 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26320
Location: Livermore CA USA
|
 Posted: Thu Jan 22, 2015 6:12 pm Post subject: Lasercut Labels For Panel & Interior (With Pics) |
 |
|
I spent a day or so on the CAD laying out all the new panel and interior labels for the RV-8 and also the RV-6 while I was at it. Lot's of precision pays off here. I emailed PDF files of the labels to Ms Carita in Livermore, a label making company, and ordered up some labels. I marked in red where I wanted them cut out.
Today, I picked them up and they are pretty amazing! All I have to do is peal them off the backing and apply! They are similar to what I had on the RV-8 v1.0, but it seems that they did a better job than the first company.
Nothing makes an interior more professional than professional looking labels, IMHO. These cost me $25/sheet. Well worth it!!
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 200+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
Matt's Livermore Airport Live ATC Stream!
Check out the live ATC stream directly from my hangar at the Livermore
Airport. Includes both Tower and Ground transmissions. Archives too!
For entertainment purposes only. http://klvk.matronics.com
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
| Description: |
|
| Filesize: |
192.54 KB |
| Viewed: |
3872 Time(s) |
|
| Description: |
|
| Filesize: |
116.09 KB |
| Viewed: |
3872 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
 |
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26320
Location: Livermore CA USA
|
| Posted: Thu Jan 22, 2015 6:12 pm Post subject: Lasercut Labels For Panel & Interior (With Pics) |
|
|
I spent a day or so on the CAD laying out all the new panel and interior labels for the RV-8 and also the RV-6 while I was at it. Lot's of precision pays off here. I emailed PDF files of the labels to Ms Carita in Livermore, a label making company, and ordered up some labels. I marked in red where I wanted them cut out.
Today, I picked them up and they are pretty amazing! All I have to do is peal them off the backing and apply! They are similar to what I had on the RV-8 v1.0, but it seems that they did a better job than the first company.
Nothing makes an interior more professional than professional looking labels, IMHO. These cost me $25/sheet. Well worth it!!
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 200+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
Matt's Livermore Airport Live ATC Stream!
Check out the live ATC stream directly from my hangar at the Livermore
Airport. Includes both Tower and Ground transmissions. Archives too!
For entertainment purposes only. http://klvk.matronics.com
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
| Description: |
|
| Filesize: |
192.54 KB |
| Viewed: |
3872 Time(s) |
|
| Description: |
|
| Filesize: |
116.09 KB |
| Viewed: |
3872 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26320
Location: Livermore CA USA
|
| Posted: Thu Jan 22, 2015 6:12 pm Post subject: Lasercut Labels For Panel & Interior (With Pics) |
|
|
I spent a day or so on the CAD laying out all the new panel and interior labels for the RV-8 and also the RV-6 while I was at it. Lot's of precision pays off here. I emailed PDF files of the labels to Ms Carita in Livermore, a label making company, and ordered up some labels. I marked in red where I wanted them cut out.
Today, I picked them up and they are pretty amazing! All I have to do is peal them off the backing and apply! They are similar to what I had on the RV-8 v1.0, but it seems that they did a better job than the first company.
Nothing makes an interior more professional than professional looking labels, IMHO. These cost me $25/sheet. Well worth it!!
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 200+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
Matt's Livermore Airport Live ATC Stream!
Check out the live ATC stream directly from my hangar at the Livermore
Airport. Includes both Tower and Ground transmissions. Archives too!
For entertainment purposes only. http://klvk.matronics.com
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
| Description: |
|
| Filesize: |
192.54 KB |
| Viewed: |
3872 Time(s) |
|
| Description: |
|
| Filesize: |
116.09 KB |
| Viewed: |
3872 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
n146wb(at)cfu.net
Guest
|
| Posted: Fri Jan 23, 2015 5:23 am Post subject: Lasercut Labels For Panel & Interior (With Pics) |
|
|
I had stick-on vinyl labels made for my -6. They are the same material that
they use for "wraps" on vehicles. They look good and weigh next to nothing
however they cost more than the laser cut labels.
Warren
--
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
