Matronics Email Lists :: View topic - Fwd: RV10-List: GARMIN autopilot servos wiring

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fwd: RV10-List: GARMIN autopilot servos wiring

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

trigo(at)mail.telepac.pt
Guest

Posted: Thu Mar 31, 2016 10:45 am Post subject: Fwd: RV10-List: GARMIN autopilot servos wiring

[quote] Thank you Stein

 

 I believe the DYNON servo wires are all unshielded.

 Why do you recommend the CAN, the RS-232 and the trim wires to be shielded?

 

 Best

 Carlos

 

 Enviado do meu iPhone

 

 No dia 30/03/2016, às 10:39, Stein Bruch <stein(at)steinair.com> escreveu:

 

> 

> 

> You would use shielded multi conductor wires for the CAN portion and

> RS-232's (and possibly some trim), but individual wires for the CWS, PWR,

> GND, and CAN termination (if you're using it for the terminator on the CAN).

> 

> 

> Cheers,

> Stein

> 

> 

> --

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum