Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Troubleshooting radio whine/noise on Cessna 182P

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
millner(at)me.com
Guest





PostPosted: Tue Nov 24, 2015 5:14 pm    Post subject: Troubleshooting radio whine/noise on Cessna 182P Reply with quote

Charlie,

The problem is that you're not aware of how Cessna wired the regulator in this 182...

Instead of the OV relay interrupting the current path between the regulator and the field terminal as you propose OBAM folks usually do it, the OV relay and the alternator half of the master switch interrupt the power supply *to* the regulator, via the S or Supply terminal.

However... the automotive version supplies the regulator and alternator from both the S and the A terminal... and once the master is on, the A terminal is hot... so the Cessna OV relay and alternator half of the master switch are irrelevant.

So... an automotive regulator in the Cessna wiring diagram? The alternator is non-controllable... which could be a bad thing.

See attached wiring diagram.

Paul

http://www.secure4host.net/upload/files/Cessna_Alternator_Wiring.pdf

On 11/24/2015 11:18 AM, Charlie England wrote:

Quote:
You do NOT want a Ford automotive regulator... it can cause an overvoltage situation that even an external OV relay cannot overcome (the automotive regulator sources regulator power directly from the alternator, and thus ignores whether the OV relay or alternator half of the master switch are providing power, or not.)

Quote:
Quote:


I can't make sense of this, as long as we're talking about an externally regulated alternator. Ford style regulators are flying in thousands of homebuilts safely (assuming that OV protection is used). As long as the wire to the field is interrupted, the alternator cannot produce power. Typical OV protection circuits either open the field lead or 'crowbar' it to ground, tripping the field circuit breaker (which breaks the field circuit). Either way, there's no way for the regulator to keep the alternator operating.




- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group