Matronics Email Lists :: View topic - SIGHT GLASS for M14 type2 (was Kimball Clean Kit)

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

SIGHT GLASS for M14 type2 (was Kimball Clean Kit)

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

david(at)mcgirt.net
Guest

Posted: Tue Aug 29, 2006 4:38 am Post subject: SIGHT GLASS for M14 type2 (was Kimball Clean Kit)

Here is the picture of what Herb was talking about on Jergis’s SU31  

   

         

  

From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Herb Coussons

 Sent: Monday, August 28, 2006 11:08 PM

 To: yak-list(at)matronics.com

 Subject: Re: Kimball Clean Kit  

  

   

Anyone know where to get the case acess that goes on the right side of the case when facing the engine? We had a discussion about oil in the cylinders and fluid lock at OSH. Yeargis has a glass cover on the case that if I understood correctly allows him to pull the prop through after shutdown - while he can see the position of the crank. When the crank stops in the highest 12 oclock position then no oil siphons down into the case. Does anyone in the US know of this mod? It seems simple and easy to install - 3 bolts unless you have a Yak 52TW with electric starter - then this cover is used to mount the starter. It also solves the problem of starting with no oil. I have never heard of it or seen it discussed, yet there it was on Yeargis' Sukhoi and Sergei knew of it too. Any Euro's on the list know of it?    

   

    

Herb       

On Aug 28, 2006, at 4:46 PM, Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E wrote:  

  



 

     

Kevin, you are absolutely correct and I agree with every word you have said. I believe in your system(s), and plan on purchasing them, or at least some of them, myself.   

    

That said, I am sure that if every M-14 equipped aircraft had the shut off valve, sooner or later some yahoo would manage to start one with the valve off. Right now, the ones equipped with the valve are a very small minority.   

    

If after this discourse, anyone has any doubt at all, let me make one thing perfectly clear: I believe that Kevin Kimball and his associates produce some of the finest parts and come up with some of the best ideas (relating to just about anything and everything) that I have ever come across. I recommend his aircraft, his products and his accessories without doubt or question. If this sounds like a commercial.... sorry, but I believe when someone deserves praise, they ought to get it, just as when someone is a crook, the world needs to know THAT... no punches pulled. I am a strong advocate and supporter of every single thing Kevin's company stands for, has made, or has on the drawing board. We're lucky to have someone like him around.   

    

Mark Bitterlich  

    

N50YK  

  [quote]  

--

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

IMGP4193_(Large).JPG

Description:

Filesize:

79.33 KB

Viewed:

262 Time(s)

rkent(at)wlacrussianeng.c
Guest

Posted: Tue Aug 29, 2006 5:37 am Post subject: SIGHT GLASS for M14 type2 (was Kimball Clean Kit)

Herb,

  

 The part pictured is from kit similar to Kimballs  clean. The kit was made by Sergio Dallan. I've got a couple here, I'll try to  dig out some pics and info and post it to the list.

  

 Regards

  

 Rob Kent

Stores Manager

WLAC - Russian  Engineering

www.wlacrussianeng.co.uk

  

 Tel: +44 1628 829 165

Mob: +44 7866 438  293

Fax: +44 1628 828 961

  

 [quote]   ---

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

david(at)mcgirt.net
Guest

Posted: Sun Sep 10, 2006 2:50 pm Post subject: SIGHT GLASS for M14 type2 (was Kimball Clean Kit)

Rob,   

   

 I would like to get one of these site glasses, do you have them?  

   

David  

   

   

         

  

From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Rob Kent

 Sent: Tuesday, August 29, 2006 9:35 AM

 To: yak-list(at)matronics.com

 Subject: Re: SIGHT GLASS for M14 type2 (was Kimball Clean Kit)  

  

     

Herb,  

    

   

    

The part pictured is from kit similar to Kimballs clean. The kit was made by Sergio Dallan. I've got a couple here, I'll try to dig out some pics and info and post it to the list.  

    

   

    

Regards  

    

   

    

Rob Kent

 Stores Manager

 WLAC - Russian Engineering

 www.wlacrussianeng.co.uk  

    

   

    

Tel: +44 1628 829 165

 Mob: +44 7866 438 293

 Fax: +44 1628 828 961  

    

   

  [quote]    

---

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum