Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Prop Dome

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

cpayne(at)joimail.com
Guest

Posted: Sat Aug 19, 2006 2:56 am Post subject: Prop Dome

I have had some luck with prop "domes" that were not scored or worn too badly by chucking them into a lath and simply cleaning up the sealing surface with emery cloth. Following this with acid etch and alodyne. I suspect that having the dome re-anodized would be a better solution.

  

  

 Craig Payne

 cpayne(at)joimail.com (cpayne(at)joimail.com)

  

  

 

  [quote][b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

cjpilot710(at)aol.com
Guest

Posted: Sat Aug 19, 2006 9:07 am Post subject: Prop Dome

I've done the same.  These domes are not usually scored that badly that they can't be smoothed out with a emery cloth.  Remember the seal is rubber and should take the shape of the cylinder deformities if they do not have to sharp of edges.  Some where I've read there is a limited on the depth of any scoring, but the number escapes me.

    

   Jim "Pappy" Goolsby

    

  

 --

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

dsavarese(at)elmore.rr.co
Guest

Posted: Sun Aug 20, 2006 5:27 pm Post subject: Prop Dome

I'd be interested in seeing the photos.  Send them direct to my email, 

dsavarese(at)elmore.rr.com.  Thank and good work.

Dennis



---

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum