 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
cffd66(at)yahoo.com
Guest
|
 Posted: Fri May 08, 2015 5:51 am Post subject: Zenith701801-List Digest: 3 Msgs - 05/07/15 |
 |
|
I added .016 L's I made with a small brake to the sides. I should have added one on the bottom just behind the large inspection hole.
Chuck D.
M701TX
From: Zenith701801-List Digest Server <zenith701801-list(at)matronics.com>
To: Zenith701801-List Digest List <zenith701801-list-digest(at)matronics.com>
Sent: Friday, May 8, 2015 2:02 AM
Subject: Zenith701801-List Digest: 3 Msgs - 05/07/15
*
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Zenith701801-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith701801-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2015-05-07&Archive=Zenith701801
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2015-05-07&Archive=Zenith701801
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Zenith701801-List Digest Archive
---
Total Messages Posted Thu 05/07/15: 3
----------------------------------------------------------
Today's Message Index:
----------------------
1. 09:29 AM - Diagonal Stiffeners for Fuselage (Perry Delano)
2. 03:08 PM - Re: Diagonal Stiffeners for Fuselage (Doug MacDonald)
3. 04:00 PM - Re: Diagonal Stiffeners for Fuselage (Perry Delano)
________________________________ Message 1 _____________________________________
Time: 09:29:54 AM PST US
From: "Perry Delano" <pdelano(at)telus.net (pdelano(at)telus.net)>
Subject: Diagonal Stiffeners for Fuselage
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from
Zenith. I think I would like to add the diagonal "L" angle stiffening pieces
to the fuselage bottom, top and sides as some builders have done.
Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
________________________________ Message 2 _____________________________________
Time: 03:08:34 PM PST US
Subject: Re: Diagonal Stiffeners for Fuselage
From: Doug MacDonald <dougsnash(at)yahoo.com (dougsnash(at)yahoo.com)>
Perry, I have diagonal stiffeners in my 701 and they help but I still get so
me rattle in certain fligh conditions. It is telling that the diagonals are
stock on the 750 so if I were building a 701 again I would not hesitate to p
ut them in. As for how many to order, I don't remember but essentially one f
or every bay. I would seriously consider adding a second diagonal for a "X"
in the large flat side panels immediately behind the baggage wall as I thin
k one diagonal still leaves too much unsupported 016 drum skin and is likely
the source of the slight rattle I have left when flying uncoordinated.
Hope this information helps
Doug M
Sent from my iPad
| Quote: | On May 7, 2015, at 11:29, Perry Delano <pdelano(at)telus.net (pdelano(at)telus.net)> wrote:
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from Zeni
th. I think I would like to add the diagonal =9CL=9D angle stiff
|
ening pieces to the fuselage bottom, top and sides as some builders have don
e.
| Quote: | Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
|
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
________________________________ Message 3 _____________________________________
Time: 04:00:40 PM PST US
From: "Perry Delano" <pdelano(at)telus.net (pdelano(at)telus.net)>
Subject: RE: Zenith701801-List: Diagonal Stiffeners for Fuselage
HI Doug,
Thanks. I asked Zenith to add them to my order. Won=99t say who,
but someone estimated 11 lengths were required, and I have a couple
extra lying around. I will definetly go for the =9CX=9D.
Regards,
Perry
From: owner-zenith701801-list-server(at)matronics.com (owner-zenith701801-list-server(at)matronics.com)
[mailto:owner-zenith701801-list-server(at)matronics.com (owner-zenith701801-list-server(at)matronics.com)] On Behalf Of Doug
MacDonald
Sent: Thursday, May 07, 2015 3:06 PM
Subject: Re: Diagonal Stiffeners for Fuselage
Perry, I have diagonal stiffeners in my 701 and they help but I still
get some rattle in certain fligh conditions. It is telling that the
diagonals are stock on the 750 so if I were building a 701 again I would
not hesitate to put them in. As for how many to order, I don't remember
but essentially one for every bay. I would seriously consider adding a
second diagonal for a "X" in the large flat side panels immediately
behind the baggage wall as I think one diagonal still leaves too much
unsupported 016 drum skin and is likely the source of the slight rattle
I have left when flying uncoordinated.
Hope this information helps
Doug M
Sent from my iPad
On May 7, 2015, at 11:29, Perry Delano <pdelano(at)telus.net (pdelano(at)telus.net)> wrote:
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from
Zenith. I think I would like to add the diagonal =9CL=9D
angle stiffening pieces to the fuselage bottom, top and sides as some
builders have done.
Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
h701801-List"">http://www.matronics.com/Navigator?Zenith701801-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3Dronics.com/Navigator?Zenith701801-List" target="_blank">http://www.matronbsp; -Matt Dralle, List Admin.
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
 |
pdelano(at)telus.net
Guest
|
| Posted: Fri May 08, 2015 6:57 am Post subject: Zenith701801-List Digest: 3 Msgs - 05/07/15 |
|
|
Thanks Chuck.
I will X it up. and thanks for the heads up on making your own L brackets. I have enough scrap 016 to make my own to supplement those ordered with the fuselage.
Regards,
Perry
From: owner-zenith701801-list-server(at)matronics.com [mailto:owner-zenith701801-list-server(at)matronics.com] On Behalf Of Charles Deiterich
Sent: Friday, May 08, 2015 6:51 AM
To: zenith701801-list(at)matronics.com
Subject: Re: Zenith701801-List Digest: 3 Msgs - 05/07/15
I added .016 L's I made with a small brake to the sides. I should have added one on the bottom just behind the large inspection hole.
Chuck D.
M701TX
From: Zenith701801-List Digest Server <zenith701801-list(at)matronics.com (zenith701801-list(at)matronics.com)>
To: Zenith701801-List Digest List <zenith701801-list-digest(at)matronics.com (zenith701801-list-digest(at)matronics.com)>
Sent: Friday, May 8, 2015 2:02 AM
Subject: Zenith701801-List Digest: 3 Msgs - 05/07/15
*
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Zenith701801-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith701801-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2015-05-07&Archive=Zenith701801
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2015-05-07&Archive=Zenith701801
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Zenith701801-List Digest Archive
---
Total Messages Posted Thu 05/07/15: 3
----------------------------------------------------------
Today's Message Index:
----------------------
1. 09:29 AM - Diagonal Stiffeners for Fuselage (Perry Delano)
2. 03:08 PM - Re: Diagonal Stiffeners for Fuselage (Doug MacDonald)
3. 04:00 PM - Re: Diagonal Stiffeners for Fuselage (Perry Delano)
________________________________ Message 1 _____________________________________
Time: 09:29:54 AM PST US
From: "Perry Delano" <pdelano(at)telus.net (pdelano(at)telus.net)>
Subject: Diagonal Stiffeners for Fuselage
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from
Zenith. I think I would like to add the diagonal "L" angle stiffening pieces
to the fuselage bottom, top and sides as some builders have done.
Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
________________________________ Message 2 _____________________________________
Time: 03:08:34 PM PST US
Subject: Re: Diagonal Stiffeners for Fuselage
From: Doug MacDonald <dougsnash(at)yahoo.com (dougsnash(at)yahoo.com)>
Perry, I have diagonal stiffeners in my 701 and they help but I still get so
me rattle in certain fligh conditions. It is telling that the diagonals are
stock on the 750 so if I were building a 701 again I would not hesitate to p
ut them in. As for how many to order, I don't remember but essentially one f
or every bay. I would seriously consider adding a second diagonal for a "X"
in the large flat side panels immediately behind the baggage wall as I thin
k one diagonal still leaves too much unsupported 016 drum skin and is likely
the source of the slight rattle I have left when flying uncoordinated.
Hope this information helps
Doug M
Sent from my iPad
| Quote: | On May 7, 2015, at 11:29, Perry Delano <pdelano(at)telus.net (pdelano(at)telus.net)> wrote:
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from Zeni
th. I think I would like to add the diagonal =9CL=9D angle stiff
|
ening pieces to the fuselage bottom, top and sides as some builders have don
e.
| Quote: | Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
|
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
________________________________ Message 3 _____________________________________
Time: 04:00:40 PM PST US
From: "Perry Delano" <pdelano(at)telus.net (pdelano(at)telus.net)>
Subject: RE: Diagonal Stiffeners for Fuselage
HI Doug,
Thanks. I asked Zenith to add them to my order. Won=99t say who,
but someone estimated 11 lengths were required, and I have a couple
extra lying around. I will definetly go for the =9CX=9D.
Regards,
Perry
From: owner-zenith701801-list-server(at)matronics.com (owner-zenith701801-list-server(at)matronics.com)
[mailto:owner-zenith701801-list-server(at)matronics.com (owner-zenith701801-list-server(at)matronics.com)] On Behalf Of Doug
MacDonald
Sent: Thursday, May 07, 2015 3:06 PM
Subject: Re: Diagonal Stiffeners for Fuselage
Perry, I have diagonal stiffeners in my 701 and they help but I still
get some rattle in certain fligh conditions. It is telling that the
diagonals are stock on the 750 so if I were building a 701 again I would
not hesitate to put them in. As for how many to order, I don't remember
but essentially one for every bay. I would seriously consider adding a
second diagonal for a "X" in the large flat side panels immediately
behind the baggage wall as I think one diagonal still leaves too much
unsupported 016 drum skin and is likely the source of the slight rattle
I have left when flying uncoordinated.
Hope this information helps
Doug M
Sent from my iPad
On May 7, 2015, at 11:29, Perry Delano <pdelano(at)telus.net (pdelano(at)telus.net)> wrote:
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from
Zenith. I think I would like to add the diagonal =9CL=9D
angle stiffening pieces to the fuselage bottom, top and sides as some
builders have done.
Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
h701801-List"">http://www.matronics.com/Navigator?Zenith701801-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3Dronics.com/Navigator?Zenith701801-List" target="_blank">http://www.matronbsp; -Matt Dralle, List Admin.
| Quote: | | http://www.matronics.com/Navigator?Zenith701801-List |
01234567
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
