Geoff Heap
Joined: 12 Jan 2006
Posts: 266
Location: Lindenwold, New Jersey
|
 Posted: Mon Sep 25, 2006 12:46 pm Post subject: 701 header tank air vent |
 |
|
Hi Guys.
How do I terminate the vent line that comes up from the header tank. Does it get tied off at a high point inside the wing? Plug it into a high point in the wing tank wall? Exit the front of the wing to get "ram air???? I'm going to call ZAC later but I want to check what the guys on the list did. I know that Johann and Jari at least have this configuration.
On another note. My Dual sticks are coming along nicely and I am past the prototype stage. Finished parts are in place and full movement of the sticks transfers through the proper linkages. I've still got some adjustments to make but the configuration seems to be fine. It's the same as the old 601 config that I've seen. Everything is mounted on the seat front and all movements transfer through the seat front. Nothing protrudes above the top of the seat. There are no changes to the original center stick setup parts. I use them as supplied. That means that it can be converted back easily. I'm happily married and want to keep it that way so I only work on the weekends, so it's going kinda slow. I'll post pics when I'm done.......Geoff
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
