Matronics Email Lists :: View topic - Overvoltage (darn), Alternator for the CJ

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Overvoltage (darn), Alternator for the CJ

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

elmar.hegenauer(at)telus.
Guest

Posted: Thu Feb 21, 2008 9:38 pm Post subject: Overvoltage (darn), Alternator for the CJ

Ok, ok, after watching some of 

 my avionics have been slaughtered

 recently by an overvoltage

 surge, I am willing to switch

 to an alternator system (sorry

 Doug, can't spend any money

 in your department until I've got

 that misery solved).

  

 So, WHERE can I procure an 

 approved conversion  kit for the 

 CJ for a reasonable  price (no arms 

 and legs please, I  still need them for

 flying).

  

 Thanks in advance.

  

 Regards

  

 Elmar

   [quote][b]

ChangDriver

Joined: 15 Sep 2007
Posts: 266

Posted: Fri Feb 22, 2008 6:59 am Post subject: Re: Overvoltage (darn), Alternator for the CJ

Elmar:



The B&C alternator and VR will set you back between $900 and $1000.  If you install yourself, then there is no install cost, otherwise, add about 10 hours or so to install.  For the Housai engine, you also need the M-14 mounting plate with the shaft seal or you'll be spending another $700 real soon to replace the alternator once it gets loaded with oil.



Simple solution is to keep generator and put overvoltage protection on it.  Thanks to Brian, Aeroelectric has a unit designed.  Bob at Aeroelectric will be producing some soon!



Craig

dstroud(at)storm.ca
Guest

Posted: Sat Feb 23, 2008 6:51 am Post subject: Overvoltage (darn), Alternator for the CJ

Craig, who sells the M-14 mounting plate..any idea of cost ? Thanks.



David Stroud   Ottawa, Canada

C-FDWS  Christavia

Fairchild 51 under construction

---

dougsappllc(at)gmail.com
Guest

Posted: Sat Feb 23, 2008 8:15 am Post subject: Overvoltage (darn), Alternator for the CJ

Guys,

 I have some on order from China, don't know if I can meet your time line though as mine are about 60 days away.

 Contact me off list if you have an interest.

 

 

 On Sat, Feb 23, 2008 at 6:51 AM, david stroud <dstroud(at)storm.ca (dstroud(at)storm.ca)> wrote:

 [quote]--> Yak-List message posted by: "david stroud" <dstroud(at)storm.ca (dstroud(at)storm.ca)>

 

Craig, who sells the M-14 mounting plate..any idea of cost ? Thanks.



David Stroud   Ottawa, Canada

C-FDWS  Christavia

Fairchild 51 under construction

---

ChangDriver

Joined: 15 Sep 2007
Posts: 266

Posted: Sun Feb 24, 2008 10:26 am Post subject: Re: Overvoltage (darn), Alternator for the CJ

Guys:



I am looking for a source of the mounting plates.  Also, Barry Hancock has one and is looking into having a machine shop CNC mill them and make them available as a package with the VR and B&C alternator for a complete conversion.



Craig

ChangDriver

Joined: 15 Sep 2007
Posts: 266

Posted: Mon Feb 25, 2008 11:16 am Post subject: Re: Overvoltage (darn), Alternator for the CJ

Alternator mounting plate found.  Contact George Coy at Gesoco in Vermont.



Price is $75.



Phone 802-868-5633



Craig



BTW, George has a full conversion using Skytronics alternator, VR and the plate.

stephen.hayne

Joined: 01 Nov 2013
Posts: 59
Location: United States

Posted: Thu Oct 27, 2016 5:49 am Post subject: Re: Overvoltage (darn), Alternator for the CJ

Update - I am installing a B&C alternator and LS1A regulator in a CJ, and the only place I could find a M14 mounting plate was Jill.  She wants ~$500 for gaskets, seal, mounting plate and gear...

_________________
-
Stephen Hayne, Cyber Security Consultant, Professor Emeritus (retired)
443LM Nanchang CJA
http://selfsynchronize.com/hayne/plane/cj6.asp

Viperdoc

Joined: 19 Apr 2014
Posts: 484
Location: 08A

Posted: Sat Oct 29, 2016 7:12 pm Post subject: Overvoltage (darn), Alternator for the CJ

Talk to directly to B&C. 

Doc



Sent from my iPad



 	  Quote: 	
		   On Oct 27, 2016, at 8:49 AM, stephen.hayne <stephen.hayne(at)gmail.com> wrote:

 

 

 

 Update - I am installing a B&C alternator and LS1A regulator in a CJ, and the only place I could find a M14 mounting plate was Jill.  She wants ~$500 for gaskets, seal, mounting plate and gear...

 

 --------

 -

 Dr. Stephen C. Hayne, Professor, CIS, Colorado State University

    __!__    

 _____(_)_____   666CJ

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=461658#461658

_________________
Viperdoc

stephen.hayne

Joined: 01 Nov 2013
Posts: 59
Location: United States

Posted: Sat Oct 29, 2016 8:20 pm Post subject: Re: Overvoltage (darn), Alternator for the CJ

Yep - already talked to Doug and B&C... both pointed me to Jill - at least they did a month or so ago.

_________________
-
Stephen Hayne, Cyber Security Consultant, Professor Emeritus (retired)
443LM Nanchang CJA
http://selfsynchronize.com/hayne/plane/cj6.asp

Dawg

Joined: 19 May 2013
Posts: 355

Posted: Sun Oct 30, 2016 6:02 am Post subject: Overvoltage (darn), Alternator for the CJ

Interesting N number..



 	  Quote: 	
		   On Oct 29, 2016, at 22:20, stephen.hayne <stephen.hayne(at)gmail.com> wrote:

 

 

 

 Yep - already talked to Doug and B&C... both pointed me to Jill - at least they did a month or so ago.

 

 --------

 -

 Dr. Stephen C. Hayne, Professor, CIS, Colorado State University

    __!__    

 _____(_)_____   666CJ

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=461726#461726

_________________
Dawg

jackpot

Joined: 13 Jul 2010
Posts: 65
Location: Las Vegas, Nevada

Posted: Sun Oct 30, 2016 6:25 am Post subject: Overvoltage (darn), Alternator for the CJ

Kind of like the N number on my Stearman. N69666.   Gary. CJ N22YK



Sent from my iPhone



 	  Quote: 	
		   On Oct 30, 2016, at 07:02, William Geipel <l129bs(at)gmail.com> wrote:

 

 

 

 Interesting N number..

 

> On Oct 29, 2016, at 22:20, stephen.hayne <stephen.hayne(at)gmail.com> wrote:

> 

> 

> 

> Yep - already talked to Doug and B&C... both pointed me to Jill - at least they did a month or so ago.

> 

> --------

> -

> Dr. Stephen C. Hayne, Professor, CIS, Colorado State University

>   __!__    

> _____(_)_____   666CJ

> 

> 

> 

> 

> Read this topic online here:

> 

> http://forums.matronics.com/viewtopic.php?p=461726#461726

> 

> 

> 

> 

> 

> 

> 

> 

> 

>

Viperdoc

Joined: 19 Apr 2014
Posts: 484
Location: 08A

Posted: Sun Oct 30, 2016 7:27 am Post subject: Overvoltage (darn), Alternator for the CJ

Sorry. I was under the impression B&C would supply that. Ask Pappy Goolsby and Graig Payne where the got theirs from.

Doc 



Sent from my iPad



 	  Quote: 	
		   On Oct 29, 2016, at 11:20 PM, stephen.hayne <stephen.hayne(at)gmail.com> wrote:

 

 

 

 Yep - already talked to Doug and B&C... both pointed me to Jill - at least they did a month or so ago.

 

 --------

 -

 Dr. Stephen C. Hayne, Professor, CIS, Colorado State University

    __!__    

 _____(_)_____   666CJ

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=461726#461726

_________________
Viperdoc

GeorgeCoy

Joined: 02 Dec 2010
Posts: 310

Posted: Sun Oct 30, 2016 7:37 am Post subject: Overvoltage (darn), Alternator for the CJ

As I recall you only need him 14 P type of generator adapter that has a seal. We have them in stock



Sent from my iPhone



 	  Quote: 	
		   On Oct 30, 2016, at 11:27 AM, Roger Kemp <f16viperdoc(at)me.com> wrote:

 

 

 

 Sorry. I was under the impression B&C would supply that. Ask Pappy Goolsby and Graig Payne where the got theirs from.

 Doc 

 

 Sent from my iPad

 

> On Oct 29, 2016, at 11:20 PM, stephen.hayne <stephen.hayne(at)gmail.com> wrote:

> 

> 

> 

> Yep - already talked to Doug and B&C... both pointed me to Jill - at least they did a month or so ago.

> 

> --------

> -

> Dr. Stephen C. Hayne, Professor, CIS, Colorado State University

>   __!__    

> _____(_)_____   666CJ

> 

> 

> 

> 

> Read this topic online here:

> 

> http://forums.matronics.com/viewtopic.php?p=461726#461726

> 

> 

> 

> 

> 

> 

> 

> 

> 

>

stephen.hayne

Joined: 01 Nov 2013
Posts: 59
Location: United States

Posted: Sun Oct 30, 2016 7:38 am Post subject: Re: Overvoltage (darn), Alternator for the CJ

N-number:  well, I am restoring/rebuilding the plane from crate, and am seriously thinking of calling it "Zombie"... leaving in a "rat rod" look, with appropriate nose art.



Basically, no repaint.  



Just finished recovering the control surfaces, installing Malcolm hood.  Anything that comes off, goes back on in perfect condition... so the rat rod look is starting to be hard to pull off.  I'm hoping I'm about 6 weeks from taxi tests!

_________________
-
Stephen Hayne, Cyber Security Consultant, Professor Emeritus (retired)
443LM Nanchang CJA
http://selfsynchronize.com/hayne/plane/cj6.asp

Viperdoc

Joined: 19 Apr 2014
Posts: 484
Location: 08A

Posted: Sun Oct 30, 2016 7:49 am Post subject: Overvoltage (darn), Alternator for the CJ

👍

Doc



Sent from my iPad



 	  Quote: 	
		   On Oct 30, 2016, at 10:37 AM, George Coy <george.coy(at)gmail.com> wrote:

 

 

 

 As I recall you only need him 14 P type of generator adapter that has a seal. We have them in stock

 

 Sent from my iPhone

 

> On Oct 30, 2016, at 11:27 AM, Roger Kemp <f16viperdoc(at)me.com> wrote:

> 

> 

> 

> Sorry. I was under the impression B&C would supply that. Ask Pappy Goolsby and Graig Payne where the got theirs from.

> Doc 

> 

> Sent from my iPad

> 

>> On Oct 29, 2016, at 11:20 PM, stephen.hayne <stephen.hayne(at)gmail.com> wrote:

>> 

>> 

>> 

>> Yep - already talked to Doug and B&C... both pointed me to Jill - at least they did a month or so ago.

>> 

>> --------

>> -

>> Dr. Stephen C. Hayne, Professor, CIS, Colorado State University

>>  __!__    

>> _____(_)_____   666CJ

>> 

>> 

>> 

>> 

>> Read this topic online here:

>> 

>> http://forums.matronics.com/viewtopic.php?p=461726#461726

_________________
Viperdoc

Dawg

Joined: 19 May 2013
Posts: 355

Posted: Sun Oct 30, 2016 9:56 am Post subject: Overvoltage (darn), Alternator for the CJ

No comment.



Sent from my Samsung Galaxy smartphone.



-------- Original message --------

From: Gary Gabbard <ggg6(at)att.net> 

Date:10/30/2016  08:25  (GMT-07:00) 

To: yak-list(at)matronics.com 

Cc:  

Subject: Re: Yak-List: Re: Overvoltage (darn), Alternator for the CJ

_________________
Dawg

cjpilot710(at)aol.com
Guest

Posted: Sun Oct 30, 2016 11:26 am Post subject: Overvoltage (darn), Alternator for the CJ

I forgot where I got mind.  But they should not cost $500.  That's my opinion of course.

 Jim "Pappy" Goolsby

    

  

     

  

     

  

    --

Viperdoc

Joined: 19 Apr 2014
Posts: 484
Location: 08A

Posted: Sun Oct 30, 2016 11:40 am Post subject: Overvoltage (darn), Alternator for the CJ

George Coy said he had them.

Doc



Sent from my iPad



On Oct 30, 2016, at 2:26 PM, "\"" <cjpilot710(at)aol.com (cjpilot710(at)aol.com)> <cjpilot710(at)aol.com (cjpilot710(at)aol.com)> wrote:

[quote]I forgot where I got mind.  But they should not cost $500.  That's my opinion of course.

 Jim "Pappy" Goolsby

    

  

     

  

     

  

    --

_________________
Viperdoc

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum