Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Fwd: Flap + aileron + wing tip alignment

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
trigo(at)mail.telepac.pt
Guest





PostPosted: Fri Nov 13, 2015 8:30 am    Post subject: Fwd: Flap + aileron + wing tip alignment Reply with quote

Enviado do meu iPhone

Too fast hit in the send button....

Quote:

Guys

The plans say to align the aileron, in its neutral position, to the flap when the flap's leading edge hits the wing rear spar doubler.

But doing this, the trailing edge of the FG wing tip does not align with the aileron.

What to do?

Carlos

Quote:

Enviado do meu iPhone


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Bob Turner



Joined: 03 Jan 2009
Posts: 885
Location: Castro Valley, CA

PostPosted: Fri Nov 13, 2015 9:38 am    Post subject: Re: Fwd: Flap + aileron + wing tip alignment Reply with quote

This is common. Fiberglass wingtips too high, too low, too long, etc. You may need to slice open the joint, bend and re-glue, or sand shorter or add glass to lengthen. Don't forget to clamp the elevator neutral during the aileron adjustments - they do move, in tandem, with fore-aft stick motion.

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Bob Turner
RV-10 QB
Back to top
View user's profile Send private message Send e-mail
rv10flyer(at)live.com
Guest





PostPosted: Fri Nov 13, 2015 10:22 am    Post subject: Fwd: Flap + aileron + wing tip alignment Reply with quote

Bob beat me to my response. I was sying to assure the aileron and flap line
up. that is your priority, than I did as Bob mentioned I molded and shapped
the trailing edge of the wingtip to fit. I recall sanding and reinforcement
but I also recall clamping the wingtip to align with aileron (that was
clamped and aligned with Flap) and used a heat gun to soften the fiberglass
to get the last bit of alignment, than finally added some fiberglass cloth
to reinforcement that area. To this day the alignment is the same.

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
carl.froehlich(at)verizon
Guest





PostPosted: Fri Nov 13, 2015 10:44 am    Post subject: Fwd: Flap + aileron + wing tip alignment Reply with quote

This is the reason I tell any builder who will listen to not fit the
wingtips until after you put on the wings (at least temporarily), really
make sure you have the flaps rigged right, then rig the ailerons. Do not
rely on the Van's aileron template for rigging. It will get you close but
not close enough.

Make sure you do as Bob says on clamping the elevators in neutral before
doing any flap, aileron or wing tip fitting. I chased my tail forgetting to
do that a few times.

Carl

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
flying-nut(at)cfl.rr.com
Guest





PostPosted: Fri Nov 13, 2015 11:52 am    Post subject: Fwd: Flap + aileron + wing tip alignment Reply with quote

Same problem on my friends RV-7.  You can drill a hole in the tip on the side that's high, about 8-10" from leading edge, cleco, and push the tip TE so it aligns with aileron.  Use a ratchet strap from wing LE to tip TE to hold the tip in place to drill and rivet.
We also used two ratchet straps to hold the tip to the wing.


Sent from Samsung tablet cruising on the Allure
-------- Original message --------
From Carlos Trigo <trigo(at)mail.telepac.pt>
Date: 11/13/2015 11:27 AM (GMT-05:00)
To rv10-list(at)matronics.com
Subject RV10-List: Fwd: Flap + aileron + wing tip alignment


--> RV10-List message posted by: Carlos Trigo <trigo(at)mail.telepac.pt>

Enviado do meu iPhone

Too fast hit in the send button....

Quote:

Guys

The plans say to align the aileron, in its neutral position, to the flap when the flap's leading edge hits the wing rear spar doubler.

But doing this, the trailing edge of the FG wing tip does not align with the aileron.

What to do?

Carlos

Quote:

Enviado do meu iPhone


_-============================================================
_-=
_-=       -- Please Support Your Lists This Month --
_-=           (And Get Some AWESOME FREE Gifts!)
_-=
_-=   November is the Annual List Fund Raiser.  Click on
_-=   the Contribution link below to find out more about
_-=   this year's Terrific Free Incentive Gifts provided
_-=   by:
_-=  
_-=     * The Builder's Bookstore www.buildersbooks.com
_-=
_-=   List Contribution Web Site:
_-=
_-=   --> http://www.matronics.com/contribution
_-=
_-=   Thank you for your generous support!
_-=
_-=                              -Matt Dralle, List Admin.
_-=
_-============================================================
_-=          - The RV10-List Email Forum -
_-= Use the Matronics List Features Navigator to browse
_-= the many List utilities such as List Un/Subscription,
_-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
_-= Photoshare, and much much more:
_-=
_-=   --> http://www.matronics.com/Navigator?RV10-List
_-=
_-============================================================
_-=               - MATRONICS WEB FORUMS -
_-= Same great content also available via the Web Forums!
_-=
_-=   --> http://forums.matronics.com
_-=
_-============================================================
_-=             - List Contribution Web Site -
_-=  Thank you for your generous support!
_-=                              -Matt Dralle, List Admin.
_-=   --> http://www.matronics.com/contribution
_-============================================================


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Kellym



Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ

PostPosted: Fri Nov 13, 2015 12:17 pm    Post subject: Fwd: Flap + aileron + wing tip alignment Reply with quote

I think that method works best. By having wing, flaps and ailerons
installed and rigged first, then you position the tip to line up, secure
it as best you can, and only then drill the screw holes for the tips.

On 11/13/2015 12:43 PM, Linn Walters wrote:
Quote:
Same problem on my friends RV-7. You can drill a hole in the tip on
the side that's high, about 8-10" from leading edge, cleco, and push
the tip TE so it aligns with aileron. Use a ratchet strap from wing
LE to tip TE to hold the tip in place to drill and rivet.
We also used two ratchet straps to hold the tip to the wing.
Sent from Samsung tablet cruising on the Allure
-------- Original message --------
From Carlos Trigo <trigo(at)mail.telepac.pt>
Date: 11/13/2015 11:27 AM (GMT-05:00)
To rv10-list(at)matronics.com
Subject Fwd: Flap + aileron + wing tip alignment


Enviado do meu iPhone

Too fast hit in the send button....

>
> Guys
>
> The plans say to align the aileron, in its neutral position, to the
flap when the flap's leading edge hits the wing rear spar doubler.

But doing this, the trailing edge of the FG wing tip does not align
with the aileron.

What to do?

Carlos

>
> Enviado do meu iPhone



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group