Matronics Email Lists :: View topic - Need measurement on M3X with 912

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Need measurement on M3X with 912

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

jodymorgan(at)earthlink.n
Guest

Posted: Thu Jun 04, 2015 7:21 am Post subject: Need measurement on M3X with 912

Hey All,

I'm building a M3X planning to mount a Suzuki 4 cyl engine on it.

I need the distance from the center of the prop hub to the top of the main boom tube to see what I have to do to get the prop at the same height as the 912.

Hope that makes sense.   

Thanks,

Jody

  [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

colin.scott.hudson(at)gma
Guest

Posted: Thu Jun 04, 2015 11:46 am Post subject: Need measurement on M3X with 912

Jody I have a factory built M3X with a Jabiru 2200 in it.  It's 38 1/4".

Scott Hudson

N424AL



Sent from my iPhone



On Jun 4, 2015, at 10:21 AM, jody morgan <jodymorgan(at)earthlink.net (jodymorgan(at)earthlink.net)> wrote:

[quote]Hey All,

I'm building a M3X planning to mount a Suzuki 4 cyl engine on it.

I need the distance from the center of the prop hub to the top of the main boom tube to see what I have to do to get the prop at the same height as the 912.

Hope that makes sense.   

Thanks,

Jody

   	  Quote: 	
		  

	


[b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

jodymorgan(at)earthlink.n
Guest

Posted: Mon Jun 08, 2015 4:01 pm Post subject: Need measurement on M3X with 912

Hey All,Big Question?

  

 Does the 912 need a prop hub extension when mounted  to the M3C or M3X?

 Wanting to mount the Suzuki 1.3 with Raven Redrive  on the M3X I'm building, but the Raven Redrive will not accept a prop hub  extension.

  

 Trying to match the distance from the 912 to the  prop without an extension to match the distance for the Suzuki, so if the 912  requires a prop hub extension when mounted to the M3X it would change my whole  set up calculations or maybe eliminate the Suzuki with that  Redrive.

  

 Tried to look it up in the archives but haven't got  that figured out yet.

  

 If it does require a prop hub extension, how long  of one does it need?

  

 Thanks in advance for any help.

 Jody



On Thu, Jun 4, 2015 at 8:21 AM, jody morgan <jodymorgan(at)earthlink.net (jodymorgan(at)earthlink.net)> wrote:

[quote]Hey All,

I'm building a M3X planning to mount a Suzuki 4 cyl engine on it.

I need the distance from the center of the prop hub to the top of the main boom tube to see what I have to do to get the prop at the same height as the 912.

Hope that makes sense.   

Thanks,

Jody

   	  Quote: 	
		  



get="_blank">http://www.matronics.com/Navigator?Kolb-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	
[b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Flylawnchairs

Joined: 04 Jul 2015
Posts: 10

Posted: Tue Jul 07, 2015 7:30 am Post subject: Re: Need measurement on M3X with 912

Hi Jody, I'm building an mx3 also but am in the early stages. Can you tell me the location of your horizontal stab leading edge tube in relation to where it is mounted on the boom tube ? There seems to be a discrepancy in my construction manual ( 2004 ) to newer models. Thanks for any help you can give.

Gene Wilson

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum