Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Iso Amp

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckollsr(at)cox.net
Guest

Posted: Thu Aug 24, 2006 6:54 pm Post subject: Iso Amp

At 10:03 AM 8/24/2006 -0700, you wrote:



 	  Quote: 	
		  Removed U114, jumpered 2 & 3 together.  Now when I apply power nothing is 

amplified.  That is, in stereo configuration you could hear music without 

power but it was much louder with power.  Now in the "mono" configuration 

with the above changes, no difference can be heard in loudness when power 

is applied.




	


  Are you sure you've wired it right? Which side of the board has

  the connector on it? Note there are two pinout configurations

  depending on how the connector is mounted. See latest instruction

  manual for an amplification of this situation. It was recently

  updated and posted at:



http://www.aeroelectric.com/Catalog/AEC/9009/9009-700H.pdf



   Check out note 14 on Page 2

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum