Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Slick mags 1100 hrs

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
flysrv10(at)gmail.com
Guest





PostPosted: Mon Dec 28, 2015 7:25 am    Post subject: Slick mags 1100 hrs Reply with quote

Tim,
I had to cut the tangs off my new cushions. Once cut, they are exactly the same as the old cushions and fit perfect.
I have forwarded my initial conversation with Lycoming but did not continue the inquiry once I saw that I can modify the new part to fit my mag drive.
You might contact them if you feel that the modified cushions are not appropriate. I did not feel replacing the my mag drives for new mag drives was necessary.
Do not archive.

Rob Kermanj
Sent from my iPad

Begin forwarded message:
Quote:
From: "Day, Deborah" <DDay(at)lycoming.com (DDay(at)lycoming.com)>
Date: December 16, 2015 at 8:46:15 AM MST
To: "flysrv10(at)gmail.com (flysrv10(at)gmail.com)" <flysrv10(at)gmail.com (flysrv10(at)gmail.com)>
Subject: RE: Lycoming Website Contact Us Inquiry

Quote:
<![endif]--> <![endif]-->
Kermanj,
P/N LW-13641 superseded by P/N 68H22624 CUSHION- MAGNETO DRIVE attached is a reference for you.

Best Regards,
Deb


From: Technicalsupportn (Lycoming)
Sent: Monday, December 14, 2015 9:51 AM
To: Day, Deborah
Subject: FW: Lycoming Website Contact Us Inquiry



Hello Deb,

Would you be able to assist Rob?

Best Regards,

Heath Johnson
Field Service Technical Representative
Lycoming Engines, a div. of Avco Corporation
Phone: 570-327-7335
Fax: 570-327-7101
hjohnson(at)lycoming.com (hjohnson(at)lycoming.com)
NOTICE: This E-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. §§ 2510-2521, is confidential and may be legally privileged. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Please reply to the sender that you have received the message in error, and then delete it. Thank you.


From: Lycoming Communications
Sent: Tuesday, December 08, 2015 2:11 PM
To: Technicalsupportn (Lycoming)
Subject: Lycoming Website Contact Us Inquiry

Lycoming Website Contact Us Inquiry:
First Name: rob
Last Name: Kermanj
Company Name: Company Name
Email: flysrv10(at)gmail.com (flysrv10(at)gmail.com)
Phone: 7724181417
City: Port Saint Lucie
Address: 12350 Golden Eagle Street
State: FL
Zip: 34987-2531
Country: United States
Comment: Hi, I have a IO-540 SN L1427-48. Mag cushion LW-13641 has been replaced with a new model with a tang. However, my engine does not have a tang and I wonder what is the exact replacement part for my mag drive. Thank you Rob.


Quote:



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List



SI1299B[1].pdf
 Description:

Download
 Filename:  SI1299B[1].pdf
 Filesize:  46.22 KB
 Downloaded:  737 Time(s)

Back to top
Tim Olson



Joined: 25 Jan 2007
Posts: 2872

PostPosted: Mon Dec 28, 2015 8:54 am    Post subject: Slick mags 1100 hrs Reply with quote

Thanks a ton Rob! That was one of my big questions...was the size
right if I cut the tangs off. It's funny that they didn't make
a mention of that to you in the correspondence but if the fit
with the tang removed is the same, it would make sense that it
would work just fine. As long as the rest of that part is
physically the same, I'll be happy. It just caught me off
guard that I ordered the old number and got the new style.
I'm glad I'm not the only one who's had that happen...and you
even got yours from Lycoming.

Tim

On 12/28/2015 9:21 AM, Rob Kermanj wrote:
Quote:
Tim,

I had to cut the tangs off my new cushions. Once cut, they are exactly
the same as the old cushions and fit perfect.

I have forwarded my initial conversation with Lycoming but did not
continue the inquiry once I saw that I can modify the new part to fit my
mag drive.

You might contact them if you feel that the modified cushions are not
appropriate. I did not feel replacing the my mag drives for new mag
drives was necessary.

Do not archive.

Rob Kermanj
Sent from my iPad

Begin forwarded message:

> *From:* "Day, Deborah" <DDay(at)lycoming.com <mailto:DDay(at)lycoming.com>>
> *Date:* December 16, 2015 at 8:46:15 AM MST
> *To:* "flysrv10(at)gmail.com <mailto:flysrv10(at)gmail.com>"
> <flysrv10(at)gmail.com <mailto:flysrv10(at)gmail.com>>
> *Subject:* *RE: Lycoming Website Contact Us Inquiry*
>
> Kermanj,
>
> P/N LW-13641 superseded by P/N 68H22624 CUSHION- MAGNETO DRIVE
> attached is a reference for you.
>
> Best Regards,
>
> Deb
>
> *From:*Technicalsupportn (Lycoming)
> *Sent:* Monday, December 14, 2015 9:51 AM
> *To:* Day, Deborah
> *Subject:* FW: Lycoming Website Contact Us Inquiry
>
> Hello Deb,
>
> Would you be able to assist Rob?
>
> Best Regards,
>
> *Heath Johnson*
>
> Field Service Technical Representative
>
> Lycoming Engines, a div. of Avco Corporation
>
> Phone: 570-327-7335
>
> Fax: 570-327-7101
>
> hjohnson(at)lycoming.com <mailto:hjohnson(at)lycoming.com>
>
> NOTICE: This E-mail (including attachments) is covered by the
> Electronic Communications Privacy Act, 18 U.S.C. §§ 2510-2521, is
> confidential and may be legally privileged. If you are not the
> intended recipient, you are hereby notified that any retention,
> dissemination, distribution, or copying of this communication is
> strictly prohibited. Please reply to the sender that you have received
> the message in error, and then delete it. Thank you.
>
> *From:*Lycoming Communications
> *Sent:* Tuesday, December 08, 2015 2:11 PM
> *To:* Technicalsupportn (Lycoming)
> *Subject:* Lycoming Website Contact Us Inquiry
> Lycoming Website Contact Us Inquiry:
>
> First Name: rob
>
> Last Name: Kermanj
>
> Company Name: Company Name
>
> Email: flysrv10(at)gmail.com <mailto:flysrv10(at)gmail.com>
>
> Phone: 7724181417
>
> City: Port Saint Lucie
>
> Address: 12350 Golden Eagle Street
>
> State: FL
>
> Zip: 34987-2531
>
> Country: United States
>
> Comment: Hi, I have a IO-540 SN L1427-48. Mag cushion LW-13641 has
> been replaced with a new model with a tang. However, my engine does
> not have a tang and I wonder what is the exact replacement part for my
> mag drive. Thank you Rob.
>


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
flysrv10(at)gmail.com
Guest





PostPosted: Tue Dec 29, 2015 3:51 pm    Post subject: Slick mags 1100 hrs Reply with quote

Bought mine from aircraft acc stories and contact d Lycoming to be sure it was the only part available.

I also made sure thatcher are physically the same once the tangs were cut.

Do not archive.

Rob Kermanj
Sent from my iPad

Quote:
On Dec 28, 2015, at 9:50 AM, Tim Olson <Tim(at)MyRV10.com> wrote:



Thanks a ton Rob! That was one of my big questions...was the size
right if I cut the tangs off. It's funny that they didn't make
a mention of that to you in the correspondence but if the fit
with the tang removed is the same, it would make sense that it
would work just fine. As long as the rest of that part is
physically the same, I'll be happy. It just caught me off
guard that I ordered the old number and got the new style.
I'm glad I'm not the only one who's had that happen...and you
even got yours from Lycoming.

Tim

> On 12/28/2015 9:21 AM, Rob Kermanj wrote:
> Tim,
>
> I had to cut the tangs off my new cushions. Once cut, they are exactly
> the same as the old cushions and fit perfect.
>
> I have forwarded my initial conversation with Lycoming but did not
> continue the inquiry once I saw that I can modify the new part to fit my
> mag drive.
>
> You might contact them if you feel that the modified cushions are not
> appropriate. I did not feel replacing the my mag drives for new mag
> drives was necessary.
>
> Do not archive.
>
> Rob Kermanj
> Sent from my iPad
>
> Begin forwarded message:
>
>> *From:* "Day, Deborah" <DDay(at)lycoming.com <mailto:DDay(at)lycoming.com>>
>> *Date:* December 16, 2015 at 8:46:15 AM MST
>> *To:* "flysrv10(at)gmail.com <mailto:flysrv10(at)gmail.com>"
>> <flysrv10(at)gmail.com <mailto:flysrv10(at)gmail.com>>
>> *Subject:* *RE: Lycoming Website Contact Us Inquiry*
>>
>> Kermanj,
>>
>> P/N LW-13641 superseded by P/N 68H22624 CUSHION- MAGNETO DRIVE
>> attached is a reference for you.
>>
>> Best Regards,
>>
>> Deb
>>
>> *From:*Technicalsupportn (Lycoming)
>> *Sent:* Monday, December 14, 2015 9:51 AM
>> *To:* Day, Deborah
>> *Subject:* FW: Lycoming Website Contact Us Inquiry
>>
>> Hello Deb,
>>
>> Would you be able to assist Rob?
>>
>> Best Regards,
>>
>> *Heath Johnson*
>>
>> Field Service Technical Representative
>>
>> Lycoming Engines, a div. of Avco Corporation
>>
>> Phone: 570-327-7335
>>
>> Fax: 570-327-7101
>>
>> hjohnson(at)lycoming.com <mailto:hjohnson(at)lycoming.com>
>>
>> NOTICE: This E-mail (including attachments) is covered by the
>> Electronic Communications Privacy Act, 18 U.S.C. §§ 2510-2521, is
>> confidential and may be legally privileged. If you are not the
>> intended recipient, you are hereby notified that any retention,
>> dissemination, distribution, or copying of this communication is
>> strictly prohibited. Please reply to the sender that you have received
>> the message in error, and then delete it. Thank you.
>>
>> *From:*Lycoming Communications
>> *Sent:* Tuesday, December 08, 2015 2:11 PM
>> *To:* Technicalsupportn (Lycoming)
>> *Subject:* Lycoming Website Contact Us Inquiry
>>
>>
>> Lycoming Website Contact Us Inquiry:
>>
>> First Name: rob
>>
>> Last Name: Kermanj
>>
>> Company Name: Company Name
>>
>> Email: flysrv10(at)gmail.com <mailto:flysrv10(at)gmail.com>
>>
>> Phone: 7724181417
>>
>> City: Port Saint Lucie
>>
>> Address: 12350 Golden Eagle Street
>>
>> State: FL
>>
>> Zip: 34987-2531
>>
>> Country: United States
>>
>> Comment: Hi, I have a IO-540 SN L1427-48. Mag cushion LW-13641 has
>> been replaced with a new model with a tang. However, my engine does
>> not have a tang and I wonder what is the exact replacement part for my
>> mag drive. Thank you Rob.







- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group