 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
handainc(at)madisoncounty
Guest
|
 Posted: Sun Oct 12, 2014 3:44 pm Post subject: AN 3087-8 Connector |
 |
|
What is the proper way to install an AN 3087-8 Connector on a 5 wire cable? Can the connector be removed and reused? I've got to replace the power cable on my Tig welder.
M. Haught
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
nuckolls.bob(at)aeroelect
Guest
|
| Posted: Mon Oct 13, 2014 2:49 am Post subject: AN 3087-8 Connector |
|
|
At 18:42 2014-10-12, you wrote:
| Quote: | --> AeroElectric-List message posted by: "H.Marvin Haught" <handainc(at)madisoncounty.net>
What is the proper way to install an AN 3087-8 Connector on a 5 wire cable? Can the connector be removed and reused? I've got to replace the power cable on my Tig welder. |
Are you sure the number isn't AN3057-8?
The 3057 strain-relief fits a variety of connectors. The
most common being the MIL-C-5015 series devices that
have been around since WWII. They are offered in both
soldered and crimped contacts.
The strain relief is threaded onto the back shell
which is, in turn, threaded onto the connector
housing.
[img]cid:.0[/img]
If your connector is soldered, then yes, it's easy
to de-solder the wires and re-use the connector. The
crimped pins cannot be salvaged. With the right tools,
you can extract the pins and use the original housing
to take new pins crimped to your replacement wire.
Check out the catalog from my website here . . .
http://tinyurl.com/ohxmtzc
Find out which contact arrangement is appropriate
to your connector. You may be able to find another
number stamped onto the connector retaining ring
that will help you define the size and insert. For
example, the connector above has an 18-1 insert as
described on page 12 of the catalog.
If your existing connector is crimped, the short path
to success is probably to replace it with it's solder-on
brother.
Newark Electronics is one of many sources for
these connectors . . . should you find that replacement
is preferable to salvage . . .
http://tinyurl.com/p6x5jbo
They're not a terribly expensive connector . . .
Bob . . .
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
| Description: |
|
| Filesize: |
44.21 KB |
| Viewed: |
1160 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
