Matronics Email Lists :: View topic - Dynon Pitot AOA placement

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Dynon Pitot AOA placement

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

wdaniell.longport(at)gmai
Guest

Posted: Tue Aug 02, 2016 7:47 am Post subject: Dynon Pitot AOA placement

I did not research this on the forum before closing my wings  - I thought that I would simply place the Dynon Pitot in the same place as the Europa original.  

I have received the dynon and it has a larger surface area that the europa item and therefore will exert more stress on the mounting point.   it also has a larger "footprint"

So the options I see are:

Putting the dynon in the same place as the Europa pitot but with some reinforcement ont he outside.  I am assuming that if the europa pitot works in that position then the dynon should work too.
Making a new hole which I am loath to do.
I saw various options on the forum history including mounting the dynon on the  wing inspection cover.   Has anyone done this? 



thanks

Will





William Daniell



LONGPORT

+57 310 295 0744

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

erichdtrombley(at)juno.co
Guest

Posted: Fri Aug 05, 2016 2:57 pm Post subject: Dynon Pitot AOA placement

Hi Will,

  

 You didn't mention which mounting mast you using, only that you have the Dynon Pitot. Which mast you have will determine options. 

  

 Erich Trombley

 914 Mono Classic

  

  

 William wrote

  

 "I did not research this on the forum before closing my wings  - I thought that I would simply place the Dynon Pitot in the same place as the Europa original.   

I have received the dynon and it has a larger surface area that the europa item and therefore will exert more stress on the mounting point.   it also has a larger "footprint" 

So the options I see are: 



  Putting the dynon in the same place as the Europa pitot but with some reinforcement ont he outside.  I am assuming that if the europa pitot works in that position then the dynon should work too. 
Making a new hole which I am loath to do. 
I saw various options on the forum history including mounting the dynon on the  wing inspection cover.   Has anyone done this?     

  



____________________________________________________________

What Happens When You Take a Testosterone Supplement

If you're like most guys, you love having energy, being able to have a ...

http://thirdpartyoffers.juno.com/TGL3132/57a5197929b3019790bf9st01vuc

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

rampil

Joined: 04 May 2007
Posts: 870

Posted: Sat Aug 06, 2016 7:09 am Post subject: Re: Dynon Pitot AOA placement

Generically speaking, a larger surface mount area implies a lower stress than a smaller area (Force per square inch and all). In the States, an extra ply or two of BID applied through the mounting hole would cover the new screw holes. What the UK requires, I can not begin to comment on.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Ira N224XS

wdaniell.longport(at)gmai
Guest

Posted: Thu Aug 11, 2016 11:23 am Post subject: Dynon Pitot AOA placement

Ira thanks

 Im sure there wont be a problem in colombia with this 

 Will 

On Aug 6, 2016 10:12, "rampil" <ira.rampil(at)gmail.com (ira.rampil(at)gmail.com)> wrote: 	  Quote: 	
		  --> Europa-List message posted by: "rampil" <ira.rampil(at)gmail.com (ira.rampil(at)gmail.com)>

 

 Generically speaking, a larger surface mount area implies a lower stress than a smaller area (Force per square inch and all). In the States, an extra ply or two of BID applied through the mounting hole would cover the new screw holes. What the UK requires, I can not begin to comment on.

 

 --------

 Ira N224XS

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=459264#459264

 

 

 

 

 

 

 

 ====================================

 pa-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Europa-List

 ====================================

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ====================================

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ====================================

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ====================================

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

wdaniell.longport(at)gmai
Guest

Posted: Thu Aug 11, 2016 11:24 am Post subject: Dynon Pitot AOA placement

Eric

 Im using the half mast as opposed to just the probe....if that makes sense

 Will

 On Aug 5, 2016 7:02 PM, "Erich Trombley" <erichdtrombley(at)juno.com (erichdtrombley(at)juno.com)> wrote:

   	  Quote: 	
		  

 	  Quote: 	
		  

  	
 
	


 	  Quote: 	
		   Hi Will,

 >  
	


 > You didn't mention which mounting mast you using, only that you have the Dynon Pitot. Which mast you have will determine options. 

 >  

 > Erich Trombley

 > 914 Mono Classic

 >  

 >  

 > William wrote

 >  

 > "I did not research this on the forum before closing my wings  - I thought that I would simply place the Dynon Pitot in the same place as the Europa original.   

 > I have received the dynon and it has a larger surface area that the europa item and therefore will exert more stress on the mounting point.   it also has a larger "footprint" 

 > So the options I see are: 

 > Putting the dynon in the same place as the Europa pitot but with some reinforcement ont he outside.  I am assuming that if the europa pitot works in that position then the dynon should work too.

 > Making a new hole which I am loath to do.

 > I saw various options on the forum history including mounting the dynon on the  wing inspection cover.   Has anyone done this? 

 >  

 >

 >

 > ____________________________________________________________

 > What Happens When You Take a Testosterone Supplement

 > If you're like most guys, you love having energy, being able to have a ...

 > http://thirdpartyoffers.juno.com/TGL3132/57a5197929b3019790bf9st01vuc

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum