rowlandcarson(at)gmail.co
Guest
|
 Posted: Thu Apr 16, 2015 2:07 pm Post subject: OR5 slot query |
 |
|
OK, so I’ve spent the day fiddling with the flap pushrod adjusting its length and the angle of the actuator plate FL21, and adding a small stop on one side as advised by Bud Yerly, and have finished on the happy note that the outriggers are now staying up much better when the flaps are retracted and that both flaps are travelling 26.7 degrees from retracted positions that match the wing root template well.
However, the bolt that slides in OR5 is still not behaving as the manual would like. Starboard side, the bolt is about half-way along the slot in OR5 when the flaps are down, but port side the bolt has barely moved from the forward end of the slot with the flaps fully down.
The retracted positions of the flaps appear to be the same; they have the same travel. What can I do to make the bolt move further along the slot in the port OR5?
in friendship
Rowland
| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson(at)gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson
| pictures: http://picasaweb.google.com/rowlandcarson
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
