 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Carlos Sa
Joined: 13 Jan 2006
Posts: 96
|
 Posted: Sun Jul 09, 2006 5:50 pm Post subject: Primer / paint question |
 |
|
Hello, all
This is probably going to be obvious for a number of you.
I have applied a first coat of zinc chromate to some parts with a sponge brush.
In some spots, I get an ugly effect when applying the second coat.
It happens almost immediately.
All parts where previously scrubbed with scotch brite (color to remain unidentified), and then
swiped with a clean rag. I always wear gloves while working. Cheaper than H2O2 and band-aids. And
avoids fingerprints.
Any ideas what causes this? I see no apparent pattern...
Carlos
Montreal, Canada
CH601-HD, plans
do not archive
__________________________________________________________
Lèche-vitrine ou lèche-écran ?
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
| Description: |
|
| Filesize: |
253.09 KB |
| Viewed: |
145 Time(s) |
|
| Description: |
|
| Filesize: |
143.44 KB |
| Viewed: |
106 Time(s) |
|
_________________
CH601-HD, plans
Montreal, Canada |
|
| Back to top |
|
 |
gboothe(at)calply.com
Guest
|
| Posted: Sun Jul 09, 2006 6:18 pm Post subject: Primer / paint question |
|
|
Carlos,
You did not say how long the drying time for the first coat was. Is it
re-emulsifying with the second coat?
Somebody out there correct me if I am mistaken, but isn't two coats of zinc
chromate an overkill? It has been my understanding that a thin film is all
that is desired.
Gary Boothe
Cool, CA
601 HDSTD, WW Conversion
Tail done, working on wings....
Hello, all
This is probably going to be obvious for a number of you.
I have applied a first coat of zinc chromate to some parts with a sponge
brush.
In some spots, I get an ugly effect when applying the second coat.
It happens almost immediately.
All parts where previously scrubbed with scotch brite (color to remain
unidentified), and then
swiped with a clean rag. I always wear gloves while working. Cheaper than
H2O2 and band-aids. And
avoids fingerprints.
Any ideas what causes this? I see no apparent pattern...
Carlos
Montreal, Canada
CH601-HD, plans
do not archive
__________________________________________________________
Lèche-vitrine ou lèche-écran ?
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
jean-paul.roy4(at)tlb.sym
Guest
|
| Posted: Mon Jul 10, 2006 4:45 am Post subject: Primer / paint question |
|
|
Sometimes, too much is worst than not enough.
Just my opinion
Jean-Paul
do not archive
---
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
noelloveys(at)yahoo.ca
Guest
|
| Posted: Mon Jul 10, 2006 4:59 am Post subject: Primer / paint question |
|
|
Do you wipe down the parts with a bit of MEK before priming? If you don't
like MEK, who does, then you can try methyl hydrate.
Noel
[quote] --
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
