Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Antenna troubleshooting

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
donjohnston



Joined: 13 Dec 2009
Posts: 231

PostPosted: Sat Sep 19, 2015 2:48 pm    Post subject: Antenna troubleshooting Reply with quote

I've got (what I think is) a peculiar antenna problem.

Composite aircraft with foil antennas embedded in the wings per RST Engineering manual.

I have discovered that I couldn't hear anything on Com2. All aspects of Com1 work fine.

When I key the mic three times on Com2 (for airport information), I don't hear anything (no surprise). But if I switch to Com 1, I hear the announcement. Which indicates to me that the mic keying is being transmitted. (I haven't been able to do a voice check yet).

As a test, I swapped the antennas to the radios. The problem moves with the antenna. So I figure it's either a bad connector termination, bad cable, or bad antenna. I'm planning on checking for continuity between the center conductor and shield from the radio to and the last connector which should tell me if it's the cable.

Does anyone know of way to you have any suggestions as to how to determine if the antenna is causing the problem?

Thanks,
Don


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
user9253



Joined: 28 Mar 2008
Posts: 1920
Location: Riley TWP Michigan

PostPosted: Sat Sep 19, 2015 4:08 pm    Post subject: Re: Antenna troubleshooting Reply with quote

It is highly unlikely that the cable is bad unless it has been pinched or bent with too small of a radius. The most likely problem is a bad connection between the coax and one of its connectors or between connector and antenna. The antenna foil could be cracked.

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores
Back to top
View user's profile Send private message
donjohnston



Joined: 13 Dec 2009
Posts: 231

PostPosted: Mon Sep 21, 2015 1:43 pm    Post subject: Re: Antenna troubleshooting Reply with quote

Problem identified and resolved.

The BNC connector on the wing root had a short. I really thought that I checked each connector when I installed them. Either I missed this one (likely) or the short developed after (unlikely but I'm going with that explanation).

Re-terminated and all is well.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group