 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
N6ZY
Joined: 08 Aug 2011
Posts: 31
|
 Posted: Wed Dec 03, 2014 11:08 am Post subject: Woodcomp Prop & Controller |
 |
|
I am looking for advice on fitting a Woodcomp 2 blade prop to my trigear.
I want to fit the 1700mm prop, which requires me to slightly increase the ground clearance. I am thinking of doing this by inserting a 1/4" shim under the fixing bolts for the nose gear horizontal pivot block where it attaches to the fuselage bulkhead. Has anyone done this (or any alternative method), and if so, do you have any advice?
Secondly, does anyone have one of Mark Burton's CSC-1 prop controllers spare that they are interested in selling? Unfortunately he does not make them any more, and I understand that the Woodcomp controllers have a poor reputation. Alternatively has anyone used the Airmaster controller with a Woodcomp prop to confirm whether they are compatible? Thanks.
Jerry Fisher
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
Roland
Joined: 30 Nov 2009
Posts: 334
Location: EDLE
|
| Posted: Thu Dec 04, 2014 1:44 am Post subject: Re: Woodcomp Prop & Controller |
|
|
Hi Jerry,
Frans Feldmann in the Netherlands has fitted a big two blade Woodcomp and therefore modified his nose leg on PH-DIY to achieve some centimeters more ground-clearance.
If he doesn't answer here, you can try to get in contact with him by e-mail: frans(at)privatepilots.nl
Good luck!
Roland
PH-ZTI
XS Trigear 914
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
John Wighton
Joined: 18 May 2010
Posts: 240
|
| Posted: Fri Dec 05, 2014 1:15 am Post subject: Re: Woodcomp Prop & Controller |
|
|
Jerry,
I guess you are under EAA rules but be aware that any modification to the U/C would require significant amounts of work to comply with the UK (LAA rules). Typically this would involve analysis and testing. Both the leg and the mounting structure are affected.
I designed a new main landing gear for the CFM Shadow/Streak some years ago, this changed the aircraft static ground attitude enough to warrant a series of flight trials as well.
The EAA system means you avoid of lot of these issues, however, you do still need to check that you have adequate margins.
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
_________________
John Wighton
Europa XS trigear G-IPOD |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
