Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

warp drive torque

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

danny shepherd

Joined: 27 Jan 2006
Posts: 117
Location: north Wales, United Kingdom

Posted: Tue Jul 11, 2006 8:42 am Post subject: warp drive torque

Hi all,

          Someone on the list recently was asking about the torque 

values on the warp drive prop. As I have just received my prop this 

morning here is what they quote.

** note:  After adjusting the blade pitch, tighten the clamping bolts in 

increments of 20 inch pounds up to the full recommended torque.  Do not 

fully tighten the bolts in one step! tightening one bolt to the full 

torque could change the pitch of the blade. Torque the clamping bolts 

evenly in a criss-cross path.



Torque Values.

Torque the 1/4" clamping bolts to 120 inch pounds or 10 foot pounds.

Torque the 5/16" or 8mm bolts to 175 inch pounds or 15 foot pounds.

 

Hope this helps



Danny  G-c.e.r.i  ( engine arriving September I hope )

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum