Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

help with a CJ motor that will not start

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
jlpartington(at)reagan.co
Guest





PostPosted: Tue Oct 18, 2016 5:55 am    Post subject: help with a CJ motor that will not start Reply with quote

My cell phone note was less than clear.

I picked up a running CJ motor that had been converted to auto plugs (my first with that mod)

Unfortunately, life interrupted the process and I let the motor sit for several months before I tried to start it.re-stabbed the mags and timed them. Got it to run and started doing other details. Now it will not start.

The valves are clean, ie turns over smoothly, the plugs are sparking outside the cylinders, gas is flowing to carb and drips out if throttle is pumped. Primer has been cleared and tested.

No fire at all. ??? Suggestions?


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
PS



Joined: 08 Sep 2006
Posts: 84
Location: Texas

PostPosted: Tue Oct 18, 2016 6:09 am    Post subject: help with a CJ motor that will not start Reply with quote

Are you using air for the starter? Some seem to have trouble starting on nitrogen, although I never had a problem. Next I would take a look at the start vibrator or shower of sparks lead in the mag. Those go bad, it is an easy fix. It was running, so I would guess the timing is good..
Good luck
Phil

Sent from my iPad

On Oct 18, 2016, at 8:52 AM, jlpartington(at)reagan.com (jlpartington(at)reagan.com) wrote:
Quote:

My cell phone note was less than clear.

I picked up a running CJ motor that had been converted to auto plugs (my first with that mod)

Unfortunately, life interrupted the process and I let the motor sit for several months before I tried to start it.re-stabbed the mags and timed them. Got it to run and started doing other details. Now it will not start.

The valves are clean, ie turns over smoothly, the plugs are sparking outside the cylinders, gas is flowing to carb and drips out if throttle is pumped. Primer has been cleared and tested.

No fire at all. ??? Suggestions?


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
Phil
Back to top
View user's profile Send private message
Ernie



Joined: 11 Jan 2006
Posts: 513

PostPosted: Tue Oct 18, 2016 7:21 am    Post subject: help with a CJ motor that will not start Reply with quote

Bad Gas??

On Tue, Oct 18, 2016 at 9:52 AM, <jlpartington(at)reagan.com (jlpartington(at)reagan.com)> wrote:
Quote:

My cell phone note was less than clear.
 
I picked up a running CJ motor that had been converted to auto plugs (my first with that mod)
 
Unfortunately, life interrupted the process and I let the motor sit for several months before I tried to start it.re-stabbed the mags and timed them.  Got it to run and started doing other details.  Now it will not start.
 
The valves are clean, ie turns over smoothly, the plugs are sparking outside the cylinders, gas is flowing to carb and drips out if throttle is pumped.  Primer has been cleared and tested.  
 
No fire at all. ???  Suggestions?


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group