Matronics Email Lists :: View topic - Warpdrive Torque settings

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Warpdrive Torque settings

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

hurstkr(at)growzone.com.a
Guest

Posted: Mon Jul 10, 2006 4:03 am Post subject: Warpdrive Torque settings

 	  Quote: 	
		   Hi , i can't seem to find the torque settings for the bolts on the warp 

 drive propellor & prop flange anywhere in the manual ,does anyone have any 

 figures?, thanks, #573 steve vestuti.


	


Steve,



The torque settings for the Warp Drive propeller are specified in the 

instructions accompanying the propeller.  Since the instructions for 

assembling the propeller are quite detailed, I think you would be wise to 

get Warp Drive to send you a copy if you don't have them.  There are two 

lots of torque settings dependent on which bolts are being used, 1/4" or 

5/16"  Also beware, the two hub halves have mating marks.  To reiterate, I 

think you would be wise to get yourself a copy of the instructions if you 

can't find them.



Regards



Kingsley in Oz

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum