Matronics Email Lists :: View topic - Undercarriage Nylok Nuts

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Undercarriage Nylok Nuts

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

rv10free2fly(at)yahoo.com
Guest

Posted: Fri Sep 30, 2016 10:22 pm Post subject: Undercarriage Nylok Nuts

When I was at Oshkosh in 2015 I stopped to chat to a poor RV-10 pilot (sorry I can't remember your name, however you had an English accent, so I'm assuming you weren't American, but I digress), who had experienced overheating of his brakes while taxiing in after landing, to the point where the wheel fairing caught fire.



Suffice to say that the undercarriage as a burnt mess.



Considering the potential for overheating of the brakes, I am considering swapping all the Nylok nuts on the undercarriage and brakes with all-metal stop nuts.



Have others adopted a similar course of action as a contingency?



Is there any disadvantage of using the cadmium plated all-metal lock nuts?



Warm regards



Patrick

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

IMG_1605.JPG

Description:

Filesize:

21.21 KB

Viewed:

3746 Time(s)

eagerlee

Joined: 28 Jan 2006
Posts: 35

Posted: Mon Oct 03, 2016 5:30 am Post subject: Re: Undercarriage Nylok Nuts

We replaced all the nylok nuts at the brake calipers with high temperature lock nuts for the very reason you stated - things could get HOT sometimes.

Paul Hahn

N82FF

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Kelly McMullen

Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

Posted: Mon Oct 03, 2016 12:29 pm Post subject: Undercarriage Nylok Nuts

If the nylocs on the calipers get hot enough to fail, you will have already overheated the O rings and likely have brake fluid leaking.



While some have replaced the O-rings of standard MS designation with Viton for heat resistance, there is a lot of mass to dissapate heat in the calipers. Nice to add protection, but the caliper manufacturers seem to mostly use nylock and proably have a good idea the heat stress for those nuts.



-sent from the I-droid implanted in my forearm

 

On Mon, Oct 3, 2016 at 6:30 AM, eagerlee <eagerlee(at)comcast.net (eagerlee(at)comcast.net)> wrote:

 	  Quote: 	
		  --> RV10-List message posted by: "eagerlee" <eagerlee(at)comcast.net (eagerlee(at)comcast.net)>

 

 We replaced all the nylok nuts at the brake calipers with high temperature lock nuts for the very reason you stated - things could get HOT sometimes.

 Paul Hahn

 N82FF

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=460906#460906

 

 

 

 

 

 

 

 ====================================

 -List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List

 ====================================

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ====================================

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ====================================

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ====================================

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD

rv10free2fly(at)yahoo.com
Guest

Posted: Tue Oct 04, 2016 2:57 am Post subject: Undercarriage Nylok Nuts

Many thanks for cementing my thoughts Paul.



Warm regards



Patrick



 	  Quote: 	
		   On 4 Oct 2016, at 00:00, eagerlee <eagerlee(at)comcast.net> wrote:

 

 

 

 We replaced all the nylok nuts at the brake calipers with high temperature lock nuts for the very reason you stated - things could get HOT sometimes.

 Paul Hahn

 N82FF

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=460906#460906

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum