Matronics Email Lists :: View topic - Governor control cable

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Governor control cable

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

johnwigney(at)windstream.
Guest

Posted: Wed Aug 05, 2015 5:54 am Post subject: Governor control cable

Hi Greg,

       

       I use an A-750         vernier control with a blue knob from Aircraft Spruce for       the Jihostroj governor which controls my WhirlWind constant speed       prop. It has served perfectly since 2001. I do not remember the       length but if you need any pics of the setup, please let me know.

       

       Cheers, John

       

       N262WF, mono XS, 912S

       Mooresville, North Carolina

       [img]cid:part2.04050608.08000907(at)windstream.net[/img][img]cid:part3.05030401.00030301(at)windstream.net[/img]

       

       

       ORIGINAL MESSAGE

     

      	  Quote: 	
		          	  Quote: 	
		  From: "Greg Fuchs " <gregoryf.flyboy(at)comcast.net> (gregoryf.flyboy(at)comcast.net)

Subject: governer control cable

Europhiles,

For those that have a hydraulic governor such as jihostroj, commonly used on 914 constant speed applications, what did you use for the control cable / where did you get it? I cannot seem to find any info on the normal 914 parts sites.

Thanks, Greg F

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

badgibfd.png

Description:

Filesize:

145.22 KB

Viewed:

1385 Time(s)

33_KB_Matronics_You_tube_pic.jpg

Description:

Filesize:

33.23 KB

Viewed:

1385 Time(s)

gregoryf.flyboy(at)comcas
Guest

Posted: Wed Aug 05, 2015 7:14 am Post subject: Governor control cable

Hi John,

 Yes, by all means send me some pics. My setup is for the  whirlwind as well. I especially want to know what kind of bracket you  used to hold the cable (near the governor) and how long the shaft is that  connects up to the swivel joint (I think I will have a tight turning  radius). A few pics should answer all my questions. I have a bracket for  another common aircraft that is supposed to work with the jihostroj, but it is  not a good fit. It can be modified however, but there appears to be a  bracket built-in at the top of the Rotax too that just might work, but I have  not found any info on it yet..it is in the approximate correct position to  potentially hold the cable.

  

 I would also like a pic of where you placed the knob, and  where the cabling went through the firewall as well. The cabling might be stiff  and I am not sure I can get it to exit the top of the engine cage, similar to  the throttle and choke cables.

 My intention is to use a lever, and not a vernier, but it is  all similar, except for the end. Vernier is the contingency plan if the lever  doesn't work well.

 Thanks much in advance!

 Greg Fuchs A050



   From: John Wigney  [mailto:johnwigney(at)windstream.net] 

Sent: Wednesday, August 05, 2015  6:53 AM

To: gregoryf.flyboy; Europa-List

Subject: Re:  Governor control cable

 

 Hi Greg,



I use an A-750  vernier control with a blue knob from Aircraft Spruce for the Jihostroj  governor which controls my WhirlWind constant speed prop. It has served  perfectly since 2001. I do not remember the length but if you need any pics of  the setup, please let me know.



Cheers, John



N262WF, mono XS,  912S

Mooresville, North Carolina

[img]cid:912325014(at)05082015-12A0[/img][img]cid:912325014(at)05082015-12A7[/img]

ORIGINAL  MESSAGE



  	  Quote: 	
		   	  Quote: 	
		  From: "Greg Fuchs " <gregoryf.flyboy(at)comcast.net> (gregoryf.flyboy(at)comcast.net)

Subject: governer control cable

Europhiles,

For those that have a hydraulic governor such as jihostroj, commonly used on 914 constant speed applications, what did you use for the control cable / where did you get it? I cannot seem to find any info on the normal 914 parts sites.

Thanks, Greg F

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

badgibfd.png

Description:

Filesize:

145.22 KB

Viewed:

1381 Time(s)

33_KB_Matronics_You_tube_pic.jpg

Description:

Filesize:

33.23 KB

Viewed:

1381 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum