Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Dynon EMS D10

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

aspen1150(at)yahoo.com
Guest

Posted: Tue Aug 15, 2006 12:19 pm Post subject: Dynon EMS D10

Jabiru Users,

  Has anyone tried using the Dynon EMS E10 with a Jabiru 3300?

  I've not been able to get the tach to work properly with this engine. It reads about 300 RPM low and gets worse at higher speeds.  I set the multiplier as high as the software will allow me but it still reads too low, any thoughts?

  Thanks Jim     105JT   601XL



  		Stay in the know. Pulse on the new Yahoo.com. [url=http://us.rd.yahoo.com/evt=42974/*http://www.yahoo.com/preview] Check it out.[/url]   [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

admin(at)arachnidrobotics
Guest

Posted: Tue Aug 15, 2006 12:36 pm Post subject: Dynon EMS D10

Dynon may be able to supply you with a software update to correct your problem.  I'm still half-considering going with the Jab and Dynon, so I would be curious to hear the resolution to your problem.

Jim <aspen1150(at)yahoo.com> wrote:[quote] Jabiru Users,

  Has anyone tried using the Dynon EMS E10 with a Jabiru 3300?

  I've not been able to get the tach to work properly with this engine. It reads about 300 RPM low and gets worse at higher speeds.  I set the multiplier as high as the software will allow me but it still reads too low, any thoughts?

  Thanks Jim     105JT   601XL

    

Stay in the know. Pulse on the new Yahoo.com. [url=http://us.rd.yahoo.com/evt=42974/*http://www.yahoo.com/preview] Check it out.[/url] [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

dredmoody(at)cox.net
Guest

Posted: Tue Aug 15, 2006 12:59 pm Post subject: Dynon EMS D10

 	  Quote: 	
		  From what I've read on the Yahoo jabiru engine list, my first guess would be that the pickup (sensor) is set too far from the flywheel. Have you checked to see that the tach pickup is adjusted close enough to the flywheel to not "miss" any revs as the speed increases?


	


Ed Moody II



 	  Quote: 	
		   Jim <aspen1150(at)yahoo.com> wrote: Jabiru Users,

   Has anyone tried using the Dynon EMS E10 with a Jabiru 3300?

   I've not been able to get the tach to work properly with this engine. It reads about 300 RPM low and gets worse at higher speeds.  I set the multiplier as high as the software will allow me but it still reads too low, any thoughts?

   Thanks Jim     105JT   601XL

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

NYTerminat(at)aol.com
Guest

Posted: Tue Aug 15, 2006 1:20 pm Post subject: Dynon EMS D10

Or it may need a resistor across the input so that it doesn't miss those  spikes fro the sensor

  

 Bob Spudis

  

  

  

  

 In a message dated 8/15/2006 5:01:29 P.M. Eastern Daylight Time,  dredmoody(at)cox.net writes:

  	  Quote: 	
		  

 	  Quote: 	
		  From what I've read on the Yahoo jabiru engine list, my first    guess would be that the pickup (sensor) is set too far from the flywheel. Have    you checked to see that the tach pickup is adjusted close enough to the    flywheel to not "miss" any revs as the speed increases?


	


Ed Moody    II



 	  Quote: 	
		   Jim <aspen1150(at)yahoo.com> wrote: Jabiru    Users,

   Has anyone tried using the Dynon EMS E10 with a    Jabiru 3300?

   I've not been able to get the tach to work    properly with this engine. It reads about 300 RPM low and gets worse at higher    speeds.  I set the multiplier as high as the software will allow me but    it still reads too low, any thoughts?

   Thanks Jim        105JT   601XL


	


	


 

  

  [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum