Matronics Email Lists :: View topic - Stall

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Stall - Stall

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

JOHN TIPTON

Joined: 17 Sep 2006
Posts: 239
Location: Torquay - England

Posted: Fri Feb 03, 2017 4:53 am Post subject: Stall - Stall

Hi Guys

My granddaughter has some dolls that talk, how can one modify (or construct ones own) a  voice generator that says: (for obvious reasons) Stall Stall

Regards: John

alec(at)alecmyers.com
Guest

Posted: Fri Feb 03, 2017 5:34 am Post subject: Stall - Stall

You could



1. if there's a memory chip you could reprogram it, or replace it with one with your own data



2. you could replace part of the circuit with a microcontroller of your own to bash out your own audio but use the same output stage - amplifier and speaker. Two seconds of 8kHz sampled audio is 16KBytes, or half that if you use 4 bit samples. You could find a microcontroller with enough memory or use an external memory chip. Any $1 microcontroller now has a D to A, or you can bit-bash your own with a resistor ladder or 4 or 8 bit PWM output



3. you could build your own system from scratch and put it in the doll

On 3Feb2017, at 1:53 PM, JOHN TIPTON <jmtipton(at)btopenworld.com> wrote:






Hi Guys

My granddaughter has some dolls that talk, how can one modify (or construct ones own) a  voice generator that says: (for obvious reasons) Stall Stall

Regards: John





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=465685#465685

yellowduckduo(at)gmail.co
Guest

Posted: Fri Feb 03, 2017 5:39 am Post subject: Stall - Stall

I am using an older ISD1730 evaluation board that was around $10. from 

digi-key for 3 different voice warnings on my amphib.

Today I'd start by looking at something like this

https://www.sparkfun.com/products/retired/10653

and I'd google "arduino voice recorder"

Ken



On 03/02/2017 7:53 AM, JOHN TIPTON wrote:

 	  Quote: 	
		   



 Hi Guys

 My granddaughter has some dolls that talk, how can one modify (or construct ones own) a  voice generator that says: (for obvious reasons) Stall Stall

 Regards: John

alec(at)alecmyers.com
Guest

Posted: Fri Feb 03, 2017 5:45 am Post subject: Stall - Stall

Someone's done all the hard work for you ...

https://learn.adafruit.com/adafruit-audio-fx-sound-board

On 3Feb2017, at 2:36 PM, C&K <yellowduckduo(at)gmail.com> wrote:






I am using an older ISD1730 evaluation board that was around $10. from digi-key for 3 different voice warnings on my amphib.

Today I'd start by looking at something like this

https://www.sparkfun.com/products/retired/10653

and I'd google "arduino voice recorder"

Ken



On 03/02/2017 7:53 AM, JOHN TIPTON wrote:

 	  Quote: 	
		   

 

 Hi Guys

 My granddaughter has some dolls that talk, how can one modify (or construct ones own) a  voice generator that says: (for obvious reasons) Stall Stall

 Regards: John

JOHN TIPTON

Joined: 17 Sep 2006
Posts: 239
Location: Torquay - England

Posted: Fri Feb 03, 2017 5:45 am Post subject: Stall - Stall

Answer 1)  How ?

Answer 2). How ?

Answer 3)  How ? (doll = aeroplane)



Sent from my iPad



     ----x--O--x----



 	  Quote: 	
		   On 3 Feb 2017, at 01:32 pm, Alec Myers <alec(at)alecmyers.com> wrote:

 

 

 

 You could

 

 1. if there's a memory chip you could reprogram it, or replace it with one with your own data

 

 2. you could replace part of the circuit with a microcontroller of your own to bash out your own audio but use the same output stage - amplifier and speaker. Two seconds of 8kHz sampled audio is 16KBytes, or half that if you use 4 bit samples. You could find a microcontroller with enough memory or use an external memory chip. Any $1 microcontroller now has a D to A, or you can bit-bash your own with a resistor ladder or 4 or 8 bit PWM output

 

 3. you could build your own system from scratch and put it in the doll

 

 

 On 3Feb2017, at 1:53 PM, JOHN TIPTON <jmtipton(at)btopenworld.com> wrote:

 

 

 

 Hi Guys

 My granddaughter has some dolls that talk, how can one modify (or construct ones own) a  voice generator that says: (for obvious reasons) Stall Stall

 Regards: John

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=465685#465685

JOHN TIPTON

Joined: 17 Sep 2006
Posts: 239
Location: Torquay - England

Posted: Fri Feb 03, 2017 5:55 am Post subject: Stall - Stall

Ken

Thank you: that's the type of answer that helps

Regards: John



Sent from my iPad



     ----x--O--x----



 	  Quote: 	
		   On 3 Feb 2017, at 01:43 pm, Alec Myers <alec(at)alecmyers.com> wrote:

 

 

 

 Someone's done all the hard work for you ...

 

 

 https://learn.adafruit.com/adafruit-audio-fx-sound-board

 

 

 On 3Feb2017, at 2:36 PM, C&K <yellowduckduo(at)gmail.com> wrote:

 

 

 

 I am using an older ISD1730 evaluation board that was around $10. from digi-key for 3 different voice warnings on my amphib.

 Today I'd start by looking at something like this

 https://www.sparkfun.com/products/retired/10653

 and I'd google "arduino voice recorder"

 Ken

 

> On 03/02/2017 7:53 AM, JOHN TIPTON wrote:

> 

> 

> Hi Guys

> My granddaughter has some dolls that talk, how can one modify (or construct ones own) a  voice generator that says: (for obvious reasons) Stall Stall

> Regards: John

JOHN TIPTON

Joined: 17 Sep 2006
Posts: 239
Location: Torquay - England

Posted: Fri Feb 03, 2017 5:56 am Post subject: Stall - Stall

Alec

Thank you

John



Sent from my iPad



     ----x--O--x----



 	  Quote: 	
		   On 3 Feb 2017, at 01:43 pm, Alec Myers <alec(at)alecmyers.com> wrote:

 

 

 

 Someone's done all the hard work for you ...

 

 

 https://learn.adafruit.com/adafruit-audio-fx-sound-board

 

 

 On 3Feb2017, at 2:36 PM, C&K <yellowduckduo(at)gmail.com> wrote:

 

 

 

 I am using an older ISD1730 evaluation board that was around $10. from digi-key for 3 different voice warnings on my amphib.

 Today I'd start by looking at something like this

 https://www.sparkfun.com/products/retired/10653

 and I'd google "arduino voice recorder"

 Ken

 

> On 03/02/2017 7:53 AM, JOHN TIPTON wrote:

> 

> 

> Hi Guys

> My granddaughter has some dolls that talk, how can one modify (or construct ones own) a  voice generator that says: (for obvious reasons) Stall Stall

> Regards: John

ceengland7(at)gmail.com
Guest

Posted: Fri Feb 03, 2017 6:24 am Post subject: Stall - Stall

I've seen birthday cards that let  you record your own audio message. Gutting one of those might be the easiest way to do what you want, if you have some soldering skills. 

Charlie

On Fri, Feb 3, 2017 at 7:53 AM, John Tipton <jmtipton(at)btopenworld.com (jmtipton(at)btopenworld.com)> wrote:

 	  Quote: 	
		  --> AeroElectric-List message posted by: John Tipton <jmtipton(at)btopenworld.com (jmtipton(at)btopenworld.com)>

 Alec

 Thank you

 John

 Sent from my iPad

      ----x--O--x----

 > On 3 Feb 2017, at 01:43 pm, Alec Myers <alec(at)alecmyers.com (alec(at)alecmyers.com)> wrote:

 >

 > --> AeroElectric-List message posted by: Alec Myers <alec(at)alecmyers.com (alec(at)alecmyers.com)>

 >

 > Someone's done all the hard work for you ...

 >

 >

 > https://learn.adafruit.com/adafruit-audio-fx-sound-board

 >

 >

user9253

Joined: 28 Mar 2008
Posts: 1920
Location: Riley TWP Michigan

Posted: Fri Feb 03, 2017 6:49 am Post subject: Re: Stall - Stall

I have used an "ISD1820 Voice Record Module" with success:

eBay item number: 201708883118 $1.63 with free shipping.

It takes one month to ship from China.

_________________
Joe Gores

yellowduckduo(at)gmail.co
Guest

Posted: Fri Feb 03, 2017 7:29 am Post subject: Stall - Stall

I have used many of the Chinese knockoffs for cheap experiments or where 

saving pennies is important but expect zero support for the product 

other than free replacement if you get a dud.

For a one off or first time project I recommend using adafruit.com or 

sparkfun.com or similar vendors to increase the chances of success with 

greatly reduced aggravation.

Minor changes in some of these products can chew up a lot of time 

sorting things out.

Ken



On 03/02/2017 9:49 AM, user9253 wrote:

 	  Quote: 	
		   



 I have used an "ISD1820 Voice Record Module" with success:

 eBay item number: 201708883118 $1.63 with free shipping.

 It takes one month to ship from China.



 --------

 Joe Gores





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=465699#465699

rampil

Joined: 04 May 2007
Posts: 870

Posted: Sat Feb 04, 2017 6:30 am Post subject: Re: Stall - Stall

All of this discussion presupposes that the OP knows how to get a signal line out of an EFIS or an AOA device, or a stall horn switch and send it to

a memory/DAC system (i.e., a voice generator) to trigger an annunciation event. It is not hard, but not trivial and depends on the specifics of the

target hardware

_________________
Ira N224XS

Eric M. Jones

Joined: 10 Jan 2006
Posts: 565
Location: Massachusetts

Posted: Sat Feb 04, 2017 7:31 am Post subject: Re: Stall - Stall

Great subject. DX.com has several of these for a few bucks. They have reasonably fast shipping. 



Two thoughts: This is a perfect place to put a perfect female voice from a coworker, sister, friend, etc. 



The Air Forces uses audio warnings extensively. The potential uses for these is mind boggling.



A Guerrilla group in San Francisco bought a load of GI Joes and Talking Barbies and swapped the chips and returned them for credit. Now the GI Joes said sweetly, "Let's go shopping!" and the Barbies said, "Take that hill !"



Eric

_________________
Eric M. Jones
www.PerihelionDesign.com
113 Brentwood Drive
Southbridge, MA 01550
(508) 764-2072
emjones(at)charter.net

yellowduckduo(at)gmail.co
Guest

Posted: Sat Feb 04, 2017 9:33 am Post subject: Stall - Stall

Lots of room to have fun but I had to use my own voice.

We males may be programmed to pay more attention to female voices but 

the ones around me were too smart to let their voices become "bitch'in 

betty" 

Of course a large part of audio warning success is to avoid nuisance 

warnings that train our brains to ignore them.

Ken

do not archive



On 04/02/2017 10:31 AM, Eric M. Jones wrote:

 	  Quote: 	
		   



 Great subject. DX.com has several of these for a few bucks. They have reasonably fast shipping.



 Two thoughts: This is a perfect place to put a perfect female voice from a coworker, sister, friend, etc.



 The Air Forces uses audio warnings extensively. The potential uses for these is mind boggling.



 Eric



 --------

 Eric M. Jones

 www.PerihelionDesign.com

 113 Brentwood Drive

 Southbridge, MA 01550

 (508) 764-2072

 emjones(at)charter.net





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=465743#465743

billhuntersemail(at)gmail
Guest

Posted: Sat Feb 04, 2017 9:34 am Post subject: Stall - Stall

In the late 1970's when we were living in Silicon Valley my dad had a start up high tech electronics firm. Since he was in the business he had lots of friends from all over the world who were all in Silicon Valley dreaming up all kinds of futuristic ideas. 



One such friend came over one night and he had a very small PC board with an integrated chip and a small microphone. This device would capture about 5 to 10 seconds of audio and record it in solid state on the chip... wow... no spinning records or magnetic tape. 

We all sat around the kitchen table and played with it and laughed and try to dream up ways that this device could be used. We had such ideas as a teddy bear, greeting card, Christmas ornament but that was about the extent of our creativity.

Fast forward 20 to 40 years and it is shocking that so many devices still use a goofy synthetic voice to say things like "autopilot"  or "too low flaps"  instead of a device with a recorded sexy female real person voice. 



Bill Hunter 



On Feb 4, 2017 08:40, "Eric M. Jones" <emjones(at)charter.net (emjones(at)charter.net)> wrote: 	  Quote: 	
		  --> AeroElectric-List message posted by: "Eric M. Jones" <emjones(at)charter.net (emjones(at)charter.net)>

 

 Great subject. DX.com has several of these for a few bucks. They have reasonably fast shipping.

 

 Two thoughts: This is a perfect place to put a perfect female voice from a coworker, sister, friend, etc.

 

 The Air Forces uses audio warnings extensively. The potential uses for these is mind boggling.

 

 Eric

 

 --------

 Eric M. Jones

 www.PerihelionDesign.com

 113 Brentwood Drive

 Southbridge, MA 01550

 (508) 764-2072

 emjones(at)charter.net

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=465743#465743

 

 

 

 

 

 

 ====================================

  -

 Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List

 ====================================

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ====================================

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ====================================

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ====================================

billhuntersemail(at)gmail
Guest

Posted: Sat Feb 04, 2017 9:45 am Post subject: Stall - Stall

I also just remembered that in the late 1990s I was interviewing for a corporate Jet Pilot position with a Silicon Valley firm that was purchasing their first jet. 



During the interview I asked what their product line was and the principle explain to me that they had just invented a computer chip that could record 1000 songs on it. I remember him looking across the conference table and pointed to his thumbnail and said that this ship was only the size of a person's thumb nail and that it could record 1000 songs. I was amazed because a compact disc at the time would only record 40 songs. 

He said that he could not elaborate more about the product nor could he tell me what other companies he was going to be a vendor for with this revolutionary new product.



Bill Hunter 





On Feb 4, 2017 10:31, "William Hunter" <billhuntersemail(at)gmail.com (billhuntersemail(at)gmail.com)> wrote: 	  Quote: 	
		  In the late 1970's when we were living in Silicon Valley my dad had a start up high tech electronics firm. Since he was in the business he had lots of friends from all over the world who were all in Silicon Valley dreaming up all kinds of futuristic ideas. 



One such friend came over one night and he had a very small PC board with an integrated chip and a small microphone. This device would capture about 5 to 10 seconds of audio and record it in solid state on the chip... wow... no spinning records or magnetic tape. 

We all sat around the kitchen table and played with it and laughed and try to dream up ways that this device could be used. We had such ideas as a teddy bear, greeting card, Christmas ornament but that was about the extent of our creativity.

Fast forward 20 to 40 years and it is shocking that so many devices still use a goofy synthetic voice to say things like "autopilot"  or "too low flaps"  instead of a device with a recorded sexy female real person voice. 



Bill Hunter 



On Feb 4, 2017 08:40, "Eric M. Jones" <emjones(at)charter.net (emjones(at)charter.net)> wrote: 	  Quote: 	
		  --> AeroElectric-List message posted by: "Eric M. Jones" <emjones(at)charter.net (emjones(at)charter.net)>

 

 Great subject. DX.com has several of these for a few bucks. They have reasonably fast shipping.

 

 Two thoughts: This is a perfect place to put a perfect female voice from a coworker, sister, friend, etc.

 

 The Air Forces uses audio warnings extensively. The potential uses for these is mind boggling.

 

 Eric

 

 --------

 Eric M. Jones

 www.PerihelionDesign.com

 113 Brentwood Drive

 Southbridge, MA 01550

 (508) 764-2072

 emjones(at)charter.net

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=465743#465743

 

 

 

 

 

 

 ====================================

  -

 Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List

 ====================================

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ====================================

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ====================================

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ====================================

ceengland7(at)gmail.com
Guest

Posted: Sat Feb 04, 2017 9:52 am Post subject: Stall - Stall

No voice actor royalties. 



On a more serious note. There was an article some months ago about a DIY stick shaker. I wonder if that might be a more effective alert tool for stall warning than any visual or audio alert. I'd never considered making one, but the execution would be relatively simple, as long as you have a signal source.

Charlie



On Sat, Feb 4, 2017 at 11:31 AM, William Hunter <billhuntersemail(at)gmail.com (billhuntersemail(at)gmail.com)> wrote:

 	  Quote: 	
		  In the late 1970's when we were living in Silicon Valley my dad had a start up high tech electronics firm. Since he was in the business he had lots of friends from all over the world who were all in Silicon Valley dreaming up all kinds of futuristic ideas. 



One such friend came over one night and he had a very small PC board with an integrated chip and a small microphone. This device would capture about 5 to 10 seconds of audio and record it in solid state on the chip... wow... no spinning records or magnetic tape. 

We all sat around the kitchen table and played with it and laughed and try to dream up ways that this device could be used. We had such ideas as a teddy bear, greeting card, Christmas ornament but that was about the extent of our creativity.

Fast forward 20 to 40 years and it is shocking that so many devices still use a goofy synthetic voice to say things like "autopilot"  or "too low flaps"  instead of a device with a recorded sexy female real person voice. 



Bill Hunter 



On Feb 4, 2017 08:40, "Eric M. Jones" <emjones(at)charter.net (emjones(at)charter.net)> wrote: 	  Quote: 	
		  --> AeroElectric-List message posted by: "Eric M. Jones" <emjones(at)charter.net (emjones(at)charter.net)>

 

 Great subject. DX.com has several of these for a few bucks. They have reasonably fast shipping.

 

 Two thoughts: This is a perfect place to put a perfect female voice from a coworker, sister, friend, etc.

 

 The Air Forces uses audio warnings extensively. The potential uses for these is mind boggling.

 

 Eric

 

 --------

 Eric M. Jones

 www.PerihelionDesign.com

 113 Brentwood Drive

 Southbridge, MA 01550

 [url=tel:(508)%20764-2072](508) 764-2072[/url]

 emjones(at)charter.net

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=465743#465743

 

 

 

 

 

 

 ===========

  -

 Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List

 ===========

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ===========

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ===========

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum