Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

info on this terminal

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
kenryan



Joined: 20 Oct 2009
Posts: 426

PostPosted: Sun Mar 20, 2016 2:15 pm    Post subject: info on this terminal Reply with quote

Are the terminals on this switch solder only or is there a push on connector that matches?[img]cid:ii_1539616375b04dcb[/img]

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



switch.jpg
 Description:
 Filesize:  57.64 KB
 Viewed:  2264 Time(s)

switch.jpg


Back to top
View user's profile Send private message
Bob McC



Joined: 09 Jan 2006
Posts: 258
Location: Toronto, ON

PostPosted: Sun Mar 20, 2016 3:01 pm    Post subject: info on this terminal Reply with quote

Solder !

You may find a narrow female tab which “sort of” fits but it is not an intended application and is not recommended.

Bob McC


From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Ken Ryan
Sent: Sunday, March 20, 2016 6:13 PM
To: aeroelectric-list(at)matronics.com
Subject: info on this terminal


Are the terminals on this switch solder only or is there a push on connector that matches?[img]cid:image002.jpg(at)01D182DA.A86ECC50[/img]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



image002.jpg
 Description:
 Filesize:  8.59 KB
 Viewed:  2262 Time(s)

image002.jpg



_________________
Bob McC
Falco #908
(just starting)
Back to top
View user's profile Send private message Send e-mail
chaskuss(at)yahoo.com
Guest





PostPosted: Sun Mar 20, 2016 3:06 pm    Post subject: info on this terminal Reply with quote

Soldering a wire onto this sensor would risk ruining the sensor. I believe the intended connection method is to use a matching ring terminal on the wire. Fasten the wire to the terminal using the appropriate screw, 2 flat washers and a Nyloc nut. Certainly not my favorite type of terminal on a sensor exposed to engine vibration. A sensor like this would best be used on a transducer manifold block, mounted to the firewall. Vans aircraft sells such a manifold block. It's listed on the bottom of page 30 of their catalog. You can download the catalog here.

http://www.vansaircraft.com/public/download/2015-2016_Catalog.pdf

Charlie
--------------------------------------------
On Sun, 3/20/16, Ken Ryan <keninalaska(at)gmail.com> wrote:

Subject: info on this terminal
To: "aeroelectric-list(at)matronics.com" <aeroelectric-list(at)matronics.com>
Date: Sunday, March 20, 2016, 6:12 PM

Are the terminals on
this switch solder only or is there a push on connector that
matches?


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
kenryan



Joined: 20 Oct 2009
Posts: 426

PostPosted: Sun Mar 20, 2016 5:00 pm    Post subject: info on this terminal Reply with quote

Thank you Bob and Lyle.

On Sun, Mar 20, 2016 at 3:35 PM, Lyle Peterson <lyleap(at)centurylink.net (lyleap(at)centurylink.net)> wrote:
Quote:
I think it is intended for soldering.  I don't see how you would get a slip on terminal to stay on/

You may be able to put an alligator clip or similar as a heat sink on the terminal below the solder area.  It should only take a very few seconds to get a good solder joint. 

On 3/20/2016 5:12 PM, Ken Ryan wrote:

Quote:
Are the terminals on this switch solder only or is there a push on connector that matches?



- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group