mailto:owner-zenith601-list-server(at)matronics.com] On Behalf Of Marcos Varela Sartal

Sent: Friday, September 05, 2014 3:42 AM

To: zenith601-list(at)matronics.com

Subject: Re: Zenith601-List Digest: 0 Msgs - 08/30/14

  

Hi to all,



IÂ´m going to start to Weld the 4130 parts (brakes, engine jig, etc...) What you recommend for tig Weld, ER70 or ER80 and which size?



Thanks to all in advance.....



Marcos Varela



CH601 HD



Spain



  



El Domingo 31 de agosto de 2014 9:13, Zenith601-List Digest Server <zenith601-list(at)matronics.com (zenith601-list(at)matronics.com)> escribiÃ³:



  

*



=========================

  Online Versions of Today's List Digest Archive

=========================



Today's complete Zenith601-List Digest can also be found in either of the 

two Web Links listed below.  The .html file includes the Digest formatted 

in HTML for viewing with a web browser and features Hyperlinked Indexes 

and Message Navigation.  The .txt file includes the plain ASCII version 

of  the Zenith601-List Digest and can be viewed with a generic text editor 

such as Notepad or with a web browser. 



HTML Version:



    http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2014-08-30&Archive=Zenith601



Text Version:



    http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2014-08-30&Archive=Zenith601

=======================

  EMail Version of Today's List Digest Archive

=======================

           ----------------------------------------------------------

                          Zenith601-List Digest Archive

                                      ---

                    Total Messages Posted Sat 08/30/14: 0

          ----------------------------------------------------------

Today's Message Index:

----------------------



nith601-List" target="_blank">http://www.matronics.com/Navigator?Zenith60bsp;         ums.matronics.com/" target="_blank">http://forums.matronics.com/

_;                    -Matt Dralcontribution" target="_blank">http://www.matronics.com/contribution







 	  Quote: 	
		    

  http://www.matronics.com/Navigator?Zenith601-List

  	
0 	  Quote: 	
		  

  	
1 	  Quote: 	
		  

  	
2 	  Quote: 	
		  

  	
3 	  Quote: 	
		  

  	
4 	  Quote: 	
		  

  	
5 	  Quote: 	
		  

  	
6 	  Quote: 	
		  

  	
7 	  Quote: 	
		  

  	
8 	  Quote: 	
		  

  	
9

    	  Quote: 	
		  	
0

- The Matronics Zenith601-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List

IMG_2853.JPG

Description:

Filesize:

150.03 KB

Viewed:

5324 Time(s)

IMG_2319.JPG

Description:

Filesize:

142.69 KB

Viewed:

5324 Time(s)

larrycmcfarland(at)gmail.
Guest

Posted: Sat Sep 06, 2014 5:33 am Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14

Beautiful work Marcos,

The 601 is a great project that satisfies during the build process.

If my website can be of any assist in your fabrication process,

do visit and send questions if needed.

 Best regards,

 

Larry McFarland

 

From: owner-zenith601-list-server(at)matronics.com [mailto:owner-zenith601-list-server(at)matronics.com] On Behalf Of Marcos Varela Sartal

Sent: Friday, September 05, 2014 5:35 PM

To: zenith601-list(at)matronics.com

Subject: Re: Re: Zenith601-List Digest: 0 Msgs - 08/30/14

 

Thanks a lot for the information. IÂ´ll order ER70 to start welding brake pedals and control bar.



Here some pictures of my progress....



My Best Regards



 



El Viernes 5 de septiembre de 2014 15:36, Larry McFarland <larrycmcfarland(at)gmail.com> escribiÃ³:



 

Marcos,



Iâ€™d recommend ER70 and .050 diameter weld rod



Less the chance of cold welds.  ER 70 will alloy with 4130 and give a better weld.



 



Larry McFarland



http://www.macsmachine.com/



 



 



From: owner-zenith601-list-server(at)matronics.com [mailto:owner-zenith601-list-server(at)matronics.com] On Behalf Of Marcos Varela Sartal

Sent: Friday, September 05, 2014 3:42 AM

To: zenith601-list(at)matronics.com

Subject: Re: Zenith601-List Digest: 0 Msgs - 08/30/14



 



Hi to all,

IÂ´m going to start to Weld the 4130 parts (brakes, engine jig, etc...) What you recommend for tig Weld, ER70 or ER80 and which size?

Thanks to all in advance.....

Marcos Varela

CH601 HD

Spain

 

El Domingo 31 de agosto de 2014 9:13, Zenith601-List Digest Server <zenith601-list(at)matronics.com (zenith601-list(at)matronics.com)> escribiÃ³:

 



*



=========================

  Online Versions of Today's List Digest Archive

=========================



Today's complete Zenith601-List Digest can also be found in either of the 

two Web Links listed below.  The .html file includes the Digest formatted 

in HTML for viewing with a web browser and features Hyperlinked Indexes 

and Message Navigation.  The .txt file includes the plain ASCII version 

of the Zenith601-List Digest and can be viewed with a generic text editor 

such as Notepad or with a web browser. 



HTML Version:



    http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2014-08-30&Archive=Zenith601



Text Version:



    http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2014-08-30&Archive=Zenith601

=======================

  EMail Version of Today's List Digest Archive

=======================

          ----------------------------------------------------------

                          Zenith601-List Digest Archive

                                      ---

                    Total Messages Posted Sat 08/30/14: 0

          ----------------------------------------------------------

Today's Message Index:

----------------------



nith601-List" target="_blank">http://www.matronics.com/Navigator?Zenith60bsp;         ums.matronics.com/" target="_blank">http://forums.matronics.com/

_;                   -Matt Dralcontribution" target="_blank">http://www.matronics.com/contribution









[quote]     http://www.matronics.com/Navigator?Zenith601-Listhttp://forums.matronics.comhttp://www.matronics.com/contribution  http://www.matronics.com/========================forums.matronics.com/" target="_blank" rel="nofollow">http://forums.mat=Â Â  --> [b]

- The Matronics Zenith601-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith601-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum