 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
civengpe
Joined: 14 Feb 2011
Posts: 105
|
 Posted: Mon Jul 06, 2015 8:21 am Post subject: Windshield Sequence |
 |
|
Since I am about to mount my windshield I have been running through the timing of the steps in my head and need a little clarification if you guys can.
How long can I leave the bare aluminum after etching before applying the fiberglass? I figure I need to etch before gluing the windshield to the cabin top and I need to wait for this to cure prior to starting my layups.
Also, is it advisable to apply Alodine 1201 after the Alumiprep?
Thanks again!
Shannon Hicks
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
Dave Saylor
Joined: 11 Jan 2015
Posts: 210
Location: GILROY, CA
|
| Posted: Mon Jul 06, 2015 8:57 am Post subject: Windshield Sequence |
|
|
Shannon-
Yes, you should apply Alodine after the alumniprep. After that your only real concern would be surface contamination, so as long as the surface stays clean you have essentially as much time as you need. Cover the treated area to keep contaminants off the aluminum then degrease with acetone, etc., just before you apply resin and you should be fine.
--Dave
On Monday, July 6, 2015, Shannon Hicks <civeng123(at)gmail.com (civeng123(at)gmail.com)> wrote:
[quote]Since I am about to mount my windshield I have been running through the timing of the steps in my head and need a little clarification if you guys can.
How long can I leave the bare aluminum after etching before applying the fiberglass? I figure I need to etch before gluing the windshield to the cabin top and I need to wait for this to cure prior to starting my layups.
Also, is it advisable to apply Alodine 1201 after the Alumiprep?
Thanks again!
Shannon Hicks
| Quote: |
get="_blank">http://www.matronics.com/Navigator?RV10-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
--Dave
KWVI |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
