Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

One Man Rigging Tip

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
Dave Bigelow



Joined: 29 Jan 2006
Posts: 103
Location: Kamuela, Hawaii

PostPosted: Tue Jul 04, 2006 7:36 pm    Post subject: One Man Rigging Tip Reply with quote

Here's a way that makes it easier to self-rig my FS2. Cut out a notch in the bottom of each wing main spar tab (see photo) about one diameter of the attach hole deep.

Before unfolding the wing, put both main spar pins into the fittings on the cage. Unfold the wing and swing it into position. Drop the notch over the pin, and lay the wing tip down onto that piece of foam or rug you are carrying under your arm. Go to the cage, lift the wing slightly off the notch, pull the pin, and reinsert through the hole. Safety the pin.

Lift the wing tip and walk down the leading edge until even with the wing strut end (other end is already attached to the cage). Pick up the end of the strut with your foot, and insert and safety the pin.

Forgive me if you already are doing it this way - just a tip for those who are still trying to figure out an easier way.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



FS2 Main Spar Tab.jpg
 Description:
Wing Main Spar Tab With Notch for Easier Self-Rigging
 Filesize:  37.27 KB
 Viewed:  257 Time(s)

FS2 Main Spar Tab.jpg



_________________
Dave Bigelow
Kamuela, Hawaii
FS2, HKS 700E
Back to top
View user's profile Send private message
ElleryWeld(at)AOL.COM
Guest





PostPosted: Wed Jul 05, 2006 6:30 pm    Post subject: One Man Rigging Tip Reply with quote

I built a kickstand to hold my wings up in place using the fold hold bracket mounted on the bottom of the wing it works great for me if any one wants to see pictures I will get some the next time I go flying

Ellery in Maine
do not archive


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group