Matronics Email Lists :: View topic - W-1011 and rear spar holes are not matched

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

W-1011 and rear spar holes are not matched

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

jchang10

Joined: 05 Jul 2006
Posts: 227

Posted: Fri Jul 28, 2006 4:50 pm Post subject: W-1011 and rear spar holes are not matched

This is a bit odd, and I just want to verify that this is okay. I am on

page 15-4, step 1.



When match-drilling the 2 outboard most wing step ribs (W-1011) with the

rear spar (W-1007A) and the rear spar reinforcement fork (W-1007B), the

prepunched holes in the ribs do not line up with the holes in the other

parts.



2 outboard (left) most W-1011 ribs: 

http://www.jline.com/log/aviation/build/wingkit/photos/IMG_4364.html

 

Extra match-drill holes: 

http://www.jline.com/log/aviation/build/wingkit/photos/IMG_4365.html

 

It just seems strange to have these extra holes so close to the new

rivet-holes. However, all of my W-1011's have 4 pre-punched holes.

Everybody has these extra holes, right?



Thanks,

Jae

#40533

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011

jim(at)CombsFive.Com
Guest

Posted: Fri Jul 28, 2006 6:26 pm Post subject: W-1011 and rear spar holes are not matched

Jae,



My rear spar and rib have the same "issue".  Drill the new holes and move on.  



As they say in soccer, Play on!



Jim Combs

N312F 

#40192 - Fuselage



============================================================






This is a bit odd, and I just want to verify that this is okay. I am on

page 15-4, step 1.



When match-drilling the 2 outboard most wing step ribs (W-1011) with the

rear spar (W-1007A) and the rear spar reinforcement fork (W-1007B), the

prepunched holes in the ribs do not line up with the holes in the other

parts.



2 outboard (left) most W-1011 ribs: 

http://www.jline.com/log/aviation/build/wingkit/photos/IMG_4364.html

 

Extra match-drill holes: 

http://www.jline.com/log/aviation/build/wingkit/photos/IMG_4365.html

 

It just seems strange to have these extra holes so close to the new

rivet-holes. However, all of my W-1011's have 4 pre-punched holes.

Everybody has these extra holes, right?



Thanks,

Jae

#40533



 

 

 



============================================================

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

jchang10

Joined: 05 Jul 2006
Posts: 227

Posted: Fri Jul 28, 2006 7:01 pm Post subject: W-1011 and rear spar holes are not matched

Jim... Response is much appreciated!



I am finding the wing plans are not flowing as well for me, for some

reason. I am scratching my head often as to the order of certain steps,

or their lack there of. Thus, I am being extra careful due to my onset

of some form of dyslexia!



Thanks again!

Jae

Do not archive






My rear spar and rib have the same "issue".  Drill the new holes and

move on.  



As they say in soccer, Play on!



Jim Combs

N312F 

#40192 - Fuselage

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011

rene(at)felker.com
Guest

Posted: Fri Jul 28, 2006 7:15 pm Post subject: W-1011 and rear spar holes are not matched

Jae, if you are scratching your head now.......when you get to the fuselage

you will pull your hair out.  My impression is that as you move through the

project more and more is assumed.  I have gotten into the habit of reviewing

Tim's site before I start a section to better understand what is being done

in each section.



Thanks Tim for a great resource



Do not archive.



Rene'

40322

wings, fuselage and finish all at the same time.......

801-721-6080

--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Tim(at)MyRV10.com
Guest

Posted: Sat Jul 29, 2006 4:21 pm Post subject: W-1011 and rear spar holes are not matched

You're very welcome, and you're welcome again too to all of the people

who expressed their thanks at OSH.  I really enjoy helping in the way

that I am most able.   My most interesting thank you of the week came

from Mr. "Flash" Gordon, who's building a -10 in IL.   He's a Chicago

Center controller who's worked OSH a few years and gave me the very

kindly surprise of the gift of one of the pink OSH "Tower" controller

shirts.  It's one of those things that brings a huge smile, and

I'll never forget.  For you all though, don't feel that you owe

me anything....because it's from other builders that I got the

ability to build the -10.  I could not have done it as well without

those who have gone before...especially Randy.



Tim Olson - RV-10 N104CD - Flying

do not archive

Rene wrote:

[quote] 

 

 Jae, if you are scratching your head now.......when you get to the fuselage

 you will pull your hair out.  My impression is that as you move through the

 project more and more is assumed.  I have gotten into the habit of reviewing

 Tim's site before I start a section to better understand what is being done

 in each section.

 

 Thanks Tim for a great resource

 

 Do not archive.

 

 Rene'

 40322

 wings, fuselage and finish all at the same time.......

 801-721-6080

 

 

 --

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum