Matronics Email Lists :: View topic - Leaning out the Victor 1+

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Leaning out the Victor 1+

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

jbhart(at)onlyinternet.ne
Guest

Posted: Thu Jul 06, 2006 5:39 pm Post subject: Leaning out the Victor 1+

FireFlyers & Kolbers,



I have finished Bing leaning out studies for the Victor 1+.  Basically, I 

have been able to validate the fuel consumption curve provided by Speedwing, 

the North American engine distributor for Simonini.  When I can keep the EGT 

up the engine walks the line.  I do not believe it is possible to fly my 

engine and obtain the fuel flow rates that Simonini publishes.



I have added an update to the bottom of:



http://www.thirdshift.com/jack/firefly/firefly121.html



The next problem is how to keep the EGT up without having to fool around 

with the needle, shims and clip, and do it while in the air.  I am going to 

revisit variable pressure reduction over the float bowl.



------------------------------



I hope all had a good July 4th.  Big family gathering here at my daughter's 

house.  Typically, I do a flyby but the weather was horrible.  But the sun 

broke through and opened a thirty minute window, and so I got to fly.



Jack B. Hart FF004

Winchester, IN



Do not archive

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Richard Pike

Joined: 09 Jan 2006
Posts: 1670
Location: Blountville, Tennessee

Posted: Thu Jul 06, 2006 6:00 pm Post subject: Leaning out the Victor 1+

Jack, I have most of the important parts for a Dial-A -Jet kit in my 

garage, and just reading between the lines of what you are doing, if you 

could run a way to adjust the Dial-A-Jet while in flight, (Old 

speedometer cable?) you might be able to get your mixture to do what you 

want.

Send me your address and I'll box it up and send it to you, it's yours 

if you want it.

Here are some details of the thing -

http://www.thunderproducts.com/dial_a_jet.htm



Richard Pike

MKIII N420P (420ldPoops)



Jack B. Hart wrote:

 	  Quote: 	
		   



 FireFlyers & Kolbers,



 I have finished Bing leaning out studies for the Victor 1+.  Basically, I 

 have been able to validate the fuel consumption curve provided by Speedwing, 

 the North American engine distributor for Simonini.  When I can keep the EGT 

 up the engine walks the line.  I do not believe it is possible to fly my 

 engine and obtain the fuel flow rates that Simonini publishes.



 I have added an update to the bottom of:



 http://www.thirdshift.com/jack/firefly/firefly121.html



 The next problem is how to keep the EGT up without having to fool around 

 with the needle, shims and clip, and do it while in the air.  I am going to 

 revisit variable pressure reduction over the float bowl.



 ------------------------------



 I hope all had a good July 4th.  Big family gathering here at my daughter's 

 house.  Typically, I do a flyby but the weather was horrible.  But the sun 

 broke through and opened a thirty minute window, and so I got to fly.



 Jack B. Hart FF004

 Winchester, IN



 Do not archive

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum