 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Geoff Heap
Joined: 12 Jan 2006
Posts: 266
Location: Lindenwold, New Jersey
|
 Posted: Mon Jul 31, 2006 12:49 pm Post subject: Where's Ben Hass. Ref boots for 701 steering rods |
 |
|
I'm looking for Ben Haas formerly at Benford2(at)aol.com or anyone who has fitted Yamaha part # 8CR2195e to their steering rods.
I have a question regarding the dimensions of the assy. They may or may not fit a 701. His photo in the archive looks like it may be a 601. Thanks....Geoff
Do not archive
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
 |
tomtafcor(at)triton.net
Guest
|
| Posted: Tue Aug 01, 2006 2:55 am Post subject: Where's Ben Hass. Ref boots for 701 steering rods |
|
|
Geoff: Ben monitors this list, but you can contact him at
n801bh(at)netzero.com The Yamaha boots where on his 801, which I used on my
801 as well. I could also get the dimensions you need.
Tom Faulkner
N801TP
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
n801bh(at)netzero.com
Guest
|
| Posted: Tue Aug 01, 2006 5:01 am Post subject: Where's Ben Hass. Ref boots for 701 steering rods |
|
|
The yamaha boots are on my 801. They will probably fit on the entire Zenith line though
Ben Haas
N801BH
www.haaspowerair.com
-- "Geoff Heap" <stol10(at)COMCAST.NET> wrote:
--> Zenith-List message posted by: "Geoff Heap" <stol10(at)comcast.net>
I'm looking for Ben Haas formerly at Benford2(at)aol.com or anyone who has fitted Yamaha part # 8CR2195e to their steering rods.
I have a question regarding the dimensions of the assy. They may or may not fit a 701. His photo in the archive looks like it may be a 601. Thanks....Geoff
Do not archive
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=51170#51170
======================== - The Zenith-List&nbe many List utilities such as the Subsp; &nb================================================ - NEW MATRONICS LIST&p; &nbs========================= &nb Thank you for your generous sbsp; -Matt Dralle,&n==========================================
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
Geoff Heap
Joined: 12 Jan 2006
Posts: 266
Location: Lindenwold, New Jersey
|
| Posted: Tue Aug 01, 2006 6:54 am Post subject: Re: Where's Ben Hass. Ref boots for 701 steering rods |
|
|
Thanks for replying Ben and Tom. I need the height of the assembly as viewed from the pilot seat. (The length of the aluminum base fitting). The 701 has a Z stiffener on the firewall that I don’t want to mess with. It's structural. I have 8.85” available from the floor up to the inside of the “Z”. See attached pic (size 335 kb). If I can squeeze them in I’d like to fit them. Thanks for your time……Geoff
I'm having a problem attaching my pic but I think you get the idea. The "Z" stiffener runs left to right at the top of the steering slots.
do not archive
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
601zv(at)ritternet.com
Guest
|
| Posted: Tue Aug 01, 2006 1:42 pm Post subject: Where's Ben Hass. Ref boots for 701 steering rods |
|
|
I just received a set of the Yamaha boots for use on my 601XL. The ouside
dimensions of the flange are 164mm high by 105mm wide. Inside the boot,
131mm by 66mm. On my 601XL they will fit OK except that the slots, at 144mm
long, are longer that the vertical boot opening. So, if the maximum
vertical travel of the steering rods in the slots requires the full 144mm
they won't work. Does anyone who has assembled the 601XL nose gear know how
much travel range is actually required? The boots and flanges which are
Yamaha #8CR-2198F-00 and 8CR-2195E-00 I got from StadiumYamaha.com for
$61.23 total shipped for the two sets.
Robin Bellach, Jasper, AR
601XL Zen-Vair, working on fuse
---
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
