echristley(at)nc.rr.com
Guest
|
 Posted: Thu Aug 31, 2006 4:43 am Post subject: Dynon D10 AOA Boom |
 |
|
Take a peek at http://www.ch601.org/resources/aoa/aoa.htm
The Dynon AOA function requires calibration, just like this instrument
will need. Ed described how it works. The calibration technique is to
go up and do a few stalls, noting where the gauge is at the stall point.
| Quote: |
>
>
>I have a Dynon D10A. Would be nice to use the AOA feature. Already have a
>pitot/static under wing of my Europa.
>
>I am thinking a probe high up on the rudder may work and not complicate
>rigging the wings or hurting anything when wings go on trailer.
>
>Dynon sells a boom mount AOA/pitot, part number is 100532-000 but it is 1"
>in diameter and has a pitot.
>
>I am thinking something like a thin wall 5/16" or 1/4" tube, with 1" of
>the tip turned up, flattened, and plugged up and a hole drilled.
>
>Has anyone mounted a AOA on rudder?
>
>Know where to buy one?
>
>Made one?
>
>Thx.
>Ron Parigoris
>
>
>
|
--
,|"|"|, Ernest Christley |
----===<{{(oQo)}}>===---- Dyke Delta Builder |
o| d |o http://ernest.isa-geek.org |
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
