msherman95632(at)yahoo.co
Guest
|
 Posted: Sat Aug 26, 2006 9:16 pm Post subject: Strobe noise |
 |
|
Mike.
I wired my 701 per Aero Electric layout, with a single
point ground. That is supposed to stop all that
noise, but it didn't. At no point did I use the
airframe as a ground. I still had strobe noise in my
radio. I put a noise filter from Radio Shack in line
with the power for the radio and intercom, that
stopped all the noise.
Check out the aeroelectric list archives.
Mark S.
701/912
Painting
----------------------------------------
Hello fellow builders: I mounted the Aero Flash strobe
units to the inside of the seat backs in my 701
running shielded cable to each strobe light. With the
strobe lights on, I can still faintly hear the strobe
unit through my headset.
I was wondering if anyone else had a similar problem
and if it could be corrected with filters to the power
leads. If so, what type of filters should I buy and
where do I get them?
Thanks in advance, Mike Elrod
__________________________________________________
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
