delaunj53(at)gmail.com
Guest
|
 Posted: Sat May 16, 2015 1:31 pm Post subject: Kolb-List Digest: 8 Msgs - 05/15/15 |
 |
|
I am trying to reschedule to attend but will probably be late.
On May 16, 2015, at 2:03 AM, Kolb-List Digest Server <kolb-list(at)matronics.com> wrote:
*
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete Kolb-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Kolb-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 15-05-15&Archive=Kolb
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 15-05-15&Archive=Kolb
================================================
EMail Version of Today's List Digest Archive
================================================
----------------------------------------------------------
Kolb-List Digest Archive
---
Total Messages Posted Fri 05/15/15: 8
----------------------------------------------------------
Today's Message Index:
----------------------
1. 08:58 AM - Re: Horizontal stab position (Frankd)
2. 10:00 AM - Re: Firefly quick build and Danny Day (Malcolm Brubaker)
3. 10:05 AM - Re: Firefly quick build and Danny Day (Malcolm Brubaker)
4. 10:51 AM - Re: Horizontal stab position (Rex Rodebush)
5. 12:30 PM - Re: Firefly quick build and Danny Day (Herb)
6. 01:28 PM - Re: Firefly quick build and Danny Day (Malcolm Brubaker)
7. 08:30 PM - firefly cables (chris davis)
8. 10:49 PM - Re: Re: Horizontal stab position (Tony Malins)
________________________________ Message 1 _____________________________________
Time: 08:58:25 AM PST US
Subject: Re: Horizontal stab position
From: "Frankd" <FDucker(at)aol.com>
Hi Tony,
Before you change anything, how did the plane fly? I had an issue like this on
my MkIII Xtra that made the aircraft unsafe to fly, but if the flight went
well on your aircraft maybe there are no changes to be made.
Now, like John H mentioned, if the aircraft needed full up trim then maybe the
Horz Stab angle is set incorrectly. But all these planes are a little different
to each other and I would review the flight handling first before making
any change. Also, make small changes using washers, etc, if you can, until you
get it dialed in.
Safe flying.
FrankD
N1014S, MkIIIXtra.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=442132#442132
________________________________ Message 2 _____________________________________
Time: 10:00:58 AM PST US
From: Malcolm Brubaker <brubakermal(at)yahoo.com>
Subject: Re: Firefly quick build and Danny Day
if you give me the diameter of the tail spring =C2-I may have a pice of 7
0_75 alum also Malcolm & Jeanne Brubaker
Michigan Sport Pilot Repair http://michigansportpilotrepair.comLSRM-A, PPC,
WS
Great Sails - Sailmaker
for Ultralight & Light Sport
(989)513-3022=C2-=C2-=C2-=C2-
From: Herb <Herbgh(at)nctc.com>
To: kolb-list(at)matronics.com
Sent: Thursday, May 14, 2015 7:50 PM
Subject: Firefly quick build and Danny Day
Trying to locate Danny Day...mentioned in an UL news article a few weeks
back... Engine rebuilder in Phoenix Arizona...I have two engines which
have had the Rotax label removed and his name and probably a serial
number engraved on a copper plate installed in its place... I need to
know the history of these engines.. for I bought them and a Kolb Firefly
quick build and a Trike from an estate in LA County California...I
suspect that they are fresh rebuilds or low time engines...but cannot be
sure...one is a 447 that looks new...the other is a nice running 503...
I plan to sell the trike and and the 503 and finish the Firefly...and
keep the 447 for it...
=C2- Thus far , I am missing motor mounts, rudder and elevator cables.
tail wheel rod, seat webbing,right axle.=C2- Likely in a box that went to
the L.A. county landfill!  =C2- Herb
S -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
________________________________ Message 3 _____________________________________
Time: 10:05:32 AM PST US
From: Malcolm Brubaker <brubakermal(at)yahoo.com>
Subject: Re: Firefly quick build and Danny Day
Herb I have a set of new =C2-firefly axils ,a folding wing holder, the pa
rt that sits on the boom tube and can sew a seat for you. I also have a win
d screen =C2-call or email off list for moor info=C2-=C2- the Danny D
ay thing is a mystery to me! Malcolm & Jeanne Brubaker
Michigan Sport Pilot Repair http://michigansportpilotrepair.comLSRM-A, PPC,
WS
Great Sails - Sailmaker
for Ultralight & Light Sport
(989)513-3022=C2-=C2-=C2-=C2-
From: Herb <Herbgh(at)nctc.com>
To: kolb-list(at)matronics.com
Sent: Thursday, May 14, 2015 7:50 PM
Subject: Firefly quick build and Danny Day
Trying to locate Danny Day...mentioned in an UL news article a few weeks
back... Engine rebuilder in Phoenix Arizona...I have two engines which
have had the Rotax label removed and his name and probably a serial
number engraved on a copper plate installed in its place... I need to
know the history of these engines.. for I bought them and a Kolb Firefly
quick build and a Trike from an estate in LA County California...I
suspect that they are fresh rebuilds or low time engines...but cannot be
sure...one is a 447 that looks new...the other is a nice running 503...
I plan to sell the trike and and the 503 and finish the Firefly...and
keep the 447 for it...
=C2- Thus far , I am missing motor mounts, rudder and elevator cables.
tail wheel rod, seat webbing,right axle.=C2- Likely in a box that went to
the L.A. county landfill! =C2- Herb
S -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
________________________________ Message 4 _____________________________________
Time: 10:51:55 AM PST US
Subject: Re: Horizontal stab position
From: "Rex Rodebush" <jrrodebush(at)gmail.com>
The L.E. position of the horiz. stab. has been changed several times since the
Xtra came out. I set mine per instructions from Brian at TNK and it has worked
great. I think it was given in degrees using the motor mounts as a base. He
also gave me the wing angle based on the same. I used a digital level. Call
Travis or Brian for information.
Rex (will have my 40 hours flown off by this summer)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=442140#442140
________________________________ Message 5 _____________________________________
Time: 12:30:14 PM PST US
From: Herb <Herbgh(at)nctc.com>
Subject: Re: Firefly quick build and Danny Day
Quite a few small parts missing...and I was promised a box of parts from
California that were left behind...gonna wait on that ...... plus I
will be at the Kolb factory next week...so will save shipping...Herb
| Quote: | On 05/15/2015 07:59 AM, Malcolm Brubaker wrote:
if you give me the diameter of the tail spring I may have a pice of
70_75 alum also
Malcolm & Jeanne Brubaker
Michigan Sport Pilot Repair
*http://michigansportpilotrepair.com*
<http://michigansportpilotrepair.com/>
LSRM-A, PPC, WS
Great Sails - Sailmaker
for Ultralight & Light Sport
(989)513-3022
------------------------------------------------------------------------
*From:* Herb <Herbgh(at)nctc.com>
*To:* kolb-list(at)matronics.com
*Sent:* Thursday, May 14, 2015 7:50 PM
*Subject:* Firefly quick build and Danny Day
<mailto:Herbgh(at)nctc.com>>
Trying to locate Danny Day...mentioned in an UL news article a few weeks
back... Engine rebuilder in Phoenix Arizona...I have two engines which
have had the Rotax label removed and his name and probably a serial
number engraved on a copper plate installed in its place... I need to
know the history of these engines.. for I bought them and a Kolb Firefly
quick build and a Trike from an estate in LA County California...I
suspect that they are fresh rebuilds or low time engines...but cannot be
sure...one is a 447 that looks new...the other is a nice running 503...
I plan to sell the trike and and the 503 and finish the Firefly...and
keep the 447 for it...
Thus far , I am missing motor mounts, rudder and elevator cables.
tail wheel rod, seat webbing,right axle. Likely in a box that went to
the L.A. county lb-List"
target="_blank">http://www.matronics.com/Navigator?Kolb-Lista
href="http://forums.matronics.com/" target="_blank">http://forums.mat
&nbs//www.matronics.com/contribution"
target="_blank">http://www.matronics.co=================
*
*
|
________________________________ Message 6 _____________________________________
Time: 01:28:31 PM PST US
From: Malcolm Brubaker <brubakermal(at)yahoo.com>
Subject: Re: Firefly quick build and Danny Day
thes parts I have are new 10 years old =C2-never installed=C2-=C2- I
got them from an estate sail in Michigan ill sell them cheep=C2- so let m
e know Malcolm & Jeanne Brubaker
Michigan Sport Pilot Repair http://michigansportpilotrepair.comLSRM-A, PPC,
WS
Great Sails - Sailmaker
for Ultralight & Light Sport
(989)513-3022=C2-=C2-=C2-=C2-
From: Herb <Herbgh(at)nctc.com>
To: kolb-list(at)matronics.com
Sent: Friday, May 15, 2015 3:29 PM
Subject: Re: Firefly quick build and Danny Day
Quite a few small parts missing...and I was promised a box of parts from
California that were left behind...gonna wait on that ...... plus=C2- I w
ill be at the Kolb factory next week...so will save shipping...Herb=C2-
On 05/15/2015 07:59 AM, Malcolm Brubaker wrote:
if you give me the diameter of the tail spring =C2-I may have a pice o
f 70_75 alum also Malcolm & Jeanne Brubaker
Michigan Sport Pilot Repair http://michigansportpilotrepair.com LSRM-A, P
PC, WS
Great Sails - Sailmaker
for Ultralight & Light Sport
(989)513-3022 =C2- =C2- =C2- =C2-
From: Herb <Herbgh(at)nctc.com>
To: kolb-list(at)matronics.com
Sent: Thursday, May 14, 2015 7:50 PM
Subject: Firefly quick build and Danny Day
Trying to locate Danny Day...mentioned in an UL news article a few weeks
back... Engine rebuilder in Phoenix Arizona...I have two engines which
have had the Rotax label removed and his name and probably a serial
number engraved on a copper plate installed in its place... I need to
know the history of these engines.. for I bought them and a Kolb Firefly
quick build and a Trike from an estate in LA County California...I
suspect that they are fresh rebuilds or low time engines...but cannot be
sure...one is a 447 that looks new...the other is a nice running 503...
I plan to sell the trike and and the 503 and finish the Firefly...and
keep the 447 for it...
=C2- Thus far , I am missing motor mounts, rudder and elevator cables.
tail wheel rod, seat webbing,right axle.=C2- Likely in a box that went t
o
the L.A. county lb-List" target="_blank">http://www.matronics.com/Naviga
tor?Kolb-Lista href="http://forums.matronics.com/" target="_blank">http
://forums.mat =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2
- =C2- &nbs//www.matronics.com/contribution" target="_blank">http://w
ww.matronics.co=================
________________________________ Message 7 _____________________________________
Time: 08:30:42 PM PST US
From: chris davis <capedavis(at)yahoo.com>
Subject: firefly cables
=0AHi KOLBERS as you may know i am building a handicap Kolb Firefly . it id
the second Kolb Ivhave buit my firstwas a Fiestar fat and fast .I have a r
equest does anybodyvhave a picture of thier Firefly cables after they leave
the stick and rudder pedals they go overfour pulleys then under four pulle
ys then into the fusalage tube .My prblem is thwt ill-=0A=0A=0A-cant fi
nd a plan or an explanaton -of how the first four are rigged TRAVIS has s
ent me plans and a new construction kanual as I.had to move my roject from
Fl. To Ma. And somehow it disapeared Travis said they use washrs to pace th
em but the angle seems wrongvthe cables -don travel strait over the pulle
y when you run them throughvth next set so a PIC or two would help a lot TR
AVIS Said tha BRIAN -changed the design since the plans were drawn?=0A=0A
Thankq you CHRIS DAVIS=0A=0ASent from Yahoo Mail on Androidk=0A=0A
________________________________ Message 8 _____________________________________
Time: 10:49:26 PM PST US
Subject: Re: Re: Horizontal stab position
From: Tony Malins <malins888(at)gmail.com>
Thanks for the info Rex. Will do that.
Cheers
Tony
| Quote: | On 16/05/2015 12:54 AM, "Rex Rodebush" <jrrodebush(at)gmail.com> wrote:
The L.E. position of the horiz. stab. has been changed several times since
the Xtra came out. I set mine per instructions from Brian at TNK and it
has worked great. I think it was given in degrees using the motor mounts
as a base. He also gave me the wing angle based on the same. I used a
digital level. Call Travis or Brian for information.
Rex (will have my 40 hours flown off by this summer)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=442140#442140
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
