 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
cjay
Joined: 15 Dec 2007
Posts: 53
|
 Posted: Sat Jul 25, 2015 9:09 am Post subject: flo scan |
 |
|
Anyone ever have a flo scan transducer fail on them?
A search has brought lots of discussion on location, but no discussion on how long they last.
I've been having problems with my EIS 6000 and having a hard time tracking down the problem. Basically it works on and off, when not working the screen goes berserk before it shuts down. GRT even bench tested it and said it was fine, that maybe the problem was one of the sensors was putting more than 5volts into one an Aux channel. Right now it's show my fuel flow is not working so I was going to try replacing it. Before I buy one I thought I'd ask the group to see if anyone had any other ideas?
cjay
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
jesse(at)saintaviation.co
Guest
|
| Posted: Sat Jul 25, 2015 11:30 am Post subject: flo scan |
|
|
I've heard recently of another EIS doing this exact same thing. Disconnect the auxin puts and plug one back in at a time to see which one introduces the problem.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
C: 352-427-0285
F: 815-377-3694
Sent from my iPhone
| Quote: | On Jul 25, 2015, at 1:09 PM, cjay <cgfinney(at)yahoo.com> wrote:
Anyone ever have a flo scan transducer fail on them?
A search has brought lots of discussion on location, but no discussion on how long they last.
I've been having problems with my EIS 6000 and having a hard time tracking down the problem. Basically it works on and off, when not working the screen goes berserk before it shuts down. GRT even bench tested it and said it was fine, that maybe the problem was one of the sensors was putting more than 5volts into one an Aux channel. Right now it's show my fuel flow is not working so I was going to try replacing it. Before I buy one I thought I'd ask the group to see if anyone had any other ideas?
cjay
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=445186#445186
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
n223rv(at)wolflakeairport
Guest
|
| Posted: Sat Jul 25, 2015 12:52 pm Post subject: flo scan |
|
|
I had one fail on a O-320.
Sent from my iPhone
| Quote: | On Jul 25, 2015, at 12:09 PM, cjay <cgfinney(at)yahoo.com> wrote:
Anyone ever have a flo scan transducer fail on them?
A search has brought lots of discussion on location, but no discussion on how long they last.
I've been having problems with my EIS 6000 and having a hard time tracking down the problem. Basically it works on and off, when not working the screen goes berserk before it shuts down. GRT even bench tested it and said it was fine, that maybe the problem was one of the sensors was putting more than 5volts into one an Aux channel. Right now it's show my fuel flow is not working so I was going to try replacing it. Before I buy one I thought I'd ask the group to see if anyone had any other ideas?
cjay
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=445186#445186
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
cjay
Joined: 15 Dec 2007
Posts: 53
|
| Posted: Mon Jul 27, 2015 2:12 pm Post subject: Re: flo scan |
|
|
I guess I could try this, but the problem doesn't show up until flight, so this would take a lot of flight testing, but maybe I could do it on the gnd.
| jesse(at)saintaviation.co wrote: | I've heard recently of another EIS doing this exact same thing. Disconnect the auxin puts and plug one back in at a time to see which one introduces the problem.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
C: 352-427-0285
F: 815-377-3694
Sent from my iPhone
| Quote: | On Jul 25, 2015, at 1:09 PM, cjay <cgfinney> wrote:
Anyone ever have a flo scan transducer fail on them?
A search has brought lots of discussion on location, but no discussion on how long they last.
I've been having problems with my EIS 6000 and having a hard time tracking down the problem. Basically it works on and off, when not working the screen goes berserk before it shuts down. GRT even bench tested it and said it was fine, that maybe the problem was one of the sensors was putting more than 5volts into one an Aux channel. Right now it's show my fuel flow is not working so I was going to try replacing it. Before I buy one I thought I'd ask the group to see if anyone had any other ideas?
cjay
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=445186#445186
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
