Matronics Email Lists :: View topic - Conduit and adding wires

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Conduit and adding wires

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

wschertz343(at)gmail.com
Guest

Posted: Wed Jan 04, 2017 11:00 am Post subject: Conduit and adding wires

One other technique for adding a wire to an existing conduit if you don't 

have the embedded string is to take a length of 1/4" polyethylene tubing, 

run it down the existing conduit (may have to occasionally turn it) it is 

stiff enough to allow you to install it, then run the wire into the tube, 

fasten the far end and pull the tube back out. The slippery nature of the 

tubing makes pushing the wire through easy,.



Bill Schertz

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum