Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Making videos

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
rickofudall



Joined: 19 Sep 2009
Posts: 1392
Location: Udall, KS, USA

PostPosted: Sun Jan 17, 2016 1:32 pm    Post subject: Making videos Reply with quote

When I finally saved up enough to replace my POS Dell laptop I bought an Acer with Windows 10 already installed and was delighted to find that Movie Maker is back. I've made camera mounts for my trike and for Christmas I went looking through Amazon for the latest offerings in action cams. It's amazing what's out there but, as always, money is tight when it comes to toys. I found some good reviews for a GoPro clone marketed by Peyou US Ltd. 

http://smile.amazon.com/gp/product/B00X5LM4NW?keywords=sj4000%20camera&qid=1453065702&ref_=sr_ph&sr=1

I'm having an issue that I can't decide is a camera or a mount issue. I've put two short clips on You Tube so the engineer I'm working with can see what is very hard to describe. In the first:

https://youtu.be/wQQQHRxujO8
you can see the problem. If I decide to make a video called "Kanandreas, Richter 11.0" I've got the special effects nailed.
But when I throttle back for landing everything smooths out:
https://youtu.be/t2z0roXMUBI

So, there's certainly fuel for hope that it can be ironed out. On my end I'm going to isolate the camera on a block of Sorbothane and add a lead weight as an inertial damper.
The best part is that these little action cams are $54 on Amazon. Add two 32 gigabyte micro SD cards and the tab comes to a little over $80.
Disclaimer, I neither own stock nor am I in any way connected to Peyou US Ltd. I just bought a couple of their cameras.
I know everyone enjoys Larry C's videos so I thought I'd pass along what I've found in my latest delve into videos.

Rick Girard
PS I tried them out for stills, too. It has a bit of a fisheye look (the camera is claimed to have a 170 degree field of view) but it's better than most phones can do.
--
“Blessed are the cracked, for they shall let in the light.”   Groucho Marx


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



02060003.JPG
 Description:
 Filesize:  2.62 MB
 Viewed:  2154 Time(s)

02060003.JPG



_________________
The smallest miracle right in front of you is enough to make you happy....
Back to top
View user's profile Send private message Send e-mail
lcottrell



Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or

PostPosted: Sun Jan 17, 2016 3:10 pm    Post subject: Making videos Reply with quote

you can see the problem. If I decide to make a video called "Kanandreas, Richter 11.0" I've got the special effects nailed.
But when I throttle back for landing everything smooths out:
=======
For me padding did not solve the harmonics problem. The best that I found was off the nose pod as solid as I could make it. You still get a bit during throttle down, but better every where else. I also found that mine settled down at different speeds, best was the high end of the throttle range. Your best bet is to find the spot on the plane where the vibration is the least.
Good luck
Larry
On Sun, Jan 17, 2016 at 2:28 PM, Richard Girard <aslsa.rng(at)gmail.com (aslsa.rng(at)gmail.com)> wrote:
Quote:
When I finally saved up enough to replace my POS Dell laptop I bought an Acer with Windows 10 already installed and was delighted to find that Movie Maker is back. I've made camera mounts for my trike and for Christmas I went looking through Amazon for the latest offerings in action cams. It's amazing what's out there but, as always, money is tight when it comes to toys. I found some good reviews for a GoPro clone marketed by Peyou US Ltd. 

http://smile.amazon.com/gp/product/B00X5LM4NW?keywords=sj4000%20camera&qid=1453065702&ref_=sr_ph&sr=1

I'm having an issue that I can't decide is a camera or a mount issue. I've put two short clips on You Tube so the engineer I'm working with can see what is very hard to describe. In the first:

https://youtu.be/wQQQHRxujO8
you can see the problem. If I decide to make a video called "Kanandreas, Richter 11.0" I've got the special effects nailed.
But when I throttle back for landing everything smooths out:
https://youtu.be/t2z0roXMUBI

So, there's certainly fuel for hope that it can be ironed out. On my end I'm going to isolate the camera on a block of Sorbothane and add a lead weight as an inertial damper.
The best part is that these little action cams are $54 on Amazon. Add two 32 gigabyte micro SD cards and the tab comes to a little over $80.
Disclaimer, I neither own stock nor am I in any way connected to Peyou US Ltd. I just bought a couple of their cameras.
I know everyone enjoys Larry C's videos so I thought I'd pass along what I've found in my latest delve into videos.

Rick Girard
PS I tried them out for stills, too. It has a bit of a fisheye look (the camera is claimed to have a 170 degree field of view) but it's better than most phones can do.
--
“Blessed are the cracked, for they shall let in the light.”   Groucho Marx



--
The older I get, the less tolerant I am of those who are intolerant.


If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group