Matronics Email Lists :: View topic - wiring my amerri-king A-350 to my Narco AT-50A

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

wiring my amerri-king A-350 to my Narco AT-50A

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Wed Mar 02, 2016 8:00 am Post subject: wiring my amerri-king A-350 to my Narco AT-50A

At 09:04 PM 2/29/2016, you wrote:

  	  Quote: 	
		  Thanks.

 The bare wire of the encoder seems no to fit anywhere, but it's usually ground wire. What's the difference with the Black one wich is also a ground wire ?

  	  Quote: 	
		  	
	
 

   The black, insulated wire is USUALLY a power/signal

   ground having significance with the operations of

   the device. A bare wire has to be a shield ground

   for the harness.  Do an ohmmeter check to see if

   the bare wire has continuity at the encoder end.

   If so, then leave it unconnected at the transponder

   end.  OTHERWISE, connect it to the same ground

   as the black insulated wire at the transponder

   end.



 

 

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum