Matronics Email Lists :: View topic - MX-20 connected to 400W/500W

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

MX-20 connected to 400W/500W - UPDATE

Matronics Email Lists Forum Index -> Avionics-List

View previous topic :: View next topic

Author Message

recapen(at)earthlink.net
Guest

Posted: Wed Jul 06, 2016 10:33 am Post subject: MX-20 connected to 400W/500W - UPDATE

Just to keep everyone in the loop....



There are multiple valid output protocols from the 400W/500W series that work with the MX-20...some have more features than others - the differences are not spelled out in the installation manuals.



Got with the folks at Stark Aviation (I bought most of my gear through his shop), he was able to get an understanding of the differences and pass them to me.  



I was using "Aviation" as the output protocol from my 420W as it is acceptable to both the MX20 and my AFS3400s EFIS.  Come to find out, the software upgrades changed some of the bits making this one a less viable option.  I need to use "MXMap" for the MX20 and wire up two more outputs from the 420W...one for the EFIS and another for the ADS-600B



--

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Avionics-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum