 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
dougsappllc(at)gmail.com
Guest
|
 Posted: Sun Oct 04, 2015 11:01 am Post subject: CJ6 Stainless steel MAIN air tank |
 |
|
CJ owners:
We have just received the first run of the new stainless steel main air tanks. This tank should be the last air tank which you should ever have to buy, and depending on the opinion of your mechanic, the fact that it is stainless should negate the need for future inspections. It's my opinion that this tank is about as close to a forever or lifetime tank as you can get, that being said I would still recommend removing and cleaning the tank on a biannual basis which will go a long way in extending the life of your QDF-1, and gear and flap valves.
Due to the high cost of manufacture this first test run was only 20 tanks, if they are well received I will order up additional stock. In 60 days we will have 20 CJ6 emergency tanks in stock also.
When ordering please ask for H2-5505-40SS which is the tank alone without fittings. No problem using your old plug and nipple in the new tanks, but new crush washer/seals should be installed.
Should you prefer new fittings please order the following:
H2-H2-5505-31 Nipple 1 ea
H2-H2-5505-32/1 Copper crush washer 2 each
H2-5506-13 Plug 1 each
Please contact me off list if interested.
Best,
Doug
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
byronmfox(at)gmail.com
Guest
|
| Posted: Sun Oct 04, 2015 11:42 am Post subject: CJ6 Stainless steel MAIN air tank |
|
|
Forgive my crassness, Douglas, but the altogether reasonable price would be, what?
Blitz Fox415-307-2405
On Oct 4, 2015, at 11:58 AM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
[quote]CJ owners:
We have just received the first run of the new stainless steel main air tanks. This tank should be the last air tank which you should ever have to buy, and depending on the opinion of your mechanic, the fact that it is stainless should negate the need for future inspections. It's my opinion that this tank is about as close to a forever or lifetime tank as you can get, that being said I would still recommend removing and cleaning the tank on a biannual basis which will go a long way in extending the life of your QDF-1, and gear and flap valves.
Due to the high cost of manufacture this first test run was only 20 tanks, if they are well received I will order up additional stock. In 60 days we will have 20 CJ6 emergency tanks in stock also.
When ordering please ask for H2-5505-40SS which is the tank alone without fittings. No problem using your old plug and nipple in the new tanks, but new crush washer/seals should be installed.
Should you prefer new fittings please order the following:
H2-H2-5505-31 Nipple 1 ea
H2-H2-5505-32/1 Copper crush washer 2 each
H2-5506-13 Plug 1 each
Please contact me off list if interested.
Best,
Doug
| Quote: |
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ist"">http://www.matronics.com/Navigator?Yak-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
dougsappllc(at)gmail.com
Guest
|
| Posted: Sun Oct 04, 2015 12:36 pm Post subject: CJ6 Stainless steel MAIN air tank |
|
|
Blitz,No problem at all. The cost for the stainless steel "forever" tank is $800.00 per tank, a little less than twice the current cost of $485.00 for the old style std steel tank. As you may already know the stock steel tanks are becoming nearly impossible to find at any price. Considering the expected life, and the fact that you will no longer have the cost to inspect, I think it is a fair price and in time I think you will see it as a selling point. Â
I will continue to stock the standard steel tanks when ever I can find them, last shipment I ordered 12 and was able to receive only 2.
We expect the smaller emergency tank will be slightly less expensive.
The remaining small bits, the nipple, plug and crush seals total about $27.00.
Best,
Doug
On Sun, Oct 4, 2015 at 11:58 AM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
[quote]CJ owners:
We have just received the first run of the new stainless steel main air tanks. This tank should be the last air tank which you should ever have to buy, and depending on the opinion of your mechanic, the fact that it is stainless should negate the need for future inspections. It's my opinion that this tank is about as close to a forever or lifetime tank as you can get, that being said I would still recommend removing and cleaning the tank on a biannual basis which will go a long way in extending the life of your QDF-1, and gear and flap valves.
Due to the high cost of manufacture this first test run was only 20 tanks, if they are well received I will order up additional stock. In 60 days we will have 20 CJ6 emergency tanks in stock also.
When ordering please ask for H2-5505-40SS which is the tank alone without fittings. No problem using your old plug and nipple in the new tanks, but new crush washer/seals should be installed.
Should you prefer new fittings please order the following:
H2-H2-5505-31 Nipple 1 ea
H2-H2-5505-32/1 Copper crush washer 2 each
H2-5506-13 Plug 1 each
Please contact me off list if interested.
Best,
Doug
| Quote: |
et="_blank">http://www.matronics.com/Navigator?Yak-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Viperdoc
Joined: 19 Apr 2014
Posts: 484
Location: 08A
|
| Posted: Sun Oct 04, 2015 1:13 pm Post subject: CJ6 Stainless steel MAIN air tank |
|
|
Doug,
Did you make any Yak tanks?
Doc
Sent from my iPad
On Oct 4, 2015, at 3:33 PM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
[quote]Blitz,No problem at all. The cost for the stainless steel "forever" tank is $800.00 per tank, a little less than twice the current cost of $485.00 for the old style std steel tank. As you may already know the stock steel tanks are becoming nearly impossible to find at any price. Considering the expected life, and the fact that you will no longer have the cost to inspect, I think it is a fair price and in time I think you will see it as a selling point.
I will continue to stock the standard steel tanks when ever I can find them, last shipment I ordered 12 and was able to receive only 2.
We expect the smaller emergency tank will be slightly less expensive.
The remaining small bits, the nipple, plug and crush seals total about $27.00.
Best,
Doug
On Sun, Oct 4, 2015 at 11:58 AM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
| Quote: | CJ owners:
We have just received the first run of the new stainless steel main air tanks. This tank should be the last air tank which you should ever have to buy, and depending on the opinion of your mechanic, the fact that it is stainless should negate the need for future inspections. It's my opinion that this tank is about as close to a forever or lifetime tank as you can get, that being said I would still recommend removing and cleaning the tank on a biannual basis which will go a long way in extending the life of your QDF-1, and gear and flap valves.
Due to the high cost of manufacture this first test run was only 20 tanks, if they are well received I will order up additional stock. In 60 days we will have 20 CJ6 emergency tanks in stock also.
When ordering please ask for H2-5505-40SS which is the tank alone without fittings. No problem using your old plug and nipple in the new tanks, but new crush washer/seals should be installed.
Should you prefer new fittings please order the following:
H2-H2-5505-31 Nipple 1 ea
H2-H2-5505-32/1 Copper crush washer 2 each
H2-5506-13 Plug 1 each
Please contact me off list if interested.
Best,
Doug
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ist"">http://www.matronics.com/Navigator?Yak-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
_________________
Viperdoc |
|
| Back to top |
|
|
byronmfox(at)gmail.com
Guest
|
| Posted: Sun Oct 04, 2015 1:32 pm Post subject: CJ6 Stainless steel MAIN air tank |
|
|
Thanks, Doug. Clearly, it'll out live my three score and sixteen.
Blitz Fox415-307-2405
On Oct 4, 2015, at 1:33 PM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
[quote]Blitz,No problem at all. The cost for the stainless steel "forever" tank is $800.00 per tank, a little less than twice the current cost of $485.00 for the old style std steel tank. As you may already know the stock steel tanks are becoming nearly impossible to find at any price. Considering the expected life, and the fact that you will no longer have the cost to inspect, I think it is a fair price and in time I think you will see it as a selling point.
I will continue to stock the standard steel tanks when ever I can find them, last shipment I ordered 12 and was able to receive only 2.
We expect the smaller emergency tank will be slightly less expensive.
The remaining small bits, the nipple, plug and crush seals total about $27.00.
Best,
Doug
On Sun, Oct 4, 2015 at 11:58 AM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
| Quote: | CJ owners:
We have just received the first run of the new stainless steel main air tanks. This tank should be the last air tank which you should ever have to buy, and depending on the opinion of your mechanic, the fact that it is stainless should negate the need for future inspections. It's my opinion that this tank is about as close to a forever or lifetime tank as you can get, that being said I would still recommend removing and cleaning the tank on a biannual basis which will go a long way in extending the life of your QDF-1, and gear and flap valves.
Due to the high cost of manufacture this first test run was only 20 tanks, if they are well received I will order up additional stock. In 60 days we will have 20 CJ6 emergency tanks in stock also.
When ordering please ask for H2-5505-40SS which is the tank alone without fittings. No problem using your old plug and nipple in the new tanks, but new crush washer/seals should be installed.
Should you prefer new fittings please order the following:
H2-H2-5505-31 Nipple 1 ea
H2-H2-5505-32/1 Copper crush washer 2 each
H2-5506-13 Plug 1 each
Please contact me off list if interested.
Best,
Doug
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ist"">http://www.matronics.com/Navigator?Yak-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
johnrobertnolan(at)gmail.
Guest
|
| Posted: Tue Oct 06, 2015 5:43 am Post subject: CJ6 Stainless steel MAIN air tank |
|
|
Doug,
Any tanks for the Yak-52?
John Nolan
On Sun, Oct 4, 2015 at 4:33 PM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
[quote]Blitz,No problem at all. The cost for the stainless steel "forever" tank is $800.00 per tank, a little less than twice the current cost of $485.00 for the old style std steel tank. As you may already know the stock steel tanks are becoming nearly impossible to find at any price. Considering the expected life, and the fact that you will no longer have the cost to inspect, I think it is a fair price and in time I think you will see it as a selling point. Â
I will continue to stock the standard steel tanks when ever I can find them, last shipment I ordered 12 and was able to receive only 2.
We expect the smaller emergency tank will be slightly less expensive.
The remaining small bits, the nipple, plug and crush seals total about $27.00.
Best,
Doug
On Sun, Oct 4, 2015 at 11:58 AM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
| Quote: | CJ owners:
We have just received the first run of the new stainless steel main air tanks. This tank should be the last air tank which you should ever have to buy, and depending on the opinion of your mechanic, the fact that it is stainless should negate the need for future inspections. It's my opinion that this tank is about as close to a forever or lifetime tank as you can get, that being said I would still recommend removing and cleaning the tank on a biannual basis which will go a long way in extending the life of your QDF-1, and gear and flap valves.
Due to the high cost of manufacture this first test run was only 20 tanks, if they are well received I will order up additional stock. In 60 days we will have 20 CJ6 emergency tanks in stock also.
When ordering please ask for H2-5505-40SS which is the tank alone without fittings. No problem using your old plug and nipple in the new tanks, but new crush washer/seals should be installed.
Should you prefer new fittings please order the following:
H2-H2-5505-31 Nipple 1 ea
H2-H2-5505-32/1 Copper crush washer 2 each
H2-5506-13 Plug 1 each
Please contact me off list if interested.
Best,
Doug
et="_blank">http://www.matronics.com/Navigator?Yak-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
dougsappllc(at)gmail.com
Guest
|
| Posted: Tue Oct 06, 2015 6:02 am Post subject: CJ6 Stainless steel MAIN air tank |
|
|
John,No, not at this time. But if I cold get at least 10 rock solid firm orders for Yak 52 main air tanks I could have them done in tandem with the CJ6 emergency air tanks. That would make them available in 60 days. The way the schedule stands now 52 main tanks are scheduled for sometime in the spring of the year.
Doug
On Tue, Oct 6, 2015 at 6:18 AM, John Nolan <johnrobertnolan(at)gmail.com (johnrobertnolan(at)gmail.com)> wrote:
[quote]Doug,
Any tanks for the Yak-52?
John Nolan
On Sun, Oct 4, 2015 at 4:33 PM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
| Quote: | Blitz,No problem at all. The cost for the stainless steel "forever" tank is $800.00 per tank, a little less than twice the current cost of $485.00 for the old style std steel tank. As you may already know the stock steel tanks are becoming nearly impossible to find at any price. Considering the expected life, and the fact that you will no longer have the cost to inspect, I think it is a fair price and in time I think you will see it as a selling point. Â
I will continue to stock the standard steel tanks when ever I can find them, last shipment I ordered 12 and was able to receive only 2.
We expect the smaller emergency tank will be slightly less expensive.
The remaining small bits, the nipple, plug and crush seals total about $27.00.
Best,
Doug
On Sun, Oct 4, 2015 at 11:58 AM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
| Quote: | CJ owners:
We have just received the first run of the new stainless steel main air tanks. This tank should be the last air tank which you should ever have to buy, and depending on the opinion of your mechanic, the fact that it is stainless should negate the need for future inspections. It's my opinion that this tank is about as close to a forever or lifetime tank as you can get, that being said I would still recommend removing and cleaning the tank on a biannual basis which will go a long way in extending the life of your QDF-1, and gear and flap valves.
Due to the high cost of manufacture this first test run was only 20 tanks, if they are well received I will order up additional stock. In 60 days we will have 20 CJ6 emergency tanks in stock also.
When ordering please ask for H2-5505-40SS which is the tank alone without fittings. No problem using your old plug and nipple in the new tanks, but new crush washer/seals should be installed.
Should you prefer new fittings please order the following:
H2-H2-5505-31 Nipple 1 ea
H2-H2-5505-32/1 Copper crush washer 2 each
H2-5506-13 Plug 1 each
Please contact me off list if interested.
Best,
Doug
et="_blank">http://www.matronics.com/Navigator?Yak-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
et="_blank">http://www.matronics.com/Navigator?Yak-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
keithmckinley
Joined: 11 Aug 2008
Posts: 434
|
| Posted: Tue Oct 20, 2015 1:15 pm Post subject: Re: CJ6 Stainless steel MAIN air tank |
|
|
I may have missed it, but what grade of Stainless steel are these tanks constructed from?
Keith
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
