Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

AeroElectric-RE trio auto trim wiring ????

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
fstringham



Joined: 10 Jan 2006
Posts: 87

PostPosted: Thu Oct 26, 2006 5:27 pm    Post subject: AeroElectric-RE trio auto trim wiring ???? Reply with quote

Bob and others

I need your help in following / understanding the attached diagram.
According to the folks at trio the 5 and 6 leads from the trio servo are
wired to the commons of the dpdt relay. The purpose of this set up is to
disconnect the auto trim when the manual trim is actuated. Now the
questions: (If the relay I am using has 1 and 2 as NC, 3 and 4 NO, 5 and 6
as the commons, and 7 and 8 the coils). What is the purpose of the bridge
rectifier? When the relay is in the NC position is the manual trim over ride
on or is the trio auto trim on? What wiring diagram would represent this set
up better than the attached diagram? HELP.......LOST in a wiring maze again.
I know......I know sweet just to all my poor chemistry student that I
couln't see why they copuldn't understand quantum mechanics!

TIA

Frank (at) sgu and slc

_________________________________________________________________
Get FREE company branded e-mail accounts and business Web site from
Microsoft Office Live
http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



Trio_auto_trim_wiring.doc
 Description:

Download
 Filename:  Trio_auto_trim_wiring.doc
 Filesize:  111.5 KB
 Downloaded:  199 Time(s)

Back to top
View user's profile Send private message
sportav8r(at)gmail.com
Guest





PostPosted: Thu Oct 26, 2006 7:18 pm    Post subject: AeroElectric-RE trio auto trim wiring ???? Reply with quote

Interesting; I've never seen a relay with a polarity preference for
the K-coil, but this circuit seems designed to feed electrons into
only one end of the coil regardless of manual trim voltage polarity to
the motor. I thought magnets was magnets Smile

Bob, what's up here?

-Bill B / Trio user, not yet with auto-trim

On 10/26/06, Frank Stringham <fstringham(at)hotmail.com> wrote:
Quote:
Bob and others

I need your help in following / understanding the attached diagram.
According to the folks at trio the 5 and 6 leads from the trio servo are
wired to the commons of the dpdt relay. The purpose of this set up is to
disconnect the auto trim when the manual trim is actuated. Now the
questions: (If the relay I am using has 1 and 2 as NC, 3 and 4 NO, 5 and 6
as the commons, and 7 and 8 the coils). What is the purpose of the bridge
rectifier? When the relay is in the NC position is the manual trim over ride
on or is the trio auto trim on? What wiring diagram would represent this set
up better than the attached diagram? HELP.......LOST in a wiring maze again.
I know......I know sweet just to all my poor chemistry student that I
couln't see why they copuldn't understand quantum mechanics!

TIA

Frank (at) sgu and slc

_________________________________________________________________
Get FREE company branded e-mail accounts and business Web site from
Microsoft Office Live
http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/



- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
craig(at)craigandjean.com
Guest





PostPosted: Thu Oct 26, 2006 8:40 pm    Post subject: AeroElectric-RE trio auto trim wiring ???? Reply with quote

Well, the design does supply suppression diodes across the coil no matter
what the input polarity. Not certain that was Trio's intention.

-- Craig


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group